Reset Last Used Cell Without Saving
Nov 14, 2008
if there is a way to reset the last used cell without saving? I have macro first brings in about 30,000 rows of data, but deletes most of it before it finishes running. This works fine, until the third time I try to refresh the report, when Excel won't let me insert another 30,000 rows of data because it would push the last used cell off the bottom of the report and that's apparently not okay, even if the cell is completely blank.
I have it set to automatically clear the blank rows and save when the report opens, but that doesn't help if they run it too often before that happens. I don't want to do a background save because they may have made changes that they don't want to save.
View 9 Replies
ADVERTISEMENT
Jan 19, 2007
Is there a way, either in Excel or using VBA, to reset xlLastCell without having to save the workbook?
View 4 Replies
View Related
May 28, 2009
i have cells A1 to A10 filled with numbers
i have cells B1 to B10 blank
what i need to do is when something is typed in cell B1 - A1 to A5 are reset to zero and when i type something in cell B2 - A2 to A6 reset to zero.
I have tried to do this as a range ie
A1- A10 have numbers in B1 - B10 copy these numbers and reset if anything is typed in C1 with this formula =IF(C1:C5="",A1,"0") what it should do is reset B1 to zero if anything is typed in C1-C5 but only when something is typed in C1 does this work ..
View 9 Replies
View Related
Jul 24, 2013
I just can't seem to get the syntax correct for setting or resetting a cell value using the OnTime schedule function. It looks like the cell value changes randomly and after several cycles it just runs non-stop very, very quickly and I have to use the ESC key to break out of the loop.
Here is my code:
VB:
Sub RunOnTime()
dTime = Now + TimeValue("00:00:10")
Application.OnTime dTime, "RunOnTime"
If Cells(1, 4).Value <= Cells(6, 2).Value Then
Cells(1, 4).Value = Cells(1, 4).Value + 1
[Code]...
View 1 Replies
View Related
Nov 12, 2013
My sheet has a Data Validation drop down menu "Department", where the user selects a Department. Based on this selection, another Data Validation cell "Team Leader" gives a list of Team Leaders to choose from. This works perfect. Change the Department, you get a different list of names. The problem is that if I have both a Department and a Team Leader selected, and then I change the Department selection, it keeps the Team Leader cell filled with now invalid data (the Team Leader from the previous department). If I then click on the Team Leader cell, it has the correct names listed to choose from, but until I do that cell retains the old information. Is there any way to blank the "Team Leader" cell, or push data to it (I've included a Choose a Team Leader entry in my list of people), when I change my Department selection?
View 9 Replies
View Related
Jan 19, 2008
I basically have four cells
c8 = goods in (new components in)
c9 = kanban stock (current qty in stores)
c10 = current stock (=kanban stock minus allocated)
c11 = allocated (number on order)
What I would like to be able to do is enter a figure in c8. This would then start the macro to update c9,10 and 11.
The problem I have is that if i enter a figure into c8 sure it alters the others if i do a quick =sum formula but does not reset. Therefore if I put for example 6 in cell c8 and then want to add another 8 all other cells alter accordingly. I want all cells apart from c8 to update and hold the figure after c8 has been entered.
View 12 Replies
View Related
Jul 23, 2013
I just can't seem to get the syntax correct for setting or resetting a cell value using the OnTime schedule function.
It looks like the cell value changes randomly and after several cycles it just runs non-stop very, very quickly and I have to use the ESC key to break out of the loop.
Here is my code:
Code:
Sub RunOnTime()
dTime = Now + TimeValue("00:00:10")
Application.OnTime dTime, "RunOnTime"
If Cells(1, 4).Value
View 5 Replies
View Related
Mar 10, 2009
I am trying to build a spreadsheet that tallies hours worked and hours available for the next day. The key to this spreadsheet is the number 70. A worker can accumulate no more then 70 hours in an 8 day period, however after any day with no hours worked the rule resets to 70 hours available again. I have attached a sample spreadsheet so you can see how this should work.
View 9 Replies
View Related
Feb 2, 2009
I've found a # of threads on this subject but have been unable to find the function I need.
I've got a spreadsheet (attached) to calculate vacation time, but I can't figure out how to make the used time reset on an anniversay date. For example, if Employee 1 has earned 80 hours of vacation but only used 40 by his 4 year anniversary date, how do I make unused time roll back to 80 the day of his anniversary?
Here's the structure: 2 Personal days given Jan. 1, then 2 more on July 1 to employees here at least 6 months. Those whose 6 months fall after or between are awarded 2 days on their anniversary then accrue as normal. Unused personal days are lost at the end of the year. Vacation time is 40 hours after 1 year, 80 hours at 3 yrs, then 120 hours at 5+.
View 9 Replies
View Related
Aug 5, 2006
1. I created a "Top Category Data Dependent Validation List for sub-categories” in the attached spreadsheet. The selection from the Category drop-down list in column B, then drives or limits the choices in the Sub-category drop-down list in column C.
Credits: To achieve the above technique, I used the "Dependent List Validation" document as a technical reference.
the document is available from http://www.ozgrid.com/Excel/dependent-lists.htm
2. If the user updates the Category selection in Column B, then the value in the corresponding row in Column C should be "reset to a ( NULL/Clear) value," as to automatically prevent any human-error in forgetting to also update the Sub-category data in Column C.
(Optional Reading--the following steps are not related to steps 1 & 2 above, just notes regarding other data validation process created in this spreadsheet
3. I also created another column (D) that gets automatically populated with the Category ID,
based on the sub-category drop-down list selection in C.
4. Also in this spreadsheet, a macro checks for any "missing required data
before allowing the end-user to save this worksheet. As an example, In Column A, if there is a "RecordId" that exists in the same row, then the macro checks if the user has entered required values in Column B, C, "AND/OR" D. If the end-user did not enter any of the required values,
then an error message pops-up with this message:
"Cannot Save this file due to Missing Required Data. Please review highlighted record and complete missing data."
Credits:
Special thanks to:
-OzGrid Business Applications for writing code for a UDF (function that returns last word) that I used/modified a little bit to achieve Step 3.
-Carl (member name" carlmack") for his help in the methods I used in Step 4 above.
View 9 Replies
View Related
Jan 30, 2003
I have a spreadsheet that imports data, manipulates it then deletes 2 of the sheets then saves the file under a different name to the network. Is there any way to save this new worksheet without it storing the macros - so when the user open it, only the data is there and they get no prompt to enable macros?
View 6 Replies
View Related
Dec 12, 2006
I am trying to save this file but I'm having problems with "my Name" This information is in a workbook that is already opened called "Recaps" and the sheetname is "Data" and the value I am looking for is in "$C$5". I open another workbook called "Spare" and want to rename and save it to the code below.
Dim myPath$, myName$
Application.DisplayAlerts = False
myPath = "C:Service RecapsJohn Mudaro"
myName = Workbook ("Recaps) Sheets("Data").Range("C5").Value
ActiveWorkbook.SaveAs myPath & myName
Application.DisplayAlerts = True
View 2 Replies
View Related
Apr 14, 2013
When cell A1 changes in Excel to 1 (fed via an external com process) I want another cell, A3, to display the value of cell A2 (also fed by an external program)
I need A3 to keep displaying the same value of A1 until A4 displays 'A' at which time A3 to start to monitor for changes to A1 again (A1 will now not display 0)
View 3 Replies
View Related
Jul 1, 2009
I would like to set up my workbook so that I can save it by the combination of two cell values. The cells are A2 (which displays a country name) and E10 (which displays a string of numbers) and would like to specify the file to where to save the workbook which is:(G:BusUnitsShipping_RecievingInternationalInt'l Order FormsSpecific Orders). The following is a code I have tried that is close but not quite right:
View 2 Replies
View Related
Nov 18, 2009
When the user goes to File, Save As, I would like the filename to be populated from the contents of cells B2 and B3, i.e. 11/18/09-23. Is this possible? Also in the same code, can I specify that I want the destination folder to be K:Sheets?
View 11 Replies
View Related
Dec 2, 2011
I would like code to automatically save my spreadsheet with the name that is present in cell F4 of the activesheet. For example, I would like to save my file to desktop and cell F4 contains the text 'hitec 348'
View 5 Replies
View Related
Apr 26, 2012
I'm having some trouble creating a macro that will save the worksheet under the name of the cell ("G4") that needs to change to the next ascending number (i.e. 101101, 101102, 101103, etc). Have a macro but wont function after saving and never saves as the new cell #.
View 9 Replies
View Related
Mar 25, 2014
Is it possible to save information entered on a form to a named cell in a worksheet as opposed to in a range of adjacent cells? I am trying to use a form to populate a worksheet where the values stored will not be near one another.
View 1 Replies
View Related
Nov 8, 2009
I'm trying to open a workbook using a macro, then saving the workbook that's just been opened using a cell value as the title.
This is what I have so far ... to open up the workbook and then run a macro from there .. this works fine
Sub Test1()
'
' Test1 Macro
' Macro recorded 08/11/2009 by Tracy
'
Workbooks.Open ThisWorkbook.Path & "/MultiFuel Expense.xls"
Application.Run "'MultiFuel Expense.xls'!TestSave"
End Sub
This macro is the one I'm struggling with. I need to save a copy of the workbook I just opened (currently named MultiFuel Expense) in the same directory using the cell contents of G2 as it's name with _expense on the end.
Sub TestSave()
'
' TestSave Macro
' Macro recorded 08/11/2009 by Tracy
'
ActiveWorkbook.SaveAs Filename:=ThisWorkbook.Path & "" & Range("G2") & "_expense"
End Sub
View 9 Replies
View Related
Mar 18, 2007
I am trying to lock any cell within a set range that contains data but I want this only to be activated when the user saves the file.
View 3 Replies
View Related
Feb 7, 2014
[Code] ....
User 1 will enter date in column AA, then data needs to be copied to column CY (data in CY must not change again). I have a if formula that check if any AA and CY is the same. If any changes was done, it will give the cell a "YES" trigger to send a mail.
I think the .value is incorrect.
View 3 Replies
View Related
Mar 21, 2009
I would like excel to create the folder C:/Bill if it doesn't already exist when I click save/save as option and save the workbook in it with a filename that is a combination of text/values in cells A1 and A2 on Sheet1. Better if the save as dialog box appears with this option selected so that I have to just click Save in the save as dialog box to save it in "C:/Bill".
View 9 Replies
View Related
Jun 6, 2014
Cells B3 and B6 both have lists created through data validation.
If the value in B3 changes (by user selecting from the list), I'd like B6 to automatically change to "Select a take to retrieve" (which is the first choice in the B6 list.)
Likewise, if the value in B6 changes (by user selecting from the list), I'd like B3 to automatically change to "Select a version to take" (which is the first choice in the B3 list.)
View 1 Replies
View Related
Jul 16, 2014
I am trying to find a code that will allow me to Save Rows to a txt file with cell separator ?
I have put together this from other peoples work online and now all i need to work out is how to add a cell separator like a comer?
View 4 Replies
View Related
Sep 13, 2012
My set up win xp pro office 2007. Object is to save the text from a given cell to drive C naming the file with the value in another cell. E.g.
Contents of cell ("AA5") is a string and the content of ("D5") is a number
I have tried altering the code posted which i found on the forum, it works fine for the purpose as it was indented e.g. save the workbook and in my case saves it as the value in cell D5.
I guess I need to use some form of object to pass to the save as method but my knowledge of this is somewhat limited in addition as the is a possibility of either the cell being empty and the file name existing on the C drive, I need to disable the windows warnings and just go ahead and save it over writing what is on the C drive is of no importance as it will be the same data anyway, I can wrap the save in a "if Len ( AA5)= 0" to stop it trying to save if the cell if empty it the save the text string i am having problems with:
Option Explicit
Sub SaveAsExample()
Dim FName As String
Dim FPath As String
FPath = "C:"
FName = Sheets("Sheet1").Range("A1").Text
ThisWorkbook.SaveAs Filename:=FPath & "" & FName
End Sub
View 8 Replies
View Related
Nov 13, 2012
I'm actually using a macro that saves all the sheets from a workbook in new separate files, and save them in a specified folder.
Code:
Sub Estrazione_Schede()
Dim n As Long
Dim myNome As String
Dim myPath As String
myPath = "D:path"
[Code] ......
What I'm trying to do is that, instead of saving all the sheets in one folder, the macro would save them in different folders, depending on specific values in a specific cell of each sheet. I tried to modify the macro like this, but it doesn't seem to work properly:
Code:
Dim n As Long
Dim myNome As String
Dim myPathOne As String
Dim myPathTwo As String
myPathOne = "D:pathOne"
[Code] .....
With this code the macro ends up to check the condition only in the first sheet and then it copies all the sheet in the same folder.
View 2 Replies
View Related
Feb 3, 2009
Is it possible to create a macro attached to a button that allows me to save the workbook based on content of 2 cells in the workbook?
I like to save the workbook based on content of cell A4 that contend a text string. After that saving another time with the contend of cell A4 plus cell A9 which contend the today() function. I am doing this because this workbook is constantly updated and a backup copy is done based on the date the file is save.
View 9 Replies
View Related
Jan 7, 2009
I have created a form in a worksheet which I have added questions too and then locked all cells except the ones where I want the answers in.
I have then added a button to the bottom of the sheet called "Print and Save". This work sheet is called "form"
On a second sheet called "database", I have all the titles of the questions running from a -> k and nother else.
What I want to happen is the user input the information on "form" into the boxes available. Once they have completed the questions, I want them to be able to click on "Print and Save" so that firstly the page "form" prints, and then for all of the answers to be saved in "database" below the titles for each question.
I have had a play, but just don't know where to start. Also, once there is a row of questions below the titles, I don't want it to overwrite information already there, it needs to go onto the next empty row available.
Attached is my excel file.
You will see in the code that I have the code for printing.. I just found this on the net and it seems to work fine for me.
View 9 Replies
View Related
Jun 21, 2009
I have a worksheet in my workbook that contains data for 25 different airfoils, each one in a cell space of 3 columns and 50 rows.
In order to do some analysis on these airfoils, I need to save each 3x50 as separate text file to define input for analysis code.
How can I do this in VB in one macro?
View 9 Replies
View Related
Mar 30, 2013
I am currently trying to adapt the following code which is in VBA (Sheet1). It currently ensures mandatory cell entry of cell C2 before saving, and if this is not done then it would not save the item into the relevant directory. I would like to adapt this code so that cells B2 to R2 are all mandatory, and if they are not filled in a message box with the cell title (which would be in B1 to R1) would pop up. If the cells are not filled in then it will not save (the same function it carries out for cell c2 currently). The code is attached to a command button, i have tried to make the additional cells mandatory by playing around with the If Trim(.cells(2, 3).value) part of the code with the AND function etc however i have had not had any luck.
View 7 Replies
View Related
