Restrict Cell To Alphabet Only
Nov 28, 2009
for instance if i type in a particular cell any number 1, 0, 53 .. excel must not allow me to do this...
but there are certain value that have both number and alphatbets eg. 001 michael jordan ... cell should allow such values.
View 9 Replies
ADVERTISEMENT
Jan 18, 2014
I need a formula to verify whether a cell contains Alphabet or not.
View 5 Replies
View Related
Mar 15, 2013
I am trying to categorize a list of words based on the first letter.
For example:
[Code] ......
I want to see if the letter 'D' in 'Data' occurs in a range from A-G, if so display "A-G" in cell B,
else if the first letter occurs from H-M, display H-N in cell B
else if the first letter occurs from N-R, display N-R in cell B
else display S-Z in cell B.
View 2 Replies
View Related
Jan 22, 2013
I am working in both 2003 and 2007 Excel.
This is a simplified version of my worksheet:
I have two cells, A2 and B2. When I enter a numeric value into B2, I want it only allowed when certain text values are in A2. I.E.: Allow any value in B2, but only if A1 is either "SYDN or "ADEL".
Now using info found in an old post, I can achieve this with a combination of data validation and code:
=OR(A2="SYDN",A2="ADEL") for the validation and for the code:
[Code] ......
The only problem is I also need to reset B2 if A2 changes to invalid data as a result of some other input to that cell (A2). In other words if B2 is showing "1" already and A2 were to change from "SYDN" to say "LOND", then B2 needs to be cleared. If A2 changed to "ADEL" then it doesn't need to clear but it is ok if it does because it is fine to re-enter "1" into B2 again.
I have attempted to attach a sample worksheet : Xl0000003.xls
View 4 Replies
View Related
Dec 19, 2006
I have a range B1 to B4 for user to input value. Worksheet Change Event
However, the range B1 to B4 should not accept any value if the cell on the left hand side is empty.
Eg,
If A1 is empty, B1 should not accept any value.
If A2 is empty, B2 should not accept any value.
If A3 is empty, B3 should not accept any value.
Below code checks for condition in A1 only.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1:B4")) Is Nothing Then
If IsEmpty(Range("A1")) Then
MsgBox "Please input something under column A."
With Application
.EnableEvents = False
.Undo
.EnableEvents = True
End With
Target.Offset(0, -1).Select
Exit Sub
End If
End If
End Sub
Eg, If I enter something in A1, B2 would accept a value which is not what I hope to achieve. It should be checking for cell in A2 whther it is empty.
Would be grateful for some advice on how to modify the code.
I attached a sample file for reference
View 7 Replies
View Related
Jan 29, 2008
I have two coloumns on a worksheet. In the first column I have data validation drop down list. I want to be able to: if the first column "Other" is chosen then the next cell will allow text for description, if anything other is chosen in the first drop down list cell then I want the next ( text for descritption ) cell to be resticted.
View 4 Replies
View Related
Mar 13, 2008
I am trying to do with data validation, trying to stay away from vba on this... and it is probably very simple:
Cell A1, they can select Rice, Cheese, or Rabbit
I want to use custom data validation on B1, so that if A1 = Rabbit, they can only enter 1. If it is blank or the other two choices, they can enter 1 through 10.
Can I do that with data validation? I can't get any if thens to work in it.
View 3 Replies
View Related
May 14, 2014
I need a formula that I can put into a cell, I assume via data validation, and will prevent the use of any symbols other than a hyphen "-". Spaces are fine. The cell is being used to enter the 1st line of an address.
View 14 Replies
View Related
Jan 28, 2009
I am trying to come up with an excel shee which can track the progress of a student on practice exams. This exam only has multiple choice questions, with answer choices A,B,C,D or E.
What I am looking for
1) I want to restrict the cell data to A,B,C,D or E (both cases). Note that I am not looking for a drop down/combo box. It would take the user to use one or two mouse clicks to drop down the list, and I am not in favor of that.
2) I would like this validation/formula to be applied to all the cells in a particular column.
3) Nice-to-have.
If the user enters a lower case letter, then I would like to convert to upper case.
View 8 Replies
View Related
Sep 17, 2012
I have a cell (A1) with a number in it. The number has 30 digits. I need a formula for (B1) that will enter the same number as A1 but restrict the number to 28 digits. Basically I need it to cut off the last 2 digits.
View 3 Replies
View Related
Jun 6, 2014
I have cell E15 in Sheet1 which will take an 8 digit Personnel Number, which can have leading 0's. I want to prevent a user from entering any characters other than 0123456789. I have worked out that I need to use the Worksheet_Change event and I need to use the function IsNumeric.
No matter what I do I can't trigger the Worksheet_Change event!
View 4 Replies
View Related
Nov 29, 2006
a value in a cell depending on some condition.
In the attached sample file, when A2=Fruit, A9=Domestic, A10=Orange and A11=1, B2 would not accept a value greater than 200 and there is a pop up message.
This control check works fine if a user has input "Fruit" in A2 first and input amount in B2 later.
However, if the user has input value 250 in B2 first and input "Fruit" in A2 later, 250 would be accepted by B2 and there is no pop up message.
View 9 Replies
View Related
Jan 11, 2007
I am running the following code to check if a value = 0 is in specific cells. Because this code on all the cells runs each time any cell in the workbook is calculated, the screen flashes. I would like to stop this screen flashing by having the check done only when the specific cells are exited....
View 9 Replies
View Related
Jun 5, 2007
Is there a way to limit say a value to be inputted into a cell say between 1 and 10, and to have a warning message pop up if any other values are keyed into that particular cell?
View 3 Replies
View Related
Jan 28, 2013
I have two cells, A1 = Yes/No and B1 = Date. I want to restrict someone inputting a date into B1 until A1 is marked as Yes...? I've tried data validation, but seem to be hitting a wall with it...
View 2 Replies
View Related
Jan 23, 2008
The 'gist' of what I need is for events scheduled (top of spreadsheet), no school can be placed into an event within 29 minutes (because one-half hour apart IS ok). The time increments are on the left side of the spreadsheet (rows). I'm trying to "automate" somehow so that if we try to plug a school into an event too soon from their last event, the spreadsheet won't allow it.
View 2 Replies
View Related
Jul 27, 2009
I've written a spreadsheet and am wondering if there is a way to permit data entry in a cell, contingent upon another cell being populated.
In simple terms, you can't enter data in cell X, until cell "Y" has been populated with something.
View 14 Replies
View Related
Sep 18, 2007
I am looking for a forumla, which I think will be an If forumla, to allow/block entry into a cell depending on what is entered in another cell.
So if "Yes" is entered into cell 1, I want cell 2 to show "N/A", and if "No" is entered in cell 1 I want the user to be able to enter data into cell 2.
View 3 Replies
View Related
Nov 27, 2013
I want to restrict user from entering alphabets like I,O,Q and S in a cell. Can we do this using data validation or any formula because I don't wan't to use drop-down list or refer to values in other cells either.
View 3 Replies
View Related
Apr 3, 2012
I am using the below code to enter the data in Cell "D" & "E" of the worksheet.
Dim a, b As Integer
a = WorksheetFunction.CountA(Sheet2.Range("C:C"))
ActiveWorkbook.Sheets("Retailing Data Sheet").Activate
'If Range("C" & a + 1).Value "" Then
[Code] .......
But, If someone wants to enter the data manually into the Cell "D" & "E" its allowing which i dont want.
It should be enter by using the form only...
View 5 Replies
View Related
Apr 14, 2009
I'm am trying to restrict the length of data that can be entered into a cell based on a drop down in that row. I have achieved this, but what I need to be able to do is use data validation to restrict the cell length to one of two values - so for example the length can only be 6 OR 9 characters long.
I cant see how to do this. At present the best I can do is rectrict to between 6 and 9 - but this would allow 7 and 8 which is not allowed.
View 3 Replies
View Related
Jul 22, 2007
I know there must be some way to write vba to force users of an excel sheet to choose from a drop-down list for that particular cell. I am having trouble with a spreadsheet that is used widely through the company with people doing copy/paste or just typing in entries.
View 2 Replies
View Related
Sep 9, 2007
I'm trying to create a sheet where clicking in a range brings up, in my users words, "a box I can type loads of comments in". They want some kind of flag in this cell showing if comments are posted or not. So far so ok, got the userform to pop up using the selection change event below and dump the actual comments somewhere the user won't look. A rather inelegant IF statement to see if there's anything in the dump cell gives them their flag.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Intersect(Target, Range("B2:B300")) Is Nothing Then Exit Sub
UserForm1.TextBox1.Value = ActiveCell.Offset(0, 10).Value
UserForm1.show
End Sub
So what's the problem? When I select entire rows, the userform pops up. Is this unavoidable?
View 2 Replies
View Related
Apr 2, 2008
I am trying to use excel to score a test. I want to tick a cell to do so. There is an excellente information about Tick Cell Upon Selection, posted here http://www.ozgrid.com/VBA/excel-checkbox-tick-cell.htm. Its range is limited to (A1:A100)
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A1:A100")) Is Nothing Then
Target.Font.Name = "Marlett"
If Target = vbNullString Then
Target = "a"
Else
Target = vbNullString
End If
End If
End Sub
How can I increase the range so it would target C1:C30, E1:E30 ( total of 17 columns)?.
View 3 Replies
View Related
Oct 2, 2012
I'm using Excel 2010, and I need to restrict the value the user can enter into a cell (E9).
In cell E3 is the screen width (pixels). eg 6024
In cell E5 is the preferred width of a window. eg 450
The user, in cell E9, enters an x coordinate for which they prefer the top left corner of the window whose width is specified in E5.
If the value that the user enters in E9, added to the width entered in E5, exceeds the value of E3, (if E9+E5 > E3) then the value should be disregarded (window will be off right of screen) and the user re-enter.
I'm not familiar with the use of data validation, so I'm uncertain as to how to use it in this circumstance.
View 3 Replies
View Related
Nov 23, 2009
I've found a few threads, but I'm not finding my answer. I need to start with AA in L2 and Fill down until Column I is "".
View 2 Replies
View Related
Apr 29, 2009
i am a having a text in 5th column. now i want to know the alphabet corresponding to the column i.e E (for 5th column)in my code
View 9 Replies
View Related
Dec 4, 2013
If I have value "H" in cell C1, how would i have "I" in cell C2 and "J" in cell C3.
FYI : next 2 alphabet after "H".
View 7 Replies
View Related
Aug 5, 2014
I export data to Excel and now I have date like
05-08-14
06-08-14
70-08-14
If I change the Date format to AUG-14 and than pivot it than its coming in tree column which I need only 1 for whole month
View 4 Replies
View Related
Oct 22, 2009
Col A has a list, mixture of letters and numbers. By default excel sorts the numbers in order and then the letters. How do I display the letters A-Z first and then the numbers?!
View 4 Replies
View Related