If I've defined borders for a range of cells and then, changing my mind, change it to "No Borders", those cells are still different than the normal, non-formated cells. Is there a way to get back the default cell bounders?
View 3 Replies
I have my buttons working, but I need too have it return to the default printer after a button is used. If I send it too PDF it will not let me print it. Is there a way too go back too default printer each time?
View 2 Replies View RelatedI'm not sure what I have done but one of my workbooks colour scheme has changed. When viewing the workbook cells are now grey and the lies are a lighter grey. When printing though it prnts as it would normally ie a white backgorund. It looks like the viewing colours have been reversed and I can not find out how to revery back to normal.
View 3 Replies View RelatedI have designed a form with Grey horizontal borders.
When I print to my HP LaserJet 2420, the borders are black.
I have other forms with Grey borders where the borders print Grey.
I have not chosen to print Black and White in Page Setup.
How do I correct this?
I am having a hard time understanding why the following code (i am avoiding the select procedure on purpose) doesn't work:
Code:
Function APMS_Border(Namesheet As Variant, Mode As Variant, RowStart As Variant, ColStart As Variant, RowEnd As Variant, ColEnd As Variant, LeftBorder As Variant, TopBorder As Variant, RightBorder As Variant, BottomBorder As Variant, InterColor As Variant)
Dim BorderMatrix() As Variant
[Code]....
it only draws the left border of my range, am i missing something?
The code below is self explanatory but it does not undo the border related formatting. Can you please guide and help me figure out my mistake. The attached image shows the worksheet that I am using....
View 9 Replies View RelatedI have a spreadsheet that I'm working on and I'd like to include a beforesave macro to format the spreadsheet. Basically I need a macro to select all rows with data in column 'a' and add a thick border to the top of the cells. Ideally the border would stop at column 'i' but that's not essential. I've attached an example of what I'd like. I've included 2 sheets 1 called 'before' and 1 called 'after'. They show what I'm after.
View 3 Replies View RelatedI'm looking for the least amount of code to apply a border around every cell in a selected range. The standard With Selection approach is to go through six times for the sides, top, bottom, and insides, which results in a lot of code.
I attempted a single code line approach (Selection.Borders.LineStyle = xlContinuous), but I cannot seem to influence the color or thickness of the line. I'm not looking for fancy here...standard xlThin in black color is all I need.
I have made a toggle button to turn diagonal borders on and off in a single cell. Is there a way to make the button transparent, such that the button can be placed over the cell itself and the contents of the cell will be visible underneath, no matter the condition of the toggle?
View 8 Replies View RelatedIs there a way to format any row in the workbook based on text value in VBA?
e.g. If I type "BLANK" in any row of a worksheet, then the certain cells in that particular row will Format Borders xlDiagonalUp (D:G,K).
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I know this is a sooo basic question but I can not for the life of me remember how.....
when I am on a excel sheet I can not seem to move from quare to square qiththe arrow keys.
It just now takes me all the way to the left or all the way to the right and not from cell to cell from left to right.
I know its something rather simple yet I can not seem to figure this out.
I have no problem with this on 2003pro.
With "edit directly in cell" turned off, if you double click through in a cell containing a formula to the cell being refferenced, is there a quick way of getting back to the original cell you clicked on?
View 9 Replies View RelatedI have to macros I'm working with the first take a user set range and prints the . Address to a cell.
The second Macro I'm trying to get to look at that cell and pull out the range. So is there an opposite fuction to .
Address that will convert excel format to a VBA Range format. Ex A cell with $A$1:$A$2 to Range("A1",A2")
Macro 1
Code:
For j = 1 To x
c = 1
For i = 1 To ws.Range("AD" & rc).Value
ws.Range("AE" & rc).Value = Application.InputBox
(Prompt:="What is the Heading of Data set #" & c & " Table " & tc & " This entry may repeat", Type:=8)
[Code] .........
Macro 2
Code:
'A lot of code here but I want to be able to set multiple ranges to the ranges list in the cell values.
rng(2) = sh(0).Range("AG2").Value
How to read and set a cell backcolor in VBA ?
I've tried all sorts of things ( interior. colour, interior.colorIndex) but nothing gets the correct color.
macro which can paste the value from A1, to another B1 and when A1 is edited again, pasted it in B2. This will probably go on and on until B30. I have tried the if else then in Macro, and even the if elseif, but both don't go futher than B2. E.G A1=1 B1=1 A1=4 B2=4 A1=3 then nothing happens to B3. If there is a way to make this work, it will be great. The way i am tryin to get it is to have =if(B1="","",1) for each cell from C1:30 and with C31 the formula "=count(C1:C30)+1". Then i formated C31 to a custom and make it so that before numbers, there is an B. This means that if B1,2,3 and 4 and numbers in them, then C31 will read B5. That will be the cell i want my next record to go. I would prefer it if there is just a code that i can enter that will go to the next cell when it knows the current cell has a digit in it but if i have to, the count way will do,
View 9 Replies View RelatedI have a worksheet with pricing & part numbers on sheet1. I put a formula on sheet2 that puts the lowest price in colum C of sheet2. Now I need to also get the part number from the cell before. So if the lowest price is in cell E3 I need to also get the part number in D3, and put it in B3.
I've been asked to make an Excel spreadsheet for work that tracks each employee's gross earnings, deductions, and net earnings, as well as calculates the holiday pay. I'm mostly done, but I've run into a problem.
Holiday pay is 4% of the gross earnings. I've got gross earnings in column B, and the formula in the holiday pay column is =PRODUCT(BX,0.04), where X is the row (i.e. in row 4, it is =PRODUCT(B4,0.04).) However, if the cell in BX is empty, the holiday pay displays as 0.04. So for whatever reason, it is assuming that the value of an empty cell is 1. Now, I can solve this by manually entering 0 into every gross earning cell.
I am working on a production spreadsheet, and I'm trying to figure out the easiest way for my coworkers to enter data into the system. Each shift, we produce from 5-20 different varieties of chips, and we keep track of how much we've made of each. I've decided that a simple ADD and DEL button at the end of each row will work (unless anyone can think of something easier or better, let me know pls).
Cell G3:G30 is where data will be stored for each variety. The default value for each variety is stored in column C. I found a very basic macro that adds a value to a selected cell, but I wish for it to find the default quantity for the variety in that row (changes day to day as per our schedule), and add it to the value in column G. The DEL button will do just the opposite.
I have 3 worksheets that I need this macro in as well (days, afternoons, midnights), but I don't think that will be any problem. I've searched around for a solution, to no avail.
i want a cell to always show the default value of "tier 1" if its empty.
VBA code in worksheet won't revert a changed cells color back to 0(white) after removing the comment.
Observations: code does set the desired cell colors to Yellow after inserting a comment, however removing said comment, and re-activating the worksheet does NOT reset the color after deactivating/re-activating the worksheet.
[Code] ......
I need to copy a changing source cell, paste its value into another specific cell (always the same), and then return to the source cell for continued action (ie range selection, copy & value paste, which I can code).
This action is then followed in the next cell to the R of the first cell copied, etc to end of data. I can code the move to the R.
How do I return to the source cells as part of a loop?
Specific notes included in attached - I hope I've explained it clearly.
Code:
Private Sub ComboBox1_Change()
ActiveCell = Me.ComboBox1.Value
End Sub
How do I get focus back to the sheet or cell instead of the ComboBox ?
I need a cell to display a default value (something like "Input Here") which a user can overwrite with a value. When the value is erased, the cell should return to the default. Preferably, it'd be great if the cell reset to the default value whenever the workbook is opened as well (i.e. won't save the user's input value).
View 2 Replies View RelatedI would like to change the default color of any excel sheet I use to grey from the standard white and I am struggling to find out how this is achieved.
In other words, I am trying to have all cells in the sheets I work with appear grey on my screen by default. A coworker of mine used to work in banking and she has grey cells but does not know how she changed them.
Is it possible to get the value of the E39 cell, and use that value as the default text for a text box in a user form?
View 2 Replies View RelatedIs it possible to set the default contents of a cell instead of having it blank? I want a cell to say "No Data" if you have not entered any data into that cell, and when you do, then it is replaced by whatever you entered. If you delete the contents of the cell, it goes back to the "No Data". Hence the "No Data" being the default contents of the cell.
View 5 Replies View RelatedIn a worksheet, I should have selected the region where data is present, and center align all the cells. Instead, I selected the entire worksheet and did the same, so that whenever new data comes in the relative cells are already formatted. This has caused the workbook size to increase dramatically. (So, I assume that changing a cell property from the default value uses some memory). Is there a way to restore the format of the blank cells to the default values, so that memory is freed and the workbook size decreases again?
View 3 Replies View RelatedI'm trying to make cell values in a range change so they appear blank when a checkbox is checked, and when it is unchecked, I need the original value to appear. I have the following so far:
Private Sub CheckBox1_Click()
If CheckBox1.Value = True Then Range("BTS").Value = ""
End Sub
...However I do not know how to change the cells back to the original value before it was made blank.
I am running an Index, Match off of totals, what I would like to do is when the formula finds the column_index_num to move up one row and bring that value back.
For example: if I am going to sheet2 and my formula would normally pull back the information on row 7 with a column_index_num of 5 (or column E), I want to bring back the information on row 6 column E.
How do I add the variable to bring back the information one cell above?
