Remove Macro When Assigned To Object?
Jan 6, 2005I accidently assigned a macro to an object. When right-clicking on the object, I am only able to "Assign Macro...", how do I remove it?
View 6 RepliesI accidently assigned a macro to an object. When right-clicking on the object, I am only able to "Assign Macro...", how do I remove it?
View 6 RepliesI was just trying to work around a problem with multiple UserForms in project. I have assigned Object variables oUserForm1 and oUserForm2 to represent UserForms of specific names.
VB:
Dim oUserForm1 As Object
Dim oUserForm2 As Object
Set oUserForm1 = VBA.UserForms.Add("Data" & CStr(X))
oUserForm1.Y = Y
[Code] .....
When oUserForm1 shows new data are inserted and another macro runs with a line to hide the opened UserForm.
In my project manager this user form name is i.e. Data1 (for x = 1), but the syntax Data1.Hide returns error. After that line it ask me to close the TOP most modal UserForm.
But When I use Me.Hide all works well.
My question is: Does VBA not see the name of the userform ("Data1") because I have used the oUserForm1 variable to give it a focus to it?
I have a little trouble with my macros. I wrote several different macros, each for a special purpose. Then I created some Buttons, which would make it easy for others to work with them.
But I have now experienced several times, that my buttons don't keep their assigned macro.
I have a formatting macro that I recorded, nothing fancy just bringing in a few different spreasheets, and formatting them. I made this for someone who really doesn't know excel.
I linked this button to the macro and it works great, except at the bottom of the code I would like to put something that when this has run, it hides the button, so it can't be run again.
I have a shared workbook. Just used as a checklist for daily tasks. But opened on 5 pc's for users to edit. Is there a way to assign the process of click Review > Track Changes > Accept/Reject Changes... to a marco button?
View 1 Replies View RelatedI created an object using multiple smaller objects (shapes, text etc,) and grouped them to make an icon. I assigned a macro to the finished object. It works fine when the sheet is unprotected. However, when the sheet is protected, the macro will run only when certain parts of the object are clicked. The standard cursor turns into the "hand" when any part of the object is touched regardless of the protection status.
View 8 Replies View RelatedSo I have a sheet with a lot of formulas and form control buttons that have been assigned macros.
When I go to protect certain cells and lock them and the activate sheet protection, suddenly my form control buttons with the assigned macros don't work.
I still need to protect some cells with formulas and don't want to leave the whole worksheet unprotected, but in order to allow the form control button macros to run, it appears that's what I have to do....or, is there another way to do this?
I've created a custom toolbar and populated it with a custom button. I have created a macro and it resides in ThisWorkbook. The macro is assigned to the custom button and the toolbar attached to the workbook. So far, so good. If I copy the workbook and rename it, when I click the button to run the macro it launches the original workbook and runs the macro. The macro effects changes on the renamed workbook copy. The macro name found in the assign macro dialogue starts with the original workbook name. The same effect if the macro resides in a module or sheet. Any known way to have the macro name change along with the renaming of the workbook such taht it refers to the currently opened workbook macros? Regards.
View 5 Replies View RelatedI'd like to write a macro to create buttons with the caption "Fix" in over 300 cells. Furthermore, I would like each button, when pressed to run a macro that would copy and paste the values (paste special) of the entire row in which the button is situated as well as copy and "paste special" the values in the fixed cells $J$2, $K$2,$L$2, and $M$2. I've attached a file to clarify what I'm sure is an extremely convaluted statement of my problem.
View 5 Replies View RelatedI'm trying to remove lines in my line charts. I searched the internet and find the following code:
Code:
Sub RemoveLines()
Dim ser As Series
For Each ser In ActiveChart.SeriesCollection
ser.Format.Line.Visible = False
Next ser
End Sub
However, when I run the code, I got "Object doesn't support this property or method". I did select the chart. I have excel 2003 with vba 6.5.
i created a spreadsheet which, using vba, disallows sheet deletion (works a dream); problem since has been that i cannot delete any sheets in any workbook anymore, and even a completely empty unsaved spreadsheet will try to open the worksheet containing the original code...
i've tried the following:
- deleted the workbook excel is trying to reference
- ensured there are no macros in excel
- ensured there is no vba code whatsoever
- checked the defined names (nothing)
- checked the vba objects
- debugged the "delete sheet" (didn't work)
- uninstalled all of office 2003, then cleaned registry, then reinstalled from scratch
- all of the above again
- searched about a zillion internet postings
My code as below
Application.Goto Reference:="CURRENT"
Selection.Copy
C1 = Range(Cells(4, 8), Cells(4, 200)).Find("HC4").Value.Row + 1
C1.Activate
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
I want to copy the range 'Current' , this part, the easy part works.
Next I want to look in the range of H4 to GR4 for the value that also appears in HC4
In my example this would be CW4 then I want to paste 'Current' to the cell 1 row below, ie CW5
Convert object values to cell values!-requirement
i need to convert the values present in the drawing objects like "Rectangle" to cell value.
Eg:
A rectangle say "Rectangle 150" is having a value as "Customer name". Now i need to get this value in normal cell in the worksheet.
I'm getting the following error:
"Object library invalid or contains references to object definitions that could not be found"
I wasn't getting that error last night and I'm not sure what I may have done to cause this error.
It seems to be cause by code running on one sheet of my workbook, but I'm not really sure about that. I'm still a bit of a novice at VBA.
I'm using Excel 2002 SP3 and I'm running MS XP Home as my OS.
Do you have any ideas what can cause this error and/or how to trace down the offending objects/code?
I am trying to run the following macro to copy a data range(A1:HX1) range from one sheet(sheet 6) and past it into the next available blank row in another sheet called New_Overall_Input_File but get the following error when I try and run it......."Object Required"?
Sub ALLCARS()
Sheet6.Range("A1:HX1").Copy
New_Overall_Input_File.Range("D" & Rows.Count).Offset(1, 0).PasteSpecial xlPasteValues
Application.CutCopyMode = False
End Sub
I am trying to add a simple function to button in Excel.
First I need to select cell G24 as that where the inserted file should be placed on the worksheet. Then on the Add Object window to open but the tab 'Create from file selected.
Below is only part of the solution
Sub ShowInsertObj()
Application.Dialogs(xlDialogInsertObject).Show
End Sub
Also is it possible to detect that file has been placed on the page ? In cell G24?
I am wanting users to attach a required zip file. I then need to check if they have done so.
I added this code to a userform initialize & now I get a message ' can't find object or library '. Which library do I have to activate in Tools, References.
Dim x As Integer
ComboBox1.AddItem "0"
For x = 1 To 20 Step 1
ComboBox1.AddItem Format(x, "0")
Next x
ComboBox1.Value = Sheet2.Range("E1").Value
ComboBox2.AddItem "0"
For x = 2 To 90 Step 2
ComboBox2.AddItem Format(x, "0")
Next x
ComboBox2.Value = Sheet2.Range("E2").Value
The word Format is highlited in userform initilize.
I need to identify the object that is triggering the current running macro. For example, i have 4 buttons say button 1 to 4 that all do almost the same thing. I have written 4 different macro for all 4 buttons but i want to simplify my code so that i can have a better leaner code by only using 1 macro for all 4 buttons. simply put is there a way to say identify which button/shape i pressed:
If "identity of button pressed" = "Button1" Then
execute some code
Else
End If
When I Copy My Excel Document I Find This:
In My New Document The Custom Toolbar Is Likning The Functions (macros) To My Old Workbook In My Other ( The One I Copied From) Document.
Can I Make The File Path Of The Macros Change With The File Path Of The Document.
Or Embed The Macros To The Sheet
I created a name with the code
ActiveWorkbook.Names.Add "ChartNo", 0, True
I got an "error 428 object required"
with the next line :
[ChartNo] = 1
My doubt it's at the final of the code when the condition If IE.Document.URL Like constantsValues.urlLoginData Then is true, it enter into a class an introduce the user and password from a login page AND then the page is REDIRECTED to another page SO when it goes out the IF CONDITION, the values that I had at the beginning in the IE Object are now DIFERENT because I'm now in a new page.
So that's why I put Application.Wait for 30 seconds, and then try to refresh the values of the IE object and get the new ones, but it always get the first values (the values of the login page :S) NO the new ones :S
How can I update the IE object to get the values of the actual page?
Code:
Private Sub runMacro_Click()
Dim constantsValues As CConstants
Set constantsValues = New CConstants
[Code].....
Lets say I have 20 cells. I want to randomly assign a label to the each cell from 5 choices, like "Blue", "Orange", "White", "Green", and "Black". But I want to assign a probability of selecting the labels. So the percent probability of choosing Blue would be 56% and White would be 23%, etc. . . is there a function that allows me to do this?
View 5 Replies View RelatedWhat I'm trying to do is use a variable NumberOfRows (which is defined as an integer) in this following code, but the problem I get is that the NumberOfRows isn't being inserted.
Let's assume that NumberOfRows = 15.
What I would expect to be in cell B1 is =sum(H5:H15), but what is getting placed there is =sum(H5:HNumberOfRows) which of course doesn't give me anything. I'm sure this is an easy syntax thing, but I just can't seem to get the right combination.
Range("B1").Formula = "=Sum(H5:H&NumberOfRows)"
I am using Excel 2007.
I have a spreadsheet with about 30 items in 30 rows. I have a picture object which corresponds to the item # and other info in each row. When I sort the rows, the picture objects don't get sorted with the rows and end up no longer corresponding with the item # and other info.
I have right clicked and set the properties for each picture object to "move and size with cells". This does not prevent the problem.
Am getting 1004- object or application undefined error in macro excel.
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-4],[Book1]Sheet1!R1:R65536,4,FALSE)"
I am making a system that warns me when the Monthly, Bimonthly, and Quarterly appointments are due based on calculating the "Last Serviced" date. The problem is that when I sort the data (usually by company name or by service type) it scrambles up the color coding and places the assigned conditional formatting rules in the wrong places. How can I keep the conditional formatting attached to their respective companies and row (and still be able to sort without scrambling).
I attached the file : Backup Database PUBLIC HELP FILE.xlsx
I have a list of product numbers and product prices (table 1).
I have a list of those (old) product numbers becoming new ones (table 2).
BUT some of those products have been merged together so multiple old product numbers have become one new one.
Now I have a list of the new product numbers and I want to calculate the price of the new product by adding up the price of the old products.
I am trying to average a range of data in column B, the values range from 0 up to 100. I want to average the data in column b for the lowest 5 people with a value higher than 0. I have searched the archives and the formulas i have tried give me a "False".
this is the formula I was using=IF(COUNTIF(B3:B22,"
I am trying to filter a list where the number of occurences of unique cost codes for each emp No is more than 1. What is needed is the emp no's who have only one costcode to have '0' in the 'no of codes' column. If more costcodes per empno, I need the first costcode to have 1, second code 2, etc in 'no of codes' column. The idea is at the end to be able to filter and delete all those with '0' in, as I only need to work with emp no's that have more than 1 'cost code'. See attached file. The records are in col A, the costcodes assigned to them in B, the formula in C, at the moment is:
=IF(AND( COUNTIF($A$1:A2,A2)>1, COUNTIF(B1:B2,B2)>1),C1, IF(AND(COUNTIF($A$1:A2,A2)>1, COUNTIF(B1:B2,B2)<2),(C1+1),1))
I have a configurator that looks up parts in a table based on several search criteria. The results are listed in individual rows with the number of matches varying per lookup combination.
Is it possible to dynamically add a button or similar to each row that would copy the lookup results of that row to a separate quote form?
how can I predefine the function of the button?