I'm trying to remove lines in my line charts. I searched the internet and find the following code:
Code:
Sub RemoveLines()
Dim ser As Series
For Each ser In ActiveChart.SeriesCollection
ser.Format.Line.Visible = False
Next ser
End Sub
However, when I run the code, I got "Object doesn't support this property or method". I did select the chart. I have excel 2003 with vba 6.5.
When I run my code (which opens Excel from Access) it does everything it is supposed to but I then get the above error but I do not get the error if I open the VBA window and then run the code. (The code is password protected, not sure if this is relevenat though).
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate()
If Range("B1").Value = Range("N1").Value Then End
Sheets("Data3").Select
Cells(13, 6).Copy
Sheets("Data Lookup").Select
Cells(23, 11).Paste
End Sub
I am using Excel 2003. I get the above error and when I press debug, the issue highlighted is the following:
Code:
graff:
adde.TextBox6.Text = "ok"
shet = ActiveSheet.Name
Set CurrentChart = ActiveSheet.ChartObjects.Add(5, 20, 350, 200)
[Code].....
I'm getting a really weird error in that I can't reproduce it. It sometimes occurs when I open the document and sometimes not. HEre is the
Private Sub Workbook_Open()
Dim dic, Dn As Range, rng As Range
Set rng = Sheets("Moisture").Range("B2:B1000")
Set dic = CreateObject("Scripting.Dictionary")
With dic
For Each Dn In rng
If Not .exists(Dn.Value) Then
.Add Dn.Value, ""
End If
Next Dn
Set wksPayment = Sheet10
wksPayment.ListBox2.List = .keys
End With
End Sub
The line that hangs up is the wksPayment.Listbox2.List = .keys line. Any ideas or ways to test or further figure out what is causing the problem?
Not sure if I am having a brain fade or not but the following code gives an ‘Object doesn’t support this action’ error (at the ‘with..’ line) and I can’t figure out why.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "D:"
.FileType = "*.*"
MsgBox (.FoundFiles.Count)
End With
End Sub
Following code from net and applied.
But runtime error on the highlighted line: "object doesn't support this property or method
Code:
Private Sub cbAddImage_Click() With Application.FileDialog(msoFileDialogFilePicker)
.AllowMultiSelect = False
.ButtonName = "Submit"
.Title = "Select an image file"
.Filters.Add "Image", "*.gif; *.jpg; *.jpeg", 1
[Code] .......
I was using the following macro on Excel 2000, 2002 & 2003 for many years without a fuss. Recently, I upgraded to Excel 2007. When I run the macro now, I get the following error message:- Run-time error 445 Object doesn't support this action.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Documents and SettingsDesktopCommercial Database"
.SearchSubFolders = True
.Filename = "*.*"
.TextOrProperty = "BANK"
.MatchAllWordForms = True
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
MsgBox "There were " & .FoundFiles.Count & _
" file(s) found."
End If
End With
End Sub
Additional info:- The 1st line of my code which is With Application.FileSearch is highlighted in yellow when I run this macro.
I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
View 5 Replies View RelatedI am trying to use the Cells Property in VBA but it is not working and I cannot figure out why for the life of me. Below is my ....
View 9 Replies View RelatedWhile clicking a button in the excel, am getting a run-time error. Everybody's need is urgent even I understand boss. Anybody else who is in the same shoes as mine. Here goes the solution:
View 5 Replies View RelatedI have a userform listbox2 that i am trying to save info from to a worksheet.
I am getting the error "Object doesn't support this poperty or method" when I am trying to set the cell of a find ......
When I execute this, I got error run-time error 445, object does not support this action. I am using window vista, microsoft office 2007. How can i change the code to make it workable?
View 2 Replies View RelatedI have a number of similar templates on a server used to produce quotations from other files with lookup formulas. They all have 2 modules, 3 & 4. Module 3 deletes certain data and shows values instead of formulas for most of the pricing etc. Module 4 contains a macro that logs info in another central workbook on the server.
If 2 files are opened based on the same template at once, when the Quote_Wrapup macro (in module3) is run on one of the open files(code follows) from a button on the spreadsheet it often produces a Run-time error '9' Subscript out of range error.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("D8:E9").ClearContents
Range("D8:F9").Interior.ColorIndex = xlNone
Range("qdata5").Font.ColorIndex = 2
Range("qdata6").Font.ColorIndex = 2
Range("A18:A1018").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value
Range("A980") = Range("A980").Value...................
I have created quite a nice little macro that;
drills through a lot of key figures, updates a pivot chart and copies the chart to powerpoint.
However it crashes on one particular data set every time with this error:
Run-time error '1004':
Unable to set the _Default property of the pivot item class
The code where the debugger stops is the last line below here.
lngKpi = Sheets("Helpfile"). Cells(lngRow, 2)
Sheets("Charts").Select
ActiveSheet.ChartObjects("DK").Activate
ActiveChart.PivotLayout.PivotTable.PivotFields("KPI # (overall").CurrentPage = lngKpi
I can manually change the pivot chart to the keyfigure it crashes on and thereby workaround the problem in the macro. Also it works for more than 50 other keyfigures without problems.
1) i have office 2003 on a laptop. within powerpoint, i can create a 'microsoft excel chart 11' object. to create a link to the excel data source, do i have to go through the odbc sql setup? it works, but i don't want my powerpoint to be dependent on some excel file somewhere. what are the other options to insert/make a functional pivot chart in powerpoint with the data also within powerpoint? the data as sheet option does not result in the chart being a pivot, it's just a plain chart. it has to be a proper object, not an image paste or a chart that updates links with the excel file open.
2) i have office 2007 on my other laptop. i can not find any suitable object to choose from to make a pivot chart in powerpoint. what's the best way to go about in 2007 version?
3) am i going about this the wrong way with the objects? should i be after vba code?
I have a form with several combo boxes, and they function just the way I like as far as being able to pick from the list, or typing in them and having it show you the next available item in the list as you add letters. Whats happening that I would like to know how to deal with is... as soon as you type a letter that is not in my lookup range it generates an error. "Could not get the list property - Invalid property array index". I don't want people to be able to add to the list, but I would like a msgbox to pop up. Then allow them to go back to the box and try again.
View 2 Replies View RelatedOK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code:
If DateBox vbNullString And DateValue(DateBox) > checkdate Then
M1 = "NEOPRENE" & Chr(13)
Else
M1 = "" & Chr(13)
End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
Having problems with trying to get my vba code to access the SpecialCells property. Receiving the following error.... Unable to get the SpecialCells property of the Range class. The section of my code is below that is causing the error. Keeps stopping on the "Selection.SpecialCells(xlsCellTypeVisible).Select" line.
Sheets(" Book Query").Range("A6:I6").Select
Sheets("Book Query").Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlsCellTypeVisible).Select
Selection.Copy
Sheets("Inventories and Variances").Select
Sheets("Inventories and Variances").Range("A7").Select
I'm looking for the excel model object chart and class diagram. I find the model object's description in the microsoft page, however i'm liked to have the object model and the class diagram in chart or picture.
View 5 Replies View RelatedI have wirtten a sub routine that builds a userForm dynamically based on user specific data. The form builds just fine and 9 times out of 10 the code at the end of the sub routine removes the form from the workbook. Since it's built on the fly I don't bother renaming the form. The times when it does not remove itself and the user restarts the program, part of the code written to the forms module references "UserForm1". and the the code halts. I know there is a way I can verify that UserForm1 has been removed and if not remove it before executing the next sub routine, I'm just tired and can't remember anything. Note that the UserForm1 contains CommandButtons that direct the user to Static UserForms that do not get removed, and those can trigger the sub routine to rebuild the dynamic UserForm.
View 3 Replies View Relatedi really dont know how to do it. remove these lines in excel sheet???
View 2 Replies View RelatedI have enclosed 3 pictures with my question.
1. Is where the user is putting in data.
2. Is a spreadsheet with the data choosen from the action of the user, but it is containing also the non-choosen data from the input spreadsheet.
3. IS how I want the data shown to me either automatic or thru a macro. So is there any code like IF or some Macro who would make this happen?
What I want at the end of the day is a list of products that the user have put in and nothing else, with the QTY and price and the sum of that.
Here is a picture example of what I mean, just randomly found on google:
http://www.projectwoman.com/uploaded...ent-763577.jpg
Maybe an insignificant thing I want, but can the line from the comment connecting to the red indicator be removed? Added an example since my comments show up below the selected cell with VBA code.
I've created VBA code in Access 2007 to create a column chart in Excel, and it is working. I need to change the rotation on my category labels to 270 degrees vertical. When I record a macro on the chart in Excel 2007. I only receive the following
Sub chartingRotation()
'
' chartingRotation Macro
'
'
ActiveSheet.ChartObjects("Chart 1").Activate
ActiveChart.Axes(xlCategory).Select
ActiveSheet.ChartObjects("Chart 1").Activate
End Sub
How can I get the macro recorder to record changes to chart properties?
In Sheet1 cell A1 has concatenate formula and the data source is linked from sheet "DataInput". Sheet1 cell A1 has multiple data and there are blank lines within the cell. I would like to remove these lines so it looks clean without any gaps. So basically its looking like this right now
Harry
Andrew
Joe
Apple
Billy
I want it to look like this but i am having a difficult time because this cell contains a formula
Harry
Andrew
Joe
Apple
Billy
A formula or something that would fix this problem automatically.
I have code that works well to insert a blank row. I need to remove all vertical lines each time it adds a row. You can see I commented out the line I tried.
Sub InsertRow()
Dim LstRw As Long, ChkRw As Long
LstRw = Cells(Rows.Count, "A").End(xlUp).Row
Application.ScreenUpdating = False
For ChkRw = LstRw To 6 Step -1
If Cells(ChkRw, "A") Cells(ChkRw - 1, "A") Then
Rows(ChkRw).EntireRow.Insert
'Selection.Borders(xlInsideVertical).LineStyle = xlNone
End If
Next ChkRw
Application.ScreenUpdating = True
End Sub
I have created a form for my customers. It is attached.
In creating the form, I have merged cells so that the area behind my text boxes will appear clean (no lines).
However, I cannot remove the lines around certain cells see, e.g. range K21.
I would like to make the form as "pretty" as possible for my clients (and it would help me look good to management).
whether I can handle errors in a way that tells me which object caused the error?
For example if a userform has two combobox's and one causes an error, can I return to a message box containing the name of the object (combobox1 or combobox2)?
I have tried returning err.source but I am either not using it correctly or it isn't intended to be used this way.
I am having difficulty getting a form to work the way that I would like it to work. I have a form that is used to display questions that my students will be answering. The form also is used to put the answers into a worksheet. I have 2 sheets. Sheet2 has the questions, student answers, and correct answers. Sheet1 is used to indicate correct answers and to keep track of percentage correct. I am fairly new to VB. I have 2 pieces of code that I am going to post. The first one works and the second one doesn't.
This is in the "This Workbook" section and it works.
Option Explicit
Public intNoQ As Integer
Public strNoQ As String
Public NumberofQuestions As Integer
Dim StudentName As String
Dim InputBoxAnswer As String
Public Sub Workbook_Open()
Application.Visible = False 'Hide Excel
Load Questions
Load NumberCorrect
NumberofQuestions = Worksheets("Sheet1").Range("K3").Value
For intNoQ = 1 To NumberofQuestions
strNoQ = VBA.CStr(intNoQ)
If intNoQ = 1 Then
Questions.Controls("QuestionNumberBox").Value = "Question#" & strNoQ
Questions.Controls("QuestionBox").Value = Worksheets("Sheet2").Range("B1").Value
End If
Questions.Controls("CorrectBox" & strNoQ).Visible = True
Questions.Controls("CorrectLabel" & strNoQ).Visible = True
Next intNoQ...............