Saving Sheets In New File In Different Folders Depending On Cell Value
Nov 13, 2012
I'm actually using a macro that saves all the sheets from a workbook in new separate files, and save them in a specified folder.
Code:
Sub Estrazione_Schede()
Dim n As Long
Dim myNome As String
Dim myPath As String
myPath = "D:path"
[Code] ......
What I'm trying to do is that, instead of saving all the sheets in one folder, the macro would save them in different folders, depending on specific values in a specific cell of each sheet. I tried to modify the macro like this, but it doesn't seem to work properly:
Code:
Dim n As Long
Dim myNome As String
Dim myPathOne As String
Dim myPathTwo As String
myPathOne = "D:pathOne"
[Code] .....
With this code the macro ends up to check the condition only in the first sheet and then it copies all the sheet in the same folder.
View 2 Replies
ADVERTISEMENT
Sep 29, 2013
I have this code that generates excel pages as pdf files, but I can't get it to save it in its individual folders. For example, I have the sheet name as Brian Lin, I want to save the pdf into the folder called Brian Lin, then if I have the sheet name as Lilly Tran, the pdf should save into the folder called Lilly Tran. Here's my code. The code is one step short of what I want it to do, it saves in the folder right before the name folders.
Code:
Sub Macro1()
Dim wsh As Worksheet, vWshs
Dim sFolderName As String, set_Path As String, name As String, hwas As String, sname As String, swsname As String
vWshs = Array("Rates", "Inputs")
set_Path = "C:UsersJonathanDesktopFaFundInvoices" & hwas & ""
[Code]...
View 4 Replies
View Related
Jun 3, 2006
I'm trying to save a spreadsheet using VBA which will also check that the directory exists and create it if not, all based on cell values in my spreadsheet. When I run my code it comes up with Run Time Error 76: Path not found.
Dim fname As String, dname As String, dname2 As String
fname = ActiveSheet.Range("E2").Value
dname = ActiveSheet.Range("G2").Value
dname2 = ActiveSheet.Range("H2").Value
Windows("Register Template.xls").Activate
ChDir ("H:")
If Len(Dir(dname2, vbDirectory)) = 0 Then
MkDir dname2
End If
ChDir dname2
ActiveWorkbook.SaveAs Filename:=fname
View 4 Replies
View Related
Nov 21, 2012
I have 40+ reports that I generate weekly for different clients.
I have the workbook set up so that each report is in a new sheet/tab and have a macro that runs through and saves each report as a PDF using the file name I desigate in a cell within the sheet.
My clients are now wanting the reports individualy branded to them.
My thinking is that I can list each clients name, phone, website, etc. in a new sheet then develope a marco that runs through and save the reports with row 2's infomation filled in on the reports, then row 3's and so on but one I don't know how to create a marco to do that and two they also want their logos on the reports.
Can I place an image in a cell and have it called into another cell? Can I place them all in a folder and have it call the image in based on the location and name?
View 1 Replies
View Related
Dec 12, 2012
I have numerous spreadsheets that I need to open and unhide a sheet, that has XML data stored in cell A1. What I need to do is copy that data in cell A1 and paste it into a text document and save that as an XML file saved as the XLS workbook name with a date stamp.
I'm running into many issues, the main issue is the saving as current file name, and the formatting of the text/XML file.
Here is my current code, which doesn't reference the current file name and is just very generic. Once I get the saving as file-name correct and the formatting of the xml file correct, I will work on it a bit more.
Code:
Sub Test()
Dim Rng As Range
Dim wb As Workbook
Set Rng = Range("A1:A2")
Set wb = Workbooks.Add
With wb
Rng.Copy
[code]....
View 4 Replies
View Related
Dec 12, 2006
I am trying to save this file but I'm having problems with "my Name" This information is in a workbook that is already opened called "Recaps" and the sheetname is "Data" and the value I am looking for is in "$C$5". I open another workbook called "Spare" and want to rename and save it to the code below.
Dim myPath$, myName$
Application.DisplayAlerts = False
myPath = "C:Service RecapsJohn Mudaro"
myName = Workbook ("Recaps) Sheets("Data").Range("C5").Value
ActiveWorkbook.SaveAs myPath & myName
Application.DisplayAlerts = True
View 2 Replies
View Related
Nov 8, 2009
I'm trying to open a workbook using a macro, then saving the workbook that's just been opened using a cell value as the title.
This is what I have so far ... to open up the workbook and then run a macro from there .. this works fine
Sub Test1()
'
' Test1 Macro
' Macro recorded 08/11/2009 by Tracy
'
Workbooks.Open ThisWorkbook.Path & "/MultiFuel Expense.xls"
Application.Run "'MultiFuel Expense.xls'!TestSave"
End Sub
This macro is the one I'm struggling with. I need to save a copy of the workbook I just opened (currently named MultiFuel Expense) in the same directory using the cell contents of G2 as it's name with _expense on the end.
Sub TestSave()
'
' TestSave Macro
' Macro recorded 08/11/2009 by Tracy
'
ActiveWorkbook.SaveAs Filename:=ThisWorkbook.Path & "" & Range("G2") & "_expense"
End Sub
View 9 Replies
View Related
Jul 16, 2014
I am trying to find a code that will allow me to Save Rows to a txt file with cell separator ?
I have put together this from other peoples work online and now all i need to work out is how to add a cell separator like a comer?
View 4 Replies
View Related
May 18, 2007
I think this is possible but cant find anything on it ........
View 9 Replies
View Related
Jan 30, 2003
I have a spreadsheet that imports data, manipulates it then deletes 2 of the sheets then saves the file under a different name to the network. Is there any way to save this new worksheet without it storing the macros - so when the user open it, only the data is there and they get no prompt to enable macros?
View 6 Replies
View Related
Aug 11, 2005
Does anyone have a macro that would list all the folders (with path) and
subfolders to an excel sheet but not the files?
View 14 Replies
View Related
Aug 16, 2012
I have a worksheet that has a number in cell K5 - the number is generated on "file open" code and is custom formatted as "TN"0000. Thus 1 appears as TN0001, 2 as TN0002 and so on. I am trying to save a copy of the workbook based on the this cells contents i.e. TN0001.xls, TN0002.xls etc. but the files are saved as 1.xls or 2.xls. The code I am using is
ActiveWorkbook.SaveAs Filename:="C:DataExcelFORMSDelivery Note" & Range("K5") & ".xls", _
FileFormat:=xlNormal, ReadOnlyRecommended:=True, CreateBackup:=False
I know I must make reference to format within the above....but how? if try something like
" & Format(Range("K5").Value, ("TN""0000")) & ".xls"
I get TN00000.xls
View 2 Replies
View Related
Jun 5, 2009
is it possible to type a document name in a cell,then run a code that searches a root dir and sub folders, find the existing document and open it?? for example
cell: "D20"
filename: DYAZES-001
root dir: "I:IsolationDataBaseIsolationProcedures
subfolders: DryMillA, DryMillB, Despatch, Maintenance
View 5 Replies
View Related
May 15, 2014
I have the following code that transfers all the Excel files in Folder 1 to Folder 2:
Code:
Sub Move_NRAuto()
Dim fso As Object
Dim FromPath As String
Dim ToPath As String
Dim FileExt As String
[Code]...
I'm trying to amend this code so that instead of hard coding "Folder1" into the code, I can loop this process through a number of folders (Folder 1, Folder 3, Folder 4, etc) and move all of the files in each of those folders into "Folder2".
Is this possible?
View 4 Replies
View Related
Jun 12, 2014
I need to back up files, which may be excel or MSword, by copying them from different directories, say C: to the backup directory, say X:. any vba to backup the files? I expect the vba can copy all file listed in column A.
E.g. C: est1File1.xls or C: est2File2.doc, and then pasted to the directory in column B. e.g. X:BackupFolder1 or X:BackupFolder2.
View 1 Replies
View Related
Dec 20, 2011
I have folders with different assigned folder icons based on the content in the folders.
I would like to arrange these folders in the window based on the assigned folder icons and then by alphabetical order.
How it is to be done. Can we make use of vba having the folders path list in one column of excel sheet?
View 9 Replies
View Related
Jun 28, 2014
Code that loops through all folders in a directory, to check each workbook in each of those folders. If any workbook name in any of these folders matches a predefined string, then open this workbook for some other codes to run.
View 2 Replies
View Related
Jul 7, 2008
I am setting up a "save as" macro that saves a file by replacing another file in a folder. Even though the macro has been recorded by approving the replacement (the prompt appears "the file --- already exists. Do you want to replace the existing file?"), when I run the macro, I am again prompted about replacing the file. Is it possible to avoid the prompt so the file is automatically saved by replacing the named file?
View 9 Replies
View Related
Aug 30, 2013
I was wondering if there is a way to write a macro that will take an excel file that I have called Alldata and then have it copy the first two sheets to a new workbook named something else( FullSparameter_0) and then copy the name of the third and fourth sheet into the new FullSparameter_0 workbook and then copy column A-E from sheet dB Alldata.xls and paste it into the FullSparameter_0.xls workbook in the same dB sheet in the same spot. And do the same thing with the Phase Sheet. i know this sounds confusing, but im really new to the VBA stuff.
I just need 15 different files from the original Alldata.xls that will be named FullSparameter_0, FullSparameter_1, .., FullSparameter_14. but each file will have the same two first sheets, Setup Information and Cal Verification, and the same last two sheet names, dB and Phase, but then in the dB and phase sheets, it will copy over the next four columns of data. so in FullSparameter_0 it will have column A-E from sheet dB in Alldata.xls in the dB sheet in FullSparameter_0 (Same with the Phase Sheets). Then in FullSparameter_1 it will have column A and Columns F,G,H and I (for dB and Phase). In fullSparameter_2 it will have column A and then J,K,L and M. Each FullSparameter_X will have the exact same first two sheets and then the other columns for the last two sheets will be pasted into columns A-E in dB and Phase.
View 1 Replies
View Related
Mar 16, 2007
found the following code which works for 1 workbook at a time. I am trying to save 7 workbooks at 1 time. Is it possible?
Sub SaveAsCell()
Dim strName As String
On Error Goto InvalidName
strName = Sheet1. Range("V77")
ActiveWorkbook.SaveAs strName
It will work on the first sheet but none after that. I need to have each workbook saved with the value in cell V77. Also if that is possible, is it possible to change where the file is saved as well?
Right now I have a master workbook that will open the 7 other workbooks, paste data onto several pages in each workbook. I would like the macro to save the workbooks. The workbooks are named: 02 Tuesday, 03 Wednesday, 04 Thursday, 05 Friday, 06 Saturday, 07 Sunday, 08 Monday.
View 9 Replies
View Related
Jul 8, 2013
macro and I think this has me on my way; however, I do not understand the code and I am having difficulty modifying it. It returns the path in cell $A1 of my workbook, but I get reference errors in $B1:$L1.
I would like for the code to start entering the values in row 2 of my current worksheet. Row 1 I want to make a header row. The first column I like having the file path. Can the path be changed to a hyperlink? I would then like for it to return the values in $AP1:$BC1 to $B1:$O1 of my current workbook.
View 4 Replies
View Related
May 21, 2014
I am attempting to create a macro that will create a new folder on the network drive Arie:quotes that will create the new folder and save the the file in the new folder. I need the name of the file and folder to be set to the master (worksheet) cell "B3". and then if possible have it be conditional that if cell "B40" on the same master (worksheet) has a value to have the value added at the end of the filename via hyphen. This workbook has numerous worksheets in it approx 15 worksheets. I am not sure if this is relevant.
As an brief example.
Cell "B3" on the master(worksheet) contains a job name I-40 bridge
So initially I would like the Folder name and file name to be I-40 Bridge
However once the Cell "B40" has been filled in with the value 54213 then I would like the file to renamed to I-40 Bridge-54213 and saved within the same folder.
I am currently working with Excel 2007 Pro edition on windows 8. I
I have found several other macro's that work with an auto save but i am unsure of how to change the directory to the network drive and show the correct file paths. This is the example of the macro I am currently working with.
Public Sub SaveAsA1()
ThisFile = Range("B3").ValueMkDir "C:NewFolder"ChDir "C:NewFolder"ActiveWorkbook.SaveAs Filename:=ThisFileEnd Sub
View 4 Replies
View Related
Aug 16, 2009
I have managed to get this far - I have put together a macro (from different threads on this site) that opens closed workbooks, copies data in one of the sheets (same sheet in each of 28 books), and pastes the data it into a master book sheet, each paste starting below the last. So that bit is working. The first bit of help I need is a line of code that will make the macro loop through a number of sub folders in a main folder. My code at the moment works as long as I specify a path that ends with the name of one subfolder, and it only loops through this subfolder. I would like the path to end at the folder that holds all the subfolders ('Workbooks' in the path below), and then add some code that tells it to apply the macro to all subfolders in this folder, so it loops through them all.
The second issue is that after the macro goes to the closed book(s), copies the data in there and pastes it into the master sheet (into columns E:FG), I then need it to go back to the workbook it just copied from, go the same sheet, to three specific cells on that sheet (FH1:FH3), copy the content, go back to the master sheet, and now repeatedly paste the content (values only and transposed) of these three cells into three cells (in columns B:D, with row number being dependent on what rows the first lot of data was copied into) next to every row it just previously pasted in for me. When it loops to the next workbook, it needs to do the same, and the three cells will have different content than the ones in the previous workbook paste.
I dont know how to define the range it needs to paste into the second time. I tried using the definition I used for the first paste (MCDrow), to tell it that it is the same rows, just different columns, but this is not working.
Here is what I have so far, which does the first part of what I need, except for needing a way to have it loop through all subfolder in the 'Workbooks' folder (at the moment it lists Barwon South West as a subfolder in that path, but I actually have multiple subfolders, not all called Barwon South (all different names) that it needs to loop through and do both the first and the second paste for. I have taken out the code I was trying to use to do the second paste, as this was not working and the code is pretty messy as it is (I sort of bumble along, being so new, and I know the code is not very clean or efficient!).
Can someone help me put in the few lines I need to loop through all my subfolders (if you give me an example I can probably extrapolate), but to get you started, three of the subfolders are Barwon South West, Eastern Region and Gippsland. And can someone help me put in the code that will do the second paste for each workbook?
Sub Click2()
Application. ScreenUpdating = True
Dim MCDrow As Long
'Dim SubFolders As String
MCDrow = ThisWorkbook.Sheets("Client Data").Range("A65536").End(xlUp).Row
Fpath = "Q:Clinical ServicesCS Statewide DatabaseWorkbooksBarwon South West" ' change to your directory
'SubFolders = True
Fname = Dir(Fpath & "*.xls")
Do While Fname <> ""
ThisWorkbook.Sheets("Client Data").Unprotect
Workbooks.Open Fpath & Fname
Worksheets("Client Data").Activate
Worksheets("Client Data").Unprotect
View 6 Replies
View Related
Oct 27, 2009
I have a series of files in *.ew7 format (i know its a random program)
I have some code which i can run which will simply open the relevant file and save it as xls.
The files are saved in multiple folders in format "yymm" eg: 0910 - oct 09.
inside each folder there is a ew7 file for each day in rthe format: "01ddmmyy" eg 01271009 = 27th oct 2009.
I have folders going back as far as may 2002 (in folder 0205) and i need a way to convert these all into xls format and save them in the same location.
View 13 Replies
View Related
Nov 7, 2007
I am trying to open excel files in a file path which includes folders which also have excel folders i wish to open there are quite a few.
At the moment i am working with this code but it fails to open excel files which are within the folders in the specified file path. Its fine for excel workbooks in the folder specified by file path.
This is the code
Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
[Code].....
View 9 Replies
View Related
Dec 5, 2011
I've made a macro that would create some folders on a shared drive.
there is an issue if the path i want to create is too long.
I get this error.
Uploaded with ImageShack.us
is there anything we can do to pass this or any solution for it?
View 5 Replies
View Related
Oct 11, 2013
I am trying to write a macro to open a specific file, but need to search multiple folders within folders to find it.
The file name I need to open is "Escalation Adherence-Details " & Format(Date, "mm-dd-yy") & ".xlsx".
I need to drill down to the Adherence Report folder and then have the macro search through folders for each year (2012, 2013, 2014, 2015, etc) and then each month within each year (1 January, 2 February, 3 March, etc), at which point I would then find that day's file.
So far I have the following:
Code:
Sub Open_ESCL_Report()
Workbooks.Open Filename:=*****.****.****.******.comsharesPurchasingTeam XEscalationAdherence Report & "Escalation Adherence-Details " & Format(Date, "mm-dd-yy") & ".xlsx"
End Sub
Each file is stored in it's respective month folder as .....Adherence Report(Year)(Month)(File).xlsx
View 3 Replies
View Related
Feb 18, 2009
I am trying to save my workbook in a specific directory with a specific filename and to incorporate a date field from within the spreadsheet. I have changed the format of the cell so it does not include / as i know this would not work. Saving it is the easy part but adding in the field from the spreadsheet is where im falling over.
View 2 Replies
View Related
Mar 31, 2014
I want to open C:Projects
and for each Project in Projects, create a new folder with the actual month (e.g. "03" or "12")
Im running the Makro from a file where I'd like to put the month in a cell -> so the code refers to cell("A1") wich has value 01 and creates a folder "01" in every projectfolder in C:Projects
View 3 Replies
View Related
Dec 31, 2009
The aim of the macro is to save all the sheets in .txt files named as the original sheets.
View 3 Replies
View Related