I have a formatting macro that I recorded, nothing fancy just bringing in a few different spreasheets, and formatting them. I made this for someone who really doesn't know excel.
I linked this button to the macro and it works great, except at the bottom of the code I would like to put something that when this has run, it hides the button, so it can't be run again.
I have a shared workbook. Just used as a checklist for daily tasks. But opened on 5 pc's for users to edit. Is there a way to assign the process of click Review > Track Changes > Accept/Reject Changes... to a marco button?
View 1 Replies View RelatedSo I have a sheet with a lot of formulas and form control buttons that have been assigned macros.
When I go to protect certain cells and lock them and the activate sheet protection, suddenly my form control buttons with the assigned macros don't work.
I still need to protect some cells with formulas and don't want to leave the whole worksheet unprotected, but in order to allow the form control button macros to run, it appears that's what I have to do....or, is there another way to do this?
I have a workbook that contains 18 sheets, on 14 of the work sheets I have a comand button that runs the following
Private Sub CommandButton1_Click()
' Range("B3:B53").Select
' Selection.ClearContents
Dim nloop As Long
Range("C3:K53").Select
Selection.Copy
Range("B3:J53").Select
ActiveSheet.Paste
For nloop = 3 To 53
If nloop 3 And nloop 12 And nloop 15 And nloop 16 And nloop 23 And nloop 28 And nloop 41 And nloop 47 Then Range("K" & nloop).Value = 0
Next nloop
Range("B2").Value = DateAdd("d", 7, Range("B2").Value)
Range("L7").Select
End Sub
I want to put a comand button on sheet18 that will run the code so it does the same thing as pressing each command button on each sheet.
the sheets that I have the cmd on are:
Sheet1, Sheet2, Sheets3, Sheet4, Sheet5, Sheet6, Sheet9, Sheet10, Sheet11, Sheet12, Sheet13, Sheet15, Sheet16, Sheet17
I have got a macro (from Mr Excel's MVP) that hide certain cells according to assigned cell value
What I need is:
to hide certain ranges in different worksheets according to the assigned cell value in the first worksheet
if sheets1.cell A1= "hi" then
range (" goooo") in sheet 1.hide
range ("deeeee")in sheet 2 .hide
range ("faaaaa") in sheet 3.hide
the macro I had is :
====================================
====================================
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$1" Then
If Target.Value = "hi" Then
Worksheets("Sheet1").Rows(2).Hidden = True
Else
Worksheets("Sheet1").Rows(2).Hidden = False
End If
End If
End Sub
I'm trying to find a way of hiding every sixth row on my sheet, however, no matter what i try I can't seem to get it to work.
I want to be able to click a macro button that will auto hide every sixth row. But I don't want to have to input every row reference in VB.
Need a macro for each button.
The sheet will be protected with a password (in the future, users will have varied access privileges).
Column A is designated as the "Button" Column.
There are 5 buttons here. Each representing the area on the sheet that needs to be viewed. Once the button is pressed, it takes you to that section of the sheet. At this time, I have designated each column area as:
a-z
aa-az
ba-bz
ca-cz
da-dz
I have tried this formula with opening tabs, but this won't work.
I'm trying to record a macro which will hide and unhide columns K:P of data, but I only want one button. I know how to do this to produce one button for hiding and another for unhiding...but I want one combined button.
How to use vba, how I do this via the macro recorder?
I found this code for a button, so I can collapse and expand a set number of rows within that sheet. It works exactly the way i want it to, however, now I have a second sheet in my workbook, and I used the same button. Problem here is that when I activate the button, it opens the same rows in EVERY sheet in the workbook. "For each ws in Worksheets" so my question is what is the term for it to only work on a certain worksheet?
Code:
Private Sub ToggleButton1_Change()Application.ScreenUpdating = False
Dim ws As Worksheet
With ToggleButton1
If ToggleButton1.Value = True Then
For Each ws In Worksheets
[Code] ........
Other questions is about the ability to send an MS Outlook email from inside of excel.
I've been trying to find something that does the following:
Click button, Form pops up, has drop downs to select recipient, has field for subject, has field for message body, sends email.
I have a little trouble with my macros. I wrote several different macros, each for a special purpose. Then I created some Buttons, which would make it easy for others to work with them.
But I have now experienced several times, that my buttons don't keep their assigned macro.
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedSub Button294_Click()
If Sheet1.Range("A34:A94") = "HIDE" Then
For Each cell In Range("A27:A94")
If UCase(cell.Value) = "HIDE" Then
cell.EntireRow.Hidden = True
End If
End Sub
I accidently assigned a macro to an object. When right-clicking on the object, I am only able to "Assign Macro...", how do I remove it?
View 6 Replies View RelatedI created an object using multiple smaller objects (shapes, text etc,) and grouped them to make an icon. I assigned a macro to the finished object. It works fine when the sheet is unprotected. However, when the sheet is protected, the macro will run only when certain parts of the object are clicked. The standard cursor turns into the "hand" when any part of the object is touched regardless of the protection status.
View 8 Replies View RelatedI've created a custom toolbar and populated it with a custom button. I have created a macro and it resides in ThisWorkbook. The macro is assigned to the custom button and the toolbar attached to the workbook. So far, so good. If I copy the workbook and rename it, when I click the button to run the macro it launches the original workbook and runs the macro. The macro effects changes on the renamed workbook copy. The macro name found in the assign macro dialogue starts with the original workbook name. The same effect if the macro resides in a module or sheet. Any known way to have the macro name change along with the renaming of the workbook such taht it refers to the currently opened workbook macros? Regards.
View 5 Replies View RelatedI'd like to write a macro to create buttons with the caption "Fix" in over 300 cells. Furthermore, I would like each button, when pressed to run a macro that would copy and paste the values (paste special) of the entire row in which the button is situated as well as copy and "paste special" the values in the fixed cells $J$2, $K$2,$L$2, and $M$2. I've attached a file to clarify what I'm sure is an extremely convaluted statement of my problem.
View 5 Replies View RelatedI want to unhide one row at a time but then also have an option to hide a row if it is not needed. I am using an ActiveX button to unhide one row at a time and that is working well, but what code would I need for (I assume) a second ActiveX button to hide one row at a time.
Unhiding is:
[Code] ........
Hiding is...?
what would be the vba code to hide a button according to the value of a cell?
View 9 Replies View RelatedIts there any way to hide a Filter button? I want to keep all of them on my sheet except for 1. Here's a screen shot:
View 6 Replies View RelatedI'm looking to make a simple button that would hide a given range of columns.
This is the simplest I could find:
VB:
Sub button1()
Columns("AD:AE").EntireColumn.Hidden = Not Columns("AD:AE").EntireColumn.Hidden
End Sub
Although this works nicely, there was another way to do it (looks more ergonomic and doesn't take up spreadsheet space). Here's a screenshot of what I mean: ColumnHide.gif
I want to hide & unhide columns using only (plus minus) button which is appearing on top of current sheet. I have couple of files with that options built in, but I dont know how to do it. I tried to see macros but appears that there is no macros at all in that file??
View 3 Replies View RelatedI'm trying to get a Button to hide and unhide rows depending on Column A only which is a pasted link to other sheets. The rows should hide when Cell A is empty or 0.
or 2 buttons one for hiding and the other for unhiding rows.
I have a workbook full of several tabs. The main tab is the 'Report' tab, all other tabs are hidden. The information on the hidden tabs populate onto the 'Report' tab.
My question is, I have created a shape on the 'Report' tab to act as a button. This "buttton" is which I have hyper-linked with one of the hidden tabs. When the hyper-linked tab is showing, the button works fine. However, when I hide the hyper-linked tab, the button does not work. I would prefer to have just the 'Report' tab showing.
Here is my code ( Recorded by macro )
Sub Tally_Chck()
'
' Tally_Chck Macro
'
'
Columns("D:E").Select
Range("E1").Activate
Selection.EntireColumn.Hidden = True
Range("B3").Select
End Sub
I want Hide And Undie Column With One Button...
-Once Click Hide
-Again Click Unhide
I need a little help here as I am trying something new, and am not sure how to proceed.
I am trying to change from 2 columns to 3 columns where there are a few variables. This is the original:
I have a command button that is within a cell that when selected it insert a picture, the problem I have is when picture is in selected cell (same as command button) I can still view the command button from behind. I set the picture to “view from front” and Command button to “view from rear” but it doesn’t solve anything. I also have the command button checked to not print
View 14 Replies View Relatedtrying to create a button to hide unsed rows, can anyone help? basically the sample below is what i want to do but it hides all the rows listed.. i want it to hide only unused rows in the rows selected if yes is selected and unhide them when no is selected...
wannahide = MsgBox("hide rows", vbYesNo)
If wannahide = vbYes Then
Rows("5:28").Hidden = True
Else
Rows("5:28").Hidden = False
End If
Is it possible to hide a command button if a cell value is 0, and unhide if the same cell value is 1.
View 9 Replies View RelatedI want to be able to have a set of buttons or a dropdown menu where i can put all the titles of my columns in.
After clicking on one of the titles the column must hide or show itself, is there a way to do this?
It's for an automated sheet wich contains a lot of information and this will be used by a lot of people, i want to make it easy for people to simply generate a sheet with just the info they need.
Using Excel 2007, I figured out how to insert a Toggle Button and program it to hide or unhide my columns F and G (which show cost data for products we sell) depending on the state of the button.
What I'd like to add to the button is text and functionality as follows:
- Columns F and G are shown, Toggle button IS NOT depressed and the button says "Hide Cost"
- Columns F and G are hidden, Toggle Button IS depressed and the button says "Show Cost"
I figured out how to change the text on the button, but can't figure out how to change it based on the button state. I know there has to be a way to do this.