Remove "space" & Add 3 Zero's
Replacing a sequence of characters such as NUK 00100 with NUK00100000
Essentially, the code will just need to remove the space & to suffix those 3 zeros onto the end of the sequence.
View Complete Thread with Replies
Related Forum Messages:
How To Remove Space From A Cell
some vale in the column where i do a vlookup to get data
but i have some problem the vlaue in the cells contains space at the end and i am not able to remove i tried TRIM and also text to column but it does not work
Remove Initial Space From Column Of Entries
After copying certain data into an excel worksheet, all entries in a column begin at 2nd space of each cell which I don't want.
I can manually backspace each entry to the first space of each cell. But I cannot backspace all entries at once even if I try Find then put in a space for find and then in replace leave blank.
Remove Space And Symbols In Front Of Words
I have a spreadsheet that I exported from my accounting software. For some reason there are 4 columns that all begin with an apostrophe and have various lengths of white space before the wording begins.
What kind of formula can I use to get rid of the apostrophe and have the wording be left aligned within the cell with no space before or after it?
The file I am working on is attached. They are columns C, D, E and F.
Remove Front Zeros & Add Space Before Last 2 Characters
I want to remove the front zero(s) from the front and put a space before the last two letters for the following column of data in Excel:
Final result will have this format and the data are right aligned.
The numbers can vary (e.g. 0150MG, 0025MG,etc.) but the arrangement is always the same: four figures for the first 4 characters and two letters for the last two characters.
The format of the cells containing the data is: “General”
My table has 7 columns and these data are in the 5th column in a worksheet called “ProductSummary”. The number of rows for the records can vary from 10 to over a couple of hundred.
How can I use VBA to: 1) automatically select the table range in that worksheet and reformat all the data in the 5th column.
Remove The Extra White Space Between Each Comma Delimited Digit
This is a delima I cannot figure out. I had to create passwords for a website we are building. I have 3000 employee numbers has to be used. So what i did was took the first initial and middle initial and last initial and first 5 of the ID number. I did a comma delimiter to obtain all of the letters and numbers. example: ABC12345
My problem is none of the passwords work because when I imported the letters and numbers into the sheet it looks just like the above. However on review I cut and pasted back to notepad and the data looks like this:
"A B C 12345"
So its adding a tab in the password thats thats a problem, How do I remove this extra white space between each comma delimited digit? without having to manually delete it ?
Remove The Extra Space And "*"
I have column A which i have sorted which contains some cells with an * and some without, like this:
07:30 - 08:00
07:30 - 08:00 *
What I want to do is remove the extra space and * wherever they are present in column A without a manual replace
Locate Text String After First Space And Before Last Space
I have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?
I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.
~C CULT NUCLEUS 3X2 SPRING WST BK XL
Desired results: D60
CULT NUCLEUS 3X2 SPRING WST BK
COUNTA Not To Counting Space Bar Space
I have the following formula that works fine until someone uses the space bar to clear a cells contents
When the space bar is used to clear a cells contents the COUNTA statements includes the space in the count. How do I count the number of cells with content and exclude the space bar space in a cell?
Remove Non-alpha Characters From Alphanumerics With Option To Remove Numbers
I have found a very useful UDF for removing non-alpha characters from strings. (See below, Credit for posting to Stanley D Grom - Ozgrid post ´Removing Non-alpha Characters From Text´).
Private Function RemoveCharacters(InString As String) As String
Dim intLoopCounter As Integer
Dim intStringLength As Integer
Dim intASCIIVal As Integer
intStringLength = Len(InString)
InString = LCase(InString)
For intLoopCounter = 1 To intStringLength
intASCIIVal = Asc(Mid(InString, intLoopCounter, 1))
If intASCIIVal >= 97 And intASCIIVal <= 122 Then
RemoveCharacters = RemoveCharacters + Mid(InString, intLoopCounter, 1)
1. Could the UDF be modified such that any part of a string contained within brackets is also removed (e.g. "NLGA High Street (West-Enfield), EN6" becomes "nlgahighstreeten")?
2. Can an argument be added to the format of the UDF, such that numbers (0 to 9) are either included or excluded (e.g. RemoveCharacters(A1,1) where the argument ´1´ would include any numbers (0 to 9), so "NLGA2003 High Street (West-Enfield), EN6" becomes "nlga2003highstreeten6")? ´blank´or ´0´would exclude these numbers, i.e. would return "nlgahighstreeten"
Put The Space
We have a system that used to export postcodes with the " "(space) in the correct space, the system has changed and no longer requires exposts with spaces
I need a formula that puts in the space depending on if it has 7 digits or 6
TE557TT needs to become TE55 7TT if postcode is 7 chracters " " after 4
TE57TT needs to become TE5 7TT if postcode is 7 chracters " "" " after 3
Blank Space Using 'IF'
At the top of my spreadsheet I've got the date displayed using TODAY(). In 'G5' theres a proposed collection date.
In 'F5' I entered, =IF(G5>$D$1+1,"PENDING","NOT COLLECTED"). Which is fine except, if 'G5' is blank I want 'F5' to be blank also. And if a date is removed from 'G5' I want 'F5' to be blank. I've tried various things with "" but I cant get it to do what I need. I'm sure this is very easily cured, but not by me clearly..!
Blank And Space
When using SUBTOTAL for counting values in a column, well this function is counting also the blanks cells having space inside
Well i can use an COUNTIF to avoid this problem, but when using autofilter , the count is gone, that's inconvenient.I can use autofilter to select blanks and then delete space inside but is quite long.
I chopped a macros inspired by jindon:
Dim X As Integer
Dim r As Range
X = CLng(InputBox(Prompt:="Quelle colonne?"))
If (X < 1) + (X > Columns.Count) Then Exit Sub
lastRow = ActiveSheet.Cells(Rows.Count, X).End(xlUp).Row
For Each r In Range(Cells(1, X), Cells(Rows.Count, X).End(xlUp))
If r.Value = "" Then
r.Value = ClearContents
Add Space Before Capitals
I have a column with thousads of names
Is there a custom way to delimited the text by Capitol letter.
Or, to have the text string searched and then insert a space in front of every caps it finds to get the output.
Removing Space At The End Of A Value
I have a set of data in a column and I'm trying to add them but can't because of the way it was imported. Each cell has a number with a space at the end. How do I remove that space without having to manually go in there and deleting via F2 > backspace, F2 > backspace, and so on.
Add A Space Before Every Cell Value
I'm trying to automate the importing and processing of a fairly large formatted text file (~15000 lines) containing many tables of data. I've been refining this process for several months and recently was alerted to a problem. A few of my tables have widths greater than 255 characters (309 to be exact).
My process involves opening the text file in Excel then performing a .Copy on the Worksheet into ThisWorkbook, naming the sheet "Source". I then perform up to 66 separate parse operations on the various tables depending on which options a user selected from a form.
The problem is that I assumed that the Copy Method would simply make a duplicate of that sheet in ThisWorkbook. Instead, it seems to have truncated any columns that are longer than 255 characters, leaving me with partial data in a few tables.
My workaround was to perform a TextToColumns on the text file prior to the import such that it would simply split the data into columns that could be reassembled on the other side. In doing so, I seemed to have stripped a leading <space> from each cell which was apparently put there previously. This is causing a lot of problems for my formatting code which also uses TextToColumns to separate the tables into columns. The simplest solution seems to be trying to add the spaces back in, assuming there isn't a better way to import this data in the first place.
Just prior to copying the sheet into ThisWorkbook, I'm using the following code after the TextToColumns to add the space back in, but it's taking an awfully long time and causing a noticable time delay in processing my code and adding considerable size to the finished workbook it creates. If someone could recommend a better solution, either to the import process or to replace this God-awful loop, I'd appreciate it. Thanks.
Application. ScreenUpdating = False
For i = 1 To 65535
wkbk.Sheets(1).Cells(i,3).Formula = " " & wkbk.Sheets(1).Cells(i,1).Value
wkbk.Sheets(1).Cells(i,4).Formula = " " & wkbk.Sheets(1).Cells(i,2).Value
wkbk.Sheets(1).Cells(i,1).Formula = wkbk.Sheets(1).Cells(i,3).Value
wkbk.Sheets(1).Cells(i,2).Formula = wkbk.Sheets(1).Cells(i,4).Value
Application.ScreenUpdating = True
Also, I don't know how long the actual file will be, so I'm almost forced to assume 65535...
Removing An Added Space
Our system, when displaying times adds a space before the time, space05:14:15 - space14:56:39, When I use this formula, =(F292-E292+(F292<E292))*24-0.5, to figure out hours worked, it does not work. If I remove the space, the formula works fine. Is there an easy way to automatically remove the space instead of having to do it manually?
Locate 2nd Space From Right And Truncate
This formula finds the last space from the right and returns the values less the last space and whatever is to the right-
=TRIM(IF(LEFT(Y25,2)="~C",REPLACE(LEFT(Y25,FIND("`",SUBSTITUTE(Y25," ","`",LEN(Y25)-LEN(SUBSTITUTE(Y25," ",""))))),1,FIND(" ",Y25),""),RIGHT(Y25,LEN(Y25)-FIND(" ",Y25))))
Results of a item of a whole size:
LAKAI KOSTON SLCT INDY SHOE BK
However- I forgot I had added a criteria to convert records that have a fractional value from decimal to a fractional value and an extra space shows up. I need to alter the above formula to handle this additional condition, returning the value w/ out the second space and the size 10 shown below.
Results of an item w/ a fractional size, ie. 10 1/2:
LAKAI KOSTON SLCT INDY SHOE BK 10
Linked to this post: new post started to help avoid confusion: but wanted to show prior material...
Insert A Space In A Postcode
I'm trying to find a formula that will put a space in the correct place in a British postcode.
I have a column I need to sort this way. Some of the postcodes already have the correct space and others don't.
British postcodes can be in several formats......
n = a letter
1 = a number
On a side note I need to make all the text uppercase. In the column some already have uppercase and others don't.
Copy Column With A Space Row
I would like a macro to copy the data in Raw1 and Raw2 from sheet1 into sheet2. but with a space row between data as shown in attrachement.
the number of rows in Raw1 and Raw2 is always the same. but the number of rows can be very big and unknown.
I have named the title of Raw1 as "raw". becasue I want the macro will still work when I insert a column before it.
Blank Space At End Of Cell
in my workbook I have a list of names. Some of these names have a blank space at the end of them. How do I get rid of that blank space? Basically, it might say:
And if you put your cursor at the end of each of those names, you'll see that some have a blank space at the end, and some don't. How do I trim this blank space away from the end?
Finding The Last Space In A String
there is AT() which finds the first occurrence of a string searching from the left like FIND() and SEARCH(), and RAT() which finds the first occurrence searching from the right-to-left.
A single column with names:
Jane Marie Smith
Dr. Alex R. Jones
I need two columns that would look like:
Dr. Alex R.........Jones
Space In The Data Of A Cell
I have a column of data that should be showing as currency but will not format that way because there is a space at the end of the cents. I tried doing a CtrL+H and replace the space with nothing but the space remains.
Using MID And Stoping When You Hit More Than A Single Space
I have a large spreadsheet with a data dump from a database program. The formatting of the exported data dropped multiple values into the same cell. I am trying to come up with an equation to separate these values into separate cells.
The problem is that the length of the data varies. I don't need the first 6 characters of each line. I was thinking of using MID to start at the 7th character. The second piece of data that I want to capture on each line varies in length. There is, however, multiple spaces between the second piece of data and the third. Is there a way using MID to have the count stop once it encounters more than a single space?
Macro To Insert A Space
I've got a list of postcodes in one column and some of the postcodes do not have the correct amount of spaces between the characters.
So I'm looking to have a macro that will insert a space after each third character and then possible a separate macro to insert a space after each fourth character.
Creating Space After Initial
I HAVE ON EXCEL SHEET IN COLUMN A NO OF CUSTOMER NAME THEIR SOME ROW NAME WITH ANICIALS WITHOUT SPACE TYPING for example (G.K.KHAN).
I WANT FORMULA AND AUTOMATICALLY SPACE AFTER ANICIAL for example (G.K. KHAN) LIKE THIS.
Eliminating Leading Space
Trying to manipulate basketball statistics copied from websites ... each cell has a leading space before the number(s) ... is there any way to globally eliminate the leading space from the cells
Tried find/replace, finding [space] replacing with 0 (which would then be disregarded ... didn't work
Tried converting all cells to number format, didn't work
Space Between Text And Number
I have a list of phone numbers in which name of the person and phone numbers are joined together. I would like to separate the name and phone number. Is there any way to do that. Example: I have the text like George9898989898, now i want it to appear as George 9898989898.
Separating Characters By Space
I have following kinds of texts in a column.
I want to convert above texts with space between every character as follows:
M I S C E L L A N E O U S
E Q U I P M E N T
J B K U 3 4 8 5 9 7 - 3
T - 2 2 5
7 5 9 8 4
Formula For Counting The Space
Is there any formula that will count the space of a cell. For Example. If I type Mr. Ashish Patel in a cell the formula should give me count as 2 as there are 2 spaces in this name One after Mr. and another after Ashish.
Space After Comma In Names
I have a list that contains names in the format
Lastname, first name
But some of the names have no space after the comma - which is what I am trying to achieve here
I would like to insert a space after every comma in the name, when there is no space. I am looking at a formula based approach to solve this.
Trim Left Of Space
Dim strMonth As String
Dim iYear As Integer
Dim StrMnthYear As String
strMonth = Trim(Left( Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare)))
iYear = Mid(Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare) + 1, 4)
StrMnthYear = Trim(Left(Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare) + 4))
I have a column of cells likes:
5/5058 Jack Daniels
5/29AA Crown Royal
I want to delete everything to the left of the first space.
So it will look like:
It has to be vba though. I have done alot of trim in just formulas but this is first time in VBA. The above code is one I found by searching but not sure what to do to modify it.
This will be for range AM2:AM2000
White Space Around Chart
I'm making five charts on one sheet and there's so much white space. I removed the border, got rid of the plot area, and have tried to send the charts back but there's so much white space. QUESTION: Is there a method to elimite white space on a chart/graph?
Add Space If Number Is X Digits
In my worksheet there is a column with values of either 3 or 4 numbers. If the value only has 3 numbers I would like to add a space before the first number, to ensure the proper line-up when saving the sheet as a text file. How can I do this (conditional formatting or macro??)
Finding Characters Before A 'space'
I am trying to find numbers before a space character.
In column 1..................to return in column 2
23 cars................................................. 23
5 trucks................................................. 5
150 vans.............................................. 150
I can't use MID Function as it can be 4 numers long...
Hyperlink Problem If Space In Sheet Name
I've a problem using hyper link when I've a space between sheet name…… Please guide me in this regard.
Where A5 is First Sheet Name "Jan" and B5 is second part of sheet name "Expense".
It works properly but when i've space in sheet name then unable to work. I've used below format but still no luck
Also, If I have space in file name than its also not working.
Please give the solution in both cases of Space in File name & space in sheet name in my attached file.
Delete String After Last Space In A Cell
I am interested in some sort of macro or formula that will strip all of the characters in a cell that come after that last space. My difficulty lies in that the string isn't a constant character count nor is the string always the same.
American Legion Post 8754 Hartford
I would like for it to say:
American Legion Post 8754
Replace Blank Space With Comma
I have the following code which is save Sheet as a text file. I know there are some options in Excel for saving, but it is not saving as ".txt" file.
I would like to modify this code to replace blank space with comma between Cells.
Private Sub CommandButton1_Click()
Application.DisplayAlerts = False
' Save file name and path into a variable
template_file = ActiveWorkbook.FullName
' Default directory would be c:temp. Users however will have the ability to change where to save the file if need be.
' Notice that i'm only allowing the save as option to be of .txt format.
' I'm also attaching the current date to the file name............
Open Txt Files Delimited, Space
On a daily basis I open about 35 text files in Excel at one time, and then must responde to 35 dialog boxes:
"This file is not in a recognizable format" - I click OK
"Delimited or Fixed Width (default)" - I change to Delimited
"Delimiters listed with Tab as default" - I change to Space
I go through that 35 times. I don't save these files that I have opened, but once they are all open I paste each one in a separate worksheet in one workbook.
Can I at least change the defaults on these text boxes to Delimited, Space? That way I would just need to click on OK, then Finish for each file.
I am using Excel 2000.