Is there a way to format any row in the workbook based on text value in VBA?
e.g. If I type "BLANK" in any row of a worksheet, then the certain cells in that particular row will Format Borders xlDiagonalUp (D:G,K).
This piece of code is run from a form when the user click OK. It dumps the data the user filled in on the form, below the last row on the sheet.
View 2 Replies View RelatedHow to format a cell to be normal color unless cell left of it is not empty and this cell is empty.
And I need to format whole sheet to this rule.
Is it possible to do the following?
if cell A1 = 6 and cell A2 =5.8 (0.2 below A1) colour cell A2 orange
if cell A1 = 6 and cell A2 =5.5 or below (0.5 or more below A1) colour cell A2 red
if cell A1 = 6 and cell A2 =6.2 / 6.5 / 6.8 (0.2/0.5/0.8 above A1) colour cell A2 green
if cell A1 = 6 and cell A2 =7.2 or above (1.2 or above A1) colour cell A2 green
I have a spread sheet I use to track tools. One tool may be checked out / returned several times a week. When I do custom sorting I end up with the Tools listed neatly by date and number. EX: ...
View 10 Replies View RelatedI would like to add a value to a cell. The value in this cell will either be 1, 2, 3 or 4.
The value of this cell needs to be "1", if the cell to its left is "Red".
The value of this cell needs to be "2", if the cell to its left is "Purple".
The value of this cell needs to be "3", if the cell to its left is "Green".
The value of this cell needs to be "4", if the cell to its left is "Blue".
I believe I need to find the HEX values for the colors, but that is no problem, I just need the formula of the function if you know it.
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies View RelatedI have designed a form with Grey horizontal borders.
When I print to my HP LaserJet 2420, the borders are black.
I have other forms with Grey borders where the borders print Grey.
I have not chosen to print Black and White in Page Setup.
How do I correct this?
I am having a hard time understanding why the following code (i am avoiding the select procedure on purpose) doesn't work:
Code:
Function APMS_Border(Namesheet As Variant, Mode As Variant, RowStart As Variant, ColStart As Variant, RowEnd As Variant, ColEnd As Variant, LeftBorder As Variant, TopBorder As Variant, RightBorder As Variant, BottomBorder As Variant, InterColor As Variant)
Dim BorderMatrix() As Variant
[Code]....
it only draws the left border of my range, am i missing something?
The code below is self explanatory but it does not undo the border related formatting. Can you please guide and help me figure out my mistake. The attached image shows the worksheet that I am using....
View 9 Replies View RelatedIf I've defined borders for a range of cells and then, changing my mind, change it to "No Borders", those cells are still different than the normal, non-formated cells. Is there a way to get back the default cell bounders?
View 3 Replies View RelatedI have a spreadsheet that I'm working on and I'd like to include a beforesave macro to format the spreadsheet. Basically I need a macro to select all rows with data in column 'a' and add a thick border to the top of the cells. Ideally the border would stop at column 'i' but that's not essential. I've attached an example of what I'd like. I've included 2 sheets 1 called 'before' and 1 called 'after'. They show what I'm after.
View 3 Replies View RelatedI'm looking for the least amount of code to apply a border around every cell in a selected range. The standard With Selection approach is to go through six times for the sides, top, bottom, and insides, which results in a lot of code.
I attempted a single code line approach (Selection.Borders.LineStyle = xlContinuous), but I cannot seem to influence the color or thickness of the line. I'm not looking for fancy here...standard xlThin in black color is all I need.
I have made a toggle button to turn diagonal borders on and off in a single cell. Is there a way to make the button transparent, such that the button can be placed over the cell itself and the contents of the cell will be visible underneath, no matter the condition of the toggle?
View 8 Replies View RelatedI have a column that is giving unwanted value . dont know the reason as that excel file has been created by some other guy and I just started working on it .
My Question is how to move to 2 cells left(A for example) from from that unwanted value column. and check if
A is equal to cell above it , means B Cell(Row above A but same column).
As my excel file is totally based on Forms, Macros, I am not quite familiar with macros.
Is there any way to put if condition in one cell (column) and drag it all the way down which should work for all the values in these 3 column.
And also if A=B then I want to make that unwanted value cell="".
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View Relatedlet's say cell A1 is colored blue manually, how can i format cell b1 to be colored red? is it possible in conditional formatting?
View 7 Replies View RelatedMacro Based on an input cell’s (e.g. B12) setting of “yes” or “no”, format several other cells (e.g. B20:G20, B23:F23, C26:J26) as follows: keep the existing yellow shading if input cell is “yes”, change to grey shading if input cell is “no”. I would like this macro to run automatically whenever the input cell value is changed.
View 2 Replies View RelatedY3:Y500 contains a range of years, 2014/2015 through to 2018/2019, for a total of 5 different values (So conditional formatting is out the window). I'd like code which highlights the rest of the row, Z:FN, in a certain colour depending on the value in Y3:Y500.
Also, where there is data in the cells between Z:FN I'd like that to highlight in yet another contrasting colour.
Can I conditions format a cell based on data from another cell?
View 8 Replies View Relatedway to conditionaly colour code all cells in a grid based on cells in other grid: i.e.
gridA
1 1 2
1 2 1
2 2 1
grid B
12 11 14
34 16 53
35 64 23
i want all cell in grid B to be red if the coresponding cell of GridA is 2.
so here "14" "16" "35" and "64" will be red!
I am stuck on this one. In the attachment I have values pulling into N3:N7 based on a drop down choice. Some of the numbers are numeric (no decimals), others are currency (no decimals), others are percentages (2 decimals), etc.
Is there a way to pull values I'm currently pulling into column N and have those values match the format of the source? I've tried converting it into TEXT but then I cannot place conditional formatting data bars on the values and have it work.
If F2 is blank and E2 date is older than or equal to today, bold and color E2 RED.
View 2 Replies View RelatedI don't even know if this is possible but can you use some formula within Excel to return a value to a cell based on the cell formatting of another cell? Here is specifically what I am trying to do:
Cell A2 has a value of 10. If the font color of that cell is black (or "automatic") I want a formula in cell A1 that will return a value of "+10". If the font color of cell A2 is red, I want the formula in cell A1 to return a value of "-10".
With the click of a toolbar button, I've got my vba inserting a new tab, renaming it, inserting headers and now working on the code to insert all the formulas needed in 12 columns to copy down as far as there is data.
The 4th column D is the hardest. Currently, I'm using manual "Conditional Formatting" to colorize the cells in Col D but need the VBA to place that "Conditional Formatting" code into the sheet so that when the sheet is created, it will hold the conditional formatting feature.
Specifically, the formulas I'm using in the Conditional format wizard are:
Formula: =$B2$D2 then turn the cell red Applies to: =$D$2:D
Copy down (in other words, the colorizing should work all the way down Column D as long as there is data in Col D.
I want to format the cells in column B under the context of the cells in the corresponding row of column A. For example I want to color the cells in column B that the context of the corresponding row of column A is 1:
1
put
2
hot
4
dog
1
cat
1
yes
How to write a VBA that will, if the value of a cell in column "U" is TRUE, that row's FONT (for the row the TRUE cell is in) will turn red.
View 4 Replies View RelatedIs there a macro that can copy the information of any italicize item in Sheet1 to Sheet2 and automatically italicize the item in Sheet3 if the same item exist?
In my attached example:
In Sheet1, B3 to B8 contain information about a restaurant.
I want the macro to copy any restaurant (and its information) that is italicize to Sheet2. And in Sheet3, any restaurant that is in italic in Sheet2 will become italicize in Sheet3 if the name is match. Is there such a macro that can do these things?
I'm afraid as its a multiple conditional format and thus needs coding. At the moment I'm using the following
Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions
Dim rng As Range
' Target is a range::therefore,it can be more than one cell
' For example,,someone could delete the contents of a range,
' or someone could enter an array..
Set rng = Intersect(Target, Range("E27:E34,G27:G34,I27:I34,K27:K34,M27:M34,O27:O34,Q27:Q34,S27:S34,U27:U34,W27:W34,Y27:Y34,AA27:AA34"))
If rng Is Nothing Then
Exit Sub
Else.....................
This works very nicely, so that for example if I type the number 10 into cell M33, that cells fill colour becomes black (and the text turns white). Alas I would now also like to extend the fill and text colour to the cell one to the left too. To take this example I would type 10 into cell M33 and cells L33 and M33 would both be filled black and their text would be white. I'm not sure if this requires a change to the code, or if its possible to just have a formula or something which copies the fomatting of one cell into another