Two Cell Accumulator Then Reset First Cells
Jan 19, 2008
I basically have four cells
c8 = goods in (new components in)
c9 = kanban stock (current qty in stores)
c10 = current stock (=kanban stock minus allocated)
c11 = allocated (number on order)
What I would like to be able to do is enter a figure in c8. This would then start the macro to update c9,10 and 11.
The problem I have is that if i enter a figure into c8 sure it alters the others if i do a quick =sum formula but does not reset. Therefore if I put for example 6 in cell c8 and then want to add another 8 all other cells alter accordingly. I want all cells apart from c8 to update and hold the figure after c8 has been entered.
View 12 Replies
ADVERTISEMENT
Nov 30, 2011
I have this code:
If Not Application.Intersect(Target, Range("C6:C999")) Is Nothing Then
Application.EnableEvents = False
Target.Offset(0, 1).Value = Target.Offset(0, 1).Value + Target.Value 'C to D: 1
End If
As you can see, when I enter a number into column C it accumulates onto column D.
I want to be able to remove column C altogether so that when I enter a number into any cell in column D it accumulates there.
For example, D45=324, I enter 218 into D45, press enter, D45 now reads 542.
This only changes D45 and no other cell, but applies to all cells from D6 downwards.
View 1 Replies
View Related
Nov 4, 2007
In the cell A1 for example i write a values. After that a delete the old value and i write another value, and the another, and another, etc. I want to have in another cell the sum of all that values that i entered in A1.
Exemple:
1. i enter 1 in A1.
2. i delete 1 and enter 10
3. i delete 10 and enter 4
In B1 for example i want to have 0+1+10+4=15
View 10 Replies
View Related
Aug 30, 2008
I have some numbers I used to enter successively in Cell A5, what I want to get is the total of the entered number.
But I want the result to be entered in the same Entry Cell (A5)
Acually I tried many ways (VBA Codes and Worksheet Functions) to reach my goal but unfortunately I faild, so I hope that I find the answer here.
View 13 Replies
View Related
May 24, 2008
D11 contains the sum from D3:D10.
M11 contains a formula that points to D11 and acts as a numerical accumulator.
The formula is +M11+D11.
The problem that I having is when I'm entering numerical values in D3:D10, M11 doesn't reflect the correct mathematical values displayed in D11.
Eg.
D3=1
D4=1
D5=1
D6=1
D7=1
D8=1
D9=1
D10=1
SUM D11=8 M11=36
HMMMM...
View 9 Replies
View Related
May 18, 2006
I have a spreadsheet with 4 combo boxes and 2 cells that I need reset to a specific value when a button is clicked (the top value for the combo boxes, the function [today()] for one cell, and a specific date for the other). I figured I would put the function and the specific date in seperate hidden cells and the button would link to them, but whatever way gets the job done will work. I know I'll need to code this in VB, but as well as I know excel i've never played with basic before.
View 3 Replies
View Related
Jul 1, 2009
Trying to create a dynamic costing spreadsheet, where the user has to make multiple selections from many dropdown lists, all of which end up showing a total cost.
So far I have managed to create relatively dynamic lists, so that the choice in one cell will dictate what options are available in the next.
But if a user selects an options form all the dropdowns, and then decides to go back and modify a previous option to something else, the effected dropdown lists do not change until you click on the drop down arrow again and see the options available have changed.
Let me try and simplify...
'Menu 1' has two option: 'A' and 'B'.
If 'A' is chosen, then the next menu, 'Menu 2', will have options '1' and '2'.
If 'B' is chosen from 'Menu 1', then the options in 'Menu 2' will be '3' and '4'.
Lets say the user chose 'A' from 'Menu 1' and then '1' from 'Menu 2'... AND THEN went back and changed their choice in 'Menu 1' to 'B'....
'Menu 2' will still be displaying '1', even though the options are only '3' and '4'.
Can I make the dependant menu's either reset or blank or highlight to show that a change made somewhere else has made them currently invalid
View 10 Replies
View Related
May 28, 2009
i have cells A1 to A10 filled with numbers
i have cells B1 to B10 blank
what i need to do is when something is typed in cell B1 - A1 to A5 are reset to zero and when i type something in cell B2 - A2 to A6 reset to zero.
I have tried to do this as a range ie
A1- A10 have numbers in B1 - B10 copy these numbers and reset if anything is typed in C1 with this formula =IF(C1:C5="",A1,"0") what it should do is reset B1 to zero if anything is typed in C1-C5 but only when something is typed in C1 does this work ..
View 9 Replies
View Related
Nov 14, 2008
if there is a way to reset the last used cell without saving? I have macro first brings in about 30,000 rows of data, but deletes most of it before it finishes running. This works fine, until the third time I try to refresh the report, when Excel won't let me insert another 30,000 rows of data because it would push the last used cell off the bottom of the report and that's apparently not okay, even if the cell is completely blank.
I have it set to automatically clear the blank rows and save when the report opens, but that doesn't help if they run it too often before that happens. I don't want to do a background save because they may have made changes that they don't want to save.
View 9 Replies
View Related
Jul 24, 2013
I just can't seem to get the syntax correct for setting or resetting a cell value using the OnTime schedule function. It looks like the cell value changes randomly and after several cycles it just runs non-stop very, very quickly and I have to use the ESC key to break out of the loop.
Here is my code:
VB:
Sub RunOnTime()
dTime = Now + TimeValue("00:00:10")
Application.OnTime dTime, "RunOnTime"
If Cells(1, 4).Value <= Cells(6, 2).Value Then
Cells(1, 4).Value = Cells(1, 4).Value + 1
[Code]...
View 1 Replies
View Related
Nov 12, 2013
My sheet has a Data Validation drop down menu "Department", where the user selects a Department. Based on this selection, another Data Validation cell "Team Leader" gives a list of Team Leaders to choose from. This works perfect. Change the Department, you get a different list of names. The problem is that if I have both a Department and a Team Leader selected, and then I change the Department selection, it keeps the Team Leader cell filled with now invalid data (the Team Leader from the previous department). If I then click on the Team Leader cell, it has the correct names listed to choose from, but until I do that cell retains the old information. Is there any way to blank the "Team Leader" cell, or push data to it (I've included a Choose a Team Leader entry in my list of people), when I change my Department selection?
View 9 Replies
View Related
Jul 23, 2013
I just can't seem to get the syntax correct for setting or resetting a cell value using the OnTime schedule function.
It looks like the cell value changes randomly and after several cycles it just runs non-stop very, very quickly and I have to use the ESC key to break out of the loop.
Here is my code:
Code:
Sub RunOnTime()
dTime = Now + TimeValue("00:00:10")
Application.OnTime dTime, "RunOnTime"
If Cells(1, 4).Value
View 5 Replies
View Related
Mar 10, 2009
I am trying to build a spreadsheet that tallies hours worked and hours available for the next day. The key to this spreadsheet is the number 70. A worker can accumulate no more then 70 hours in an 8 day period, however after any day with no hours worked the rule resets to 70 hours available again. I have attached a sample spreadsheet so you can see how this should work.
View 9 Replies
View Related
Jan 19, 2007
Is there a way, either in Excel or using VBA, to reset xlLastCell without having to save the workbook?
View 4 Replies
View Related
Nov 19, 2009
I have 4 combo boxes with selectable options and several cells for inputting data into. I'm looking to create a reset button that returns combo box values back to the first one in the list and clears all cells at the same time. I've figured out the cell reset as follows;
View 3 Replies
View Related
Feb 2, 2009
I've found a # of threads on this subject but have been unable to find the function I need.
I've got a spreadsheet (attached) to calculate vacation time, but I can't figure out how to make the used time reset on an anniversay date. For example, if Employee 1 has earned 80 hours of vacation but only used 40 by his 4 year anniversary date, how do I make unused time roll back to 80 the day of his anniversary?
Here's the structure: 2 Personal days given Jan. 1, then 2 more on July 1 to employees here at least 6 months. Those whose 6 months fall after or between are awarded 2 days on their anniversary then accrue as normal. Unused personal days are lost at the end of the year. Vacation time is 40 hours after 1 year, 80 hours at 3 yrs, then 120 hours at 5+.
View 9 Replies
View Related
Aug 5, 2006
1. I created a "Top Category Data Dependent Validation List for sub-categories” in the attached spreadsheet. The selection from the Category drop-down list in column B, then drives or limits the choices in the Sub-category drop-down list in column C.
Credits: To achieve the above technique, I used the "Dependent List Validation" document as a technical reference.
the document is available from http://www.ozgrid.com/Excel/dependent-lists.htm
2. If the user updates the Category selection in Column B, then the value in the corresponding row in Column C should be "reset to a ( NULL/Clear) value," as to automatically prevent any human-error in forgetting to also update the Sub-category data in Column C.
(Optional Reading--the following steps are not related to steps 1 & 2 above, just notes regarding other data validation process created in this spreadsheet
3. I also created another column (D) that gets automatically populated with the Category ID,
based on the sub-category drop-down list selection in C.
4. Also in this spreadsheet, a macro checks for any "missing required data
before allowing the end-user to save this worksheet. As an example, In Column A, if there is a "RecordId" that exists in the same row, then the macro checks if the user has entered required values in Column B, C, "AND/OR" D. If the end-user did not enter any of the required values,
then an error message pops-up with this message:
"Cannot Save this file due to Missing Required Data. Please review highlighted record and complete missing data."
Credits:
Special thanks to:
-OzGrid Business Applications for writing code for a UDF (function that returns last word) that I used/modified a little bit to achieve Step 3.
-Carl (member name" carlmack") for his help in the methods I used in Step 4 above.
View 9 Replies
View Related
Apr 14, 2013
When cell A1 changes in Excel to 1 (fed via an external com process) I want another cell, A3, to display the value of cell A2 (also fed by an external program)
I need A3 to keep displaying the same value of A1 until A4 displays 'A' at which time A3 to start to monitor for changes to A1 again (A1 will now not display 0)
View 3 Replies
View Related
Jun 6, 2014
Cells B3 and B6 both have lists created through data validation.
If the value in B3 changes (by user selecting from the list), I'd like B6 to automatically change to "Select a take to retrieve" (which is the first choice in the B6 list.)
Likewise, if the value in B6 changes (by user selecting from the list), I'd like B3 to automatically change to "Select a version to take" (which is the first choice in the B3 list.)
View 1 Replies
View Related
Jun 5, 2006
I have a workbook with 20 worksheets the first is a summary called Discount Set the 19 sheets with various names
The 19 sheets in column H4:H40 u enter a number greater than 0 which is the quanty required. This is used to calculate a price on which ever row it is entered
the selection must only affect numbers as there are rows that are just shading and they contain no data .
So u could enter quanties on serval rows of different sheets to get a total price displayed in the Discount set
What I want to do is have button on the Discount Set which will clear any quantity that does not equal 0 back to 0 in column H which will reset the total 0.00
View 9 Replies
View Related
Sep 15, 2014
Reset Counter to Zero:
I have Record ID on Column A: Auto Increment
I have a vendor Name on Column B: Vendor 1, Vendor 2, Vendor 3
I have a Code on Column C, Code A, Code B
What I want to happen is the Counter to count +1 each time. it sees the same vendor, same code and only to count to 4. As soon as it counts to 4; the next counter should be 0 (Zero).
Col A Col B Col C Col D
======= ====== ===== =======
Record ID Vendor Code Counter
======= ====== ===== =======
1 Vendor 1 Code A 1
2 Vendor 1 Code A 2
3 Vendor 1 Code A 3
4 Vendor 2 Code B 1
5 Vendor 1 Code A 4
6 Vendor 1 Code A 0
8 Vendor 2 Code B 2
9 Vendor 2 Code B 3
10 Vendor 1 Code B 4
12 Vendor 1 Code A 1
13 Vendor 1 Code A 2
14 Vendor 1 Code A 3
15 Vendor 2 Code B 0
It can be either in VBA or formula...
View 2 Replies
View Related
Jan 15, 2009
Is there a way to take the values between C2 & D2 and have them automatically post in column F ?
View 2 Replies
View Related
Oct 24, 2008
is there anyway i can reset this to start at st001 ive got everything done but i need to reset the orders to start at st001
View 3 Replies
View Related
Jun 2, 2009
I know that a variable of string type is equal to "" before it's assigned a value. So I reset the value of strings to empty (i.e. "") when I want them clear of a value. I also know that variables of Variant Type are equal to NULL when they are unassigned so I reset them to NULL when I want to clear them of a value.
But what about a Long? When you declare a variable of Long Type or Int Type or Double Type, what is it's inital value when empty and unassigned. I assume it's not 0 since 0 is an actual number.
I want to reset my lng variable and clear it of a value. So I'm wondering what should I set to... How can i do this?
View 3 Replies
View Related
Oct 23, 2012
I have a textbox that pulls language using the following code:
Code:
Private Sub TextBox1_Enter()
TextBox1.Value = Sheets("Language").Range("B2").Value 'places the value of the cell into the textbox
[Code]....
Randomly and sporadically, when working in the textbox, the form seems to reset. By reset, I mean that the language resets to what was there originally.
View 1 Replies
View Related
Jan 18, 2014
In the below mentioned query, i want to reset the range according to the find result. Here the range I6 need to change with the active cell with a row down
Windows("Holiday Uploader Workings.xlsx").Activate
Cells.Find(What:=Reply, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
[Code]....
View 3 Replies
View Related
Apr 1, 2007
When I execute a macro, and if during the macro execution I press the "Esc" key, the execution stops and I get a Microsoft Visual Basic window with the message that code execution has been interrupted with buttons to Continue, End, Debug and Help. If I click the "End" button, the window closes and Excel is at rest - which seems to be some sort of Reset process.
I have a need to execute that process while Excel is at rest.
Is there any way to code the process in VBA?
View 9 Replies
View Related
Jun 20, 2006
I am not experienced at all with Excel, here is my problem: In column "A": I have 288 rows and has nothing but numbers in them. Row 1 is the lowest number, row 288 is the highest number. In each row the numbers typically increase; every once in a while the numbers may stay the same, but the number will never be lower. The numbers range from 0 through 600,000.
What I want to do is have column "B" follow column "A" until the cell total reaches 12000. The next cell in column "B" would then reset and start all over from "0". I want it to keep on reseting every 12000 counts. Another potential problem is that a majority of the time the cell value will not be an even 12000, 24000, 36000 etc. They may be more like A40: 11742 A41: 13201 etc.
View 5 Replies
View Related
Apr 20, 2010
My spreadsheet has 459 rows; however, the vertical scroll bar ends at row 569738. I have attempted to delete all of the extra rows by holding SHIFT and CTRL, striking the down arrow then right-clicking on the left margin of highlighted row numbers and choosing delete. I have also done the same procedure except clicking clear all from the editing menu. None of these methods has removed the rows and enlarged the vertical scroll bar to a proportionate size in relation to the number of rows.
View 14 Replies
View Related
Jan 16, 2014
How do I reset ALL the sorting in a file?
The first worksheet is all formula generated and has filters at the top, which I've variously sorted alphabetical. The second worksheet is raw data the user isn't intended to read.
Now I want to alter one of the formulas. The problem is, if I change it in row 2 and fill down I get all kinds of different information. This is because while the present formulas read
='other worksheet'!A265
='other worksheet'!A934
- and so on at random, when I resort them I just get A2, A3, and so on.
View 4 Replies
View Related
