I am trying to do a vlookup within a macro.
However this always shows the first result in the first row but the rest of the rows just show #REF.
I want it to look up 100's or rows and shows either the result or N/A
Once I create the macro this is what the VBA is telling me: [Code] ......
I have a column of text strings in a2.a??? this is my data. Each text string has a persons name somewhere in it with other text around it.
In column c2.c??? i have text names of people names im searching for. eg. bob,jane,harry
what would be a pratical use of the vlookup function to return the name in column b2.b??? if the name from C was located in the string in A this is a non case sensertive requirement.
I have created a macro that copies the outcome of a specific calculation (that is driven by random numbers) and pastes it (as values) into a seperate table. It then recalculates the sheet, copies the new outcome and pastes it into the same table at a row beneath the previous one.
However, I would like to be able to determine how many times this loop is repeated (i.e. how many rows of outcomes will be generated) without having to change the macro each time. Is this possible? Maybe by just linking it to a cell where the number of outcomes/repeats is specified.
I am trying to repeat this macro until the last row of data present in column "D".
Sub inserttext()
'
' inserttext Macro
'
'
Range("D2").Select
ActiveCell = "Test Description:" & Chr(10) & "" & Chr(10) & "Expected Results: ERROR level fires stating " & ActiveCell
Range("D3").Select
End Sub
I have a workbook with 4 worksheets. I have a macro ( Cntrl + U ) that runs a series of steps and prints the results with it ending on the beginning page. This works well but I want it to repeat the macro until it reaches a blank cell on the starting page.
View 9 Replies View Relatedcan I add to a macro that will repeat that macro on every subsequent worksheet in the workbook.
View 4 Replies View RelatedHow to repeat excel Macro?
View 11 Replies View RelatedI have many set of numbers in column A and Coulmn B each set separated by space.I need to repeat each set to n number of times.
View 14 Replies View RelatedThis macro is recorded, but I need it to start on row 2 and repeat down to row 3000. What changes do I need to make.
I'm trying to create a macro to input information into a cell then repeat until the information stops.
So say I have 10 rows of information that fill up A1:D10. in E1:E10 I'd like a macro to insert some data into E1 then go to E2 and do the same until the end and then stop. So since A11:D11 would be blank the formula would just stop.
I actually work on 100's of cells a day and this is for a bigger project I'm trying to put together or I would just drag.
This auto run macro does not seems to run/repeat itself daily. I can't figure out why am I missing something? My end result should be that these reports run at the times listed on the macro every day 24/7. The spreadsheet will be on a computer that is never off.
VB:
Private Sub Workbook_Open()
Application.OnTime TimeValue("8:00:00"), "AThirdshift"
Application.OnTime TimeValue("8:00:00"), "BThirdshift"
Application.OnTime TimeValue("8:00:00"), "CThirdshift"
[Code] .......
I have a very simple macro for recalculating formulas and printing the page.
I need a way to show an input box where the user can say how many times to repeat the process i.e. 2x = recalculate, print, recalculate, print.
I'm trying to repeat a macro a set number of times depending on the number a person inputs into cell B3.
Here it is currently:
Columns("C:D").Select
Range("C4").Activate
Selection.Copy
Columns("E:E").Select
Range("E4").Activate
Selection.Insert Shift:=xlToRight
Range("C3:D3").Select
I've recorded a macro which selects a few cells in a row, copies them and pastes them again over the same cells (special paste - only values), and I've attached this macro to a button.
I would like the macro to repeat the same action on the next row for the same columns, each time the button clicked.
How to update the macro to move to the next row each time initiated?
I haven't worked much with macros and the work I have had to do so far I have been able to figure out by searching forums such as this one. However, I need this community's help with what I am currently working on. Here's the code I have so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("E2:E2")) Is Nothing Then
Exit Sub
Else
Range("D1").Select
Selection.AutoFill Destination:=Range("D1:D2"), Type:=xlFillDefault
Range("D1:D2").Select
End If
End Sub
I need this code/behavior to repeat in cells E3:E10, skip a couple rows, then repeat in E13:18 skip a couple more rows, repeat in E16:E21, etc.
Version: Excel 2000
OS: XP Pro
I have spreadsheet which consists of two columns of data.
Column A contains a gerneric heading/group and Column B details some results for each heading/group; these results cover between 16 to 40 rows.
Basically, I need to transpose each heading/group's rows of results data into the same row as the heading/group row; then delete the rows where the results data was copied from; then I want to go to the next heading/group in Column A and repeat the process - transposing the results into a row.
I have written a simple macro which seems to work intermittingly - one which doesn't repeat or loop though. Sometimes I get the Runtime Error 1004 and sometimes the macro overwrites the transposed row if the results are listed over 16 rows.
My draft macro code is as follows:
Sub Transpose()
'
' Transpose Macro
' Macro recorded 27/11/2008 by Hunter
'
' Keyboard Shortcut: Ctrl+p............
Sub For_Adam()
For x = 1 To Range("G7")
Calculate
Range("G11").Select
Selection.Copy
Range("B15").Select
ActiveCell.Offset(x, 0).Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Next x
Application.CutCopyMode = False
End Sub
Now all I want is for this to be repeated in the next column, so everything is exactly the same but it doesn't start in B15, but starts in C15, then D15 etc.
I have never built or used a macro before and need very clear step by step instructions. I am just assuming that a macro is the answer to what I am looking for but if there is a simplier solution that would be fantastic.
I need to be able to repeat a row of data a specified amount of times.
Example:
3 Yellow James
2 Green Mark
5 Purple Sue
1 Orange David
Needs to look like:
3 Yellow James
3 Yellow James
3 Yellow James
2 Green Mark
2 Green Mark
5 Purple Sue
5 Purple Sue
5 Purple Sue
5 Purple Sue
5 Purple Sue
1 Orange David
I have 2 sheets of date. Sheet 1 contains a temple range A3:T162. This set of data is repeated x number of times. Sheet 2 contains a range of data A1:A3 repeated x number of rows. The data is different on each row. So if I have 10 rows of data in Sheet 2 , there will be ready in Sheet 1 10 sets of dats, as in range A3:T162.
I would like the following action:
the contents of Sheet 2 Row 1 to be pasted into Sheet 1 cell A3,B3,C3
then contents of Sheet 2 Row 2 pasted into A163,B163,C163,
then contents of Sheet 2 Row 3 pasted into A323,B323,C323,
So basically each consecutive row on Sheet of column A,B,C is pasted back onto Sheet 1, 160 rows below until all contents of Sheet 2 has been exhausted.
I have attached an excel sheet with the relevant data.
I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.
Sub Macro1()
'
' Macro1 Macro
'
[Code]....
I have a workbook where I need to sort data with range (K2:L24), then move down 208 rows and sort range (K210:L232) and repeat this upto 1000 times. I have shortened a recorded macro as an example and would like to know how to loop or repeat.
Sub Macro2()
'
' Macro2 Macro
' Macro recorded 6/04/2011 by Greg
[Code].....
I am new to macro. I am trying to convert the following from column 1 to column 2.
1
1
0
1
3
3
[Code] .....
In the left column, the numbers who are greater than 0 can have the same number of rows of zero.
Is there anyway I can do it to convert Column 1 to column 2.
I have 10 worksheets. They are labelled 'FEB', 'MAR', 'APR', etc...to 'NOV' (NB: JAN & DEC not needed). In column "G" on all these sheets I have the data as "CURRENT" or "OVERDUE". The first 3 rows on every sheet are headers, so the data starts at 'G4' on every sheet.
I then have an "OUTSTANDING" sheet which will display all of the "OVERDUE" items from the various months. I have an UPDATE_Click() event which when actioned needs to search all the column Gs in the month sheets and then copy the data from column 'B' to 'F' of the corressponding row to an "OVERDUE" result. The data from B-F then needs to be pasted in the next available row on the "OUTSTANDING" worksheet (starting at row 4, as first 3 rows are headers with merged and unmerged cells).
Nothing fancy, when the search go does the column and hits a blank cell that means its the end of the list and can move on to the next month.
Im trying to get my macro to open allow me to select multiple workbooks, then have each workbook open up and copy A2:N2 and down and paste these into my active workbook, under each other, ie on the next available row (basically combining all the workbook data together to create a big list.
The below code works to open a single workbook, copy the data and paste it in at the next available row, but I have to keep running the macro for each workbook whos data I need to import!
How can I modify this code so I can select more than one file? I need something like for each wb .....at the end next wb...until the macro has done the below for all selected workbooks.
VB:
Sub openandcopy()
Dim wb As Workbook
Dim ws As Worksheet
Set ws = ActiveSheet
Set wb = Workbooks.Open(Application.GetOpenFilename)
[Code] .....
Keep getting compile error.
Sub CreatingCT()
'
' CreatingCT Macro
Dim ConsolidatedTrend As String
'Path to File
ConsolidatedTrend = "(d:2013"&(IIF((MONTH(NOW())+1>9),"(1","(0")&(MONTH(NOW())+1)&") "&TEXT(DATESerial(YEAR(NOW()),(MONTH(NOW())+1),1),"MMM")&"Consolidated Trend - "&YEAR(NOW())&" "&MONTH(NOW())+1&" + "&(12-(MONTH(NOW())+1))).xlsb)"
ActiveWorkbook.SaveAs Filename:=ConsolidatedTrend, FileFormat:=xlExcel12, CreateBackup:=True
End Sub
I need to repeat the following copy past macro the number of times equal to the value in column B and repeat the process for rows 3 through 27. It would end up being a loop with in a loop. The data in C3:H3 will be pasted onto the "Fixt#" sheet as many times as the value in column B3. The idea is to create an individual entry on the "Fixt#" sheet for each row on the "Totals" sheet.
Code:
Sub Create_Fixt_SheetI()
'
' Create_Fixt_Sheet Macro
'
'
Range("C3:H3").Select
Selection.Copy
Sheets("Fixt#").Select
ActiveSheet.Range("B" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
I have a list in Excel, and it has the company in one column, and it's information in the next x rows until there is a blank row (4-7 rows). I get that you can copy the rows under the Company, transpose next to the company, and then delete the contents of the cells that you just took the data from, but I have 6200 rows do to this to, for 500+ companies. I tried recording a macro for two entries, and this is what I have (see below), but how do I modify this so that I don't need to type in every single range, and it will do it to the whole column? The data is in column A, I am posting in column B.
Basics for Macro Requirement:
1. Find the blank cell in row A
2. Skip the next cell/row (this is the company)
3. Select all the cells beneath the company cell, until it reaches the blank cell underneath
4. Copy, transpose these cells next to the Company cell (transpose in column B)
5. Delete the contents in row A that were just transposed
6. Find the next cell with data (company)
7. Repeat Steps 2-6
My recorded Macro:
Sub Macro2()
'
' Macro2 Macro
'
' Keyboard Shortcut: Ctrl+q
'
Range("A3:A8").Select
[code]....
I need to repeat the following two actions one after another therefore I cannot use F4 key
The actions are :
1) select some cells in two rows and colour them yellow.
2) select the last two cells of the rows ans merge them.
these are one after another where F4 will repeat only the 2nd step but I need the 1st step of colouring.
Are there any short cut keys or method or recording to repeat the above steps when necessary.
I had a spreadsheet with 45 fields, endind with a SUM in field 47.
I've inserted new fields, exactly 531. The SUM doesn't know that and still thinks that I have 45 fields:
SUM(F2;F5;F8;F11;F14;F17;F20;F23;F26;F29;F32;F35;F38;F41;F44)
How do I add automatically the value 3 to F44, continuing to add the value 3 to 531? So I want:
SUM(F2;F5;F8;F11;F14;F17;F20;F23;F26;F29;F32;F35;F38;F41;F44;F47:F49; F52; ETCETERA)
How do I keep repeating
If Range("E22").Value Range("G3").Value Then
Rows("22:22").Select
Selection.Delete Shift:=xlUp
Until E22 does = G3
Then I need it to go to Row 23 and do the same.
My goal is to leave only rows (between rows 22 and 50) that have the same value in its column E that match cell G3.