I copied my data and used the paste value function, pasted it onto another excel sheet and then saved as CSV. Ideally, there should be no formatting on the cells. However, column J threw some commas for which i am unable to understand.
All i want to do is put a control in place via VBA to remove all commas from the sheet.
Is there a VBA code that can perform this function?
For example, i have some data :
123,123567
12,778
9822,1
8267,222223
then, i want to permanently remove the comma, so the result :
123
12
9822
8267
Because if i use format cells -> use 1k separator, the data actually still contain the comma (even if the looks is 123, but in the formula bar, it stated 123,123567).
If someone enters "1,000" in a TextBox, Isnumeric(TextBoxEntry) says True
If I convert it to a value with something like x = TextBoxEntry * 0, the 1,000 becomes 1
I would prefer it to be 1000. Just removing commas would do the trick. How to do it.
i have data exported as CSV from in house system, the problem is that data is separted by commas therefore some of cells have split, i need VBA to remove the commas and bring my data back into correct format. Below is a sample of what the data looks like, real data is 5000 rows of data
PFOLIO A/C CODE ACCT NAME CUR CODE DESCRIPTN NARRATIVE DATE ENTRY DATE CASH VALUE De --------------------------------------------------------------------------------------------------------------------------------------------ACA001AUDCUST JP MorganAUDINT0005 SALE 39727.08 INTECH BAL GR FD C29-Dec-082-Jan-09-27690.57N
i need a macro to do the following,
1. Remove all commas from activeworksheet ( i notice i cant see the commas in excel, but when i open notepad i have commas in empty rows)
2. Remove all characters such as = + # ( ) $ from Column 5
Removing Trailing Commas
I have a list (general ledger) GL codes with trailing commas
Example:
123456789,123456722,123789456,,,,,
When I try to use “replace” and replace the multiple commas with nothing it turns my gl codes into a scientific number (1.23456789123456E+26), but my cell is formatted to text.
The other problem is for numbers with a single trailing comma, it would also remove the commas between the GL codes
Is there a function that removes trailing commas, or commas that are not followed by numbers?
is there a way to automate =left(b1,40) and remove commas from the text?
text in the cell would be something like a name for instance john doe, LLC but some names are to long so was using the =left to reduce it to 40 characters and using find/replace for the commas replacing it with a space.
I have a column of contacts. Each contact has data spread out over many rows, most of which are blank. I would like all of the data spread out through the rows to be in one cell, delineated by commas (so I can import into another program).
Concatenating the cells works except that I end up with 20 commas for two strings of info.
Just so you understand I may have this:
Mary red blue yellow purple
Rob blue purple
Trey yellow
and I want it to look like this
Mary red, blue, yellow, purple
Rob blue, purple
Trey yellow
How should I go about this?
We have a spreadsheet of our customer's info, to send to our collection agency; when we export it puts parenthesis around the area code and adds a hyphen in the number.
Also it puts commas in the figures. And I need the slashes gone from the date - is there a simple way to do this?
I tried formatting but it doesn't take out the () or ,
i have a Macro, its creating unwanted inverted commas at the start and end of the File.
File:
"SunilManual|123456790|DrivingLicence|908567543|Sunil|Manchan
|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w
|w|w|w|w|w|w|w|w|w|w|w|ww|w|w|w|w|w|w|w|w|w|w
|w|w|w|w|w|w|w|w|w|w|55|55||4|SR-1161||1234567890"
Expected File:
|SunilManual|123456790|DrivingLicence|908567543|Sunil|Manchan
|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w
|w|w|w|w|w|w|w|w|w|w|w|ww|w|w|w|w|w|w|w|w|w|w
|w|w|w|w|w|w|w|w|w|w|55|55||4|SR-1161||1234567890|
VBA:
Option Explicit
Sub txtt_export()
Dim buf As String, col As Long, r As Long, ws As Worksheet
[Code]....
I have a large spreadsheet, within which i am trying to remove commas from all cells. I get the error 'formula is too long' when I carry out the search. Some of the cells are >1024 characters in length and contain dates, text etc.
View 5 Replies View RelatedI have a list of 1735 numbers, actually they are numbers and/or alpha-numeric combinations. I need to copy this list of numbers into a report program. The report program requires six digits separated by a semi-colon (no spaces) with leading zeroes, as necessary.
To accomplish this, I format the cells under "Custom" and put in six zeroes. Now, I need to list them with no spaces between the numbers, just a semi colon. I have tried copying as "text only" into Word, and I get the full number, with the leading zeroes but I cannot figure out how to add the semi colons, no spaces, between each number. Can this be done in Excel? Every variation I try, including copy & paste values only, add the semi-colon into the next column and do =B2&C2, the leading zeroes drop off. If it can't be done in Excel, can it be done in Word?
I have a rather large file that I need to convert. Right now, there are about 3 columns and over 4500 rows. What I need to do is have everything separated by quotes and commas. I have a macro to somewhat do this, but it is putting an extra comma in front of everything. My question is this:
Is there a way to take out a comma that is in front of every entry?
OR
Is there another macro that will separate the columns with a single quote and comma, like below:
"1234","Smith","John","A."
I have the data like this :
03/07/2009;31267400;78168 in Cell A5
And here i want change that data like this :
Cell A6 = 03/07/2009
Cell B6 = 31267400
Cell C6 = 78168
I've imported a large document to excel. It contains 118 rows of information. My problem is that all the information is in column A. Every cell contains long sentences with information. The information is divided by a comma-sign (,). What i want to do is to seperate the information by columns instead of a commasign. So for example:
...A....................................................B....C.....D
1 Div,Date,HomeTeam,AwayTeam,FTHG
Becomes:
......A....B ........C.............D..........E
1 Div Date HomeTeam AwayTeam FTHG
Is there any smart way to do this??
I cant seem to figure out how to use "Split". I searched in this forum and found a few posts but I did not understand the solved ones.
I have data in many rows in this format:
$$ #901,11d3,[-B-] Ř.2494 +.0005/-.0000
The first thing to do is get rid of "$$ ", no biggie.
Second is to split the data up based on the "," comma location. The above data would read
#901
11d3
[-B-] Ř.2494 +.0005/-.0000
Each being in its own cell by "columns", thus the above break down would be in A2, A3 and A4 respectively assuming the original data is in A1.
Some strings of data can be over a hundred characters in length with multiple commas.
How would I concatenate a large range of cells, most of which are blank, and add a comma between each cell's value? My range is E2:Y2 (I will be filling down), but most of the cells are blank. For example, if I F2=9, I2=11 and X=25, I would like to display them as: 9,11,25. If in the next row, G=10, K=15 and Y=27, they should look like this: 10,15,27.
View 3 Replies View RelatedIs there a way to save as an excel file containing a list of words inone column so when I open it in Notepad I get the words in one line separated by commas?
View 6 Replies View Relatedcreate a macro that will create csv files for each worksheet of a workbook. The Macro works great. But i do have a requirement where i do not need extra commas (,) in the CSV. When the CSV are created for each worksheet, it adds additional commas in the end and my shell script throws it away becuase of the additional commas.
I have attached 3 files -
csvtest.xls - this has the macro which creates individual csv files for EACH worksheet in the workbook........
I have data in this formatItem
# Data
A
1, 2, 3, 4, 5
And I am trying to see if there is a way to separate the data column into separate colums anywhere that a comma is present.Need data to look like this.
Item #
Data
Data
Data
Data
Data
A
1
2
3
4
5
I have problem entering this array "jan";"feb";"mar" in the first 3 cells.
I tried to use commas but still nothing.
1. In a single column I have a list of random words e.g in column A, I have 1000 words going vertically down, in columns 1 down to a 1000. I would like to know how I can add a comma to the end of each word automatically?
2. In column A I have a list of 2,609 words going vertically down (the amount of words could be any random amount - even and odd numbers). In column A for the first 20 words I would like to automatically put the words "GROUP 001" in Column B next to the first 20 words in column A, thus the words "GROUP 001" would be repeated 20 times in column B.
For the next 20 words in line in Column A, I would like to put the words "GROUP 002" in Column B, thus the words "GROUP 002" would be repeated 20 times in column B. In this example there are 2,609 words so 2,609 divided by 20 = 130.45, so there would be GROUP 001 to GROUP 131 in column B.
I'm trying to separate text that have commas in between. I've got a column that contains commas and a few cells in those columns have commas and bracket. The problem occurs when there are more than two values WITHIN in the bracket that are separated by commas. How can parse the text in such a way where what ever is within the bracket remains in tact? For example: Controls, Motors, Transformers (LVoltage, High Performance, Medium Voltage). The goal is to separate everything before a comma but for Transformers I would like it to remain as 'Transformers (LVoltage, High Performance, Medium Voltage)'.
I am currently trying to count data in one cell separated by commas. The spreadsheet attached will make things look a lot clearer.
The "CURRENT" table is what I currently have and the "IDEAL" table is what I would like (but not hard-coded). Sheet 3 is where the meaningful data is. So for example, E4 has "CC-12" which is "Open" and "CC-11" which is "Closed". Therefore I would want there to be a "1" in cell F4 and G4 and a "0" in H4.
Formula to put in F4:H5?
I m using SUBSTITUTE function to replace commas with fullstop so I can multiply the end result with a number. But when I try to multiple for example B2 (0.1831) with 5, i get the VALUE! error.
Value Real Value (after substitute function)
0,1831 0.1831
23,3333 23.3333
12,5199 12.5199
5,5000 5.5000
20,5999 20.5999
24,4671 24.4671
200,0000200.0000
2,5386 2.5386
0,4000 0.4000
1,5019 1.5019
how I can resolve this so I can use the real values for computations (eg Real value *5), without having the VALUE! error message.
How do I add a comma to a list of names all in one column? The full name is in one cell.
View 3 Replies View RelatedI have a number $2,173,980.08 in my excel worksheet. I try to find it using Ctrl + F $2,173,980.08 and excel couldn't find the number. What setting do I need to change in order for excel to find number with dollars sign and commas in it?
View 8 Replies View RelatedI am looking for VBA code to remove extra commas from d column.
Missing
, , , 1617614,
, , , 1676652,
, , , , 1676664, 1676665, 1676666, , 1676668, , 1676670
, , 1591813,,,,
, , , 1591113,
Ok my data is like this:
data, data1, data2, "data99, data98, data97" ,data4, data 5 data, "data1a, data1b", data1, data2, data3 data, data, data, data,
and I use the following code to extract.
Code:
Open "D:data.csv" For Input As #1
do until eof(1)
Line Input #1, strData
myArray1 = Split(strData, ",")
For iCounter1 = LBound(myArray1) To UBound(myArray1)
Next iCounter1
Loop
Close
My problem is that it does not group the ones within the quotes, just splits them.
Two questions
1. Can my current code be modified?
2. I can use Input instead, to go one by one, and it recognises the quotes, but how can i tell I've moved to the next row of data?
I have some data in cell A1, example would be "ABC,CDE,"
I was wondering if I can input a formula in B1 where it returns the text after the first comma, including the comma.
A1 would be ABC,
B1 would be CDE,
I'd like to keep the commas, and I also need to make this into an Excel formula if possible, rather than using Text to Columns
