Restrict Change Event To Specified Rows
Jul 28, 2006
I have a question on how to define fixed rows on making cell blank on new selection change.
The code below affects all rows under coloumn 1.
Is there any way to affect only eg row 1 to 20?
I attached a sample file for reference.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim strName As String
If Target.Cells.Count > 1 Then Exit Sub
On Error Resume Next
strName = Target.Name.Name
On Error Goto 0
If ActiveCell.Column = 1 Then
Application.EnableEvents = False
ActiveCell.Offset(, 1).Value = vbNullString
Application.EnableEvents = True
End If
End Sub
View 9 Replies
ADVERTISEMENT
Jun 21, 2007
Long time since i've needed the expertise in this magnificent forum. I Have a problem with the ChangeEvent procedure. I have defined a range of two colums as can be seen in the posted code sample, but the Change Event procedure runs the procedures if ANY cells in the sheet is changed. How do I limit the Change Event to only the two colums that I have specified?
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Range("L6:M1000") Is Nothing Then Exit Sub
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
On Error Goto 0
If Not Intersect(Target, Range("L6:M1000")) Is Nothing Then
If Target.Value = 1 Then
Target.Offset(0, 1) = "5) Gennemført"
End If
If Target.Value = "5) Gennemført" Then
Target.Activate
With ActiveCell
.EntireRow.Select
Selection.Font.Color = RGB(196, 196, 196)
End With
ActiveCell.Offset(0, 11).Select
End If
End If
UpdateColorDeadline
Target.Select
End Sub
View 3 Replies
View Related
Aug 4, 2006
I have this code working fine. It applies conditional formating to two rows ((K3:K65) and (J3:J65)) and checks when a value changes in row B to reaplpy the formatting. I'd like to had add more columns to it. It would have apply the same conditonal formatting on rows ((O3:O65) and (P3:P65)) but when a value changes in row (N3:N65)
So basically, I want to keep the first working part of the code and have it to check at more rows with a different reference for the conditionnal formatting.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
Dim rngJ As Range
If Target.Count > 1 Then Exit Sub
Set rng = Union(Range("B3:B65"), Range("J3:J65"))
If Intersect(Target, rng) Is Nothing Then Exit Sub
Set rngJ = Range("K" & Target.Row)
Select Case rngJ.Value
Case ""
rngJ.Interior.ColorIndex = xlNone
rngJ.Offset(0, -1).Interior.ColorIndex = xlNone
Case Is >= 20.............................
View 2 Replies
View Related
Aug 29, 2006
I am trying to make a macro run automatically based on info entered in a cell. The problem is I need this code on at least three separate sheets in the work book. It doesent work when I try to use the same basic code. The code I am using is below.
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim lLastRow As Long
Dim rgArea As Range, rgCell As Range
Dim COL_B As Integer
COL_B = 2
Dim COL_X As Integer
COL_X = 24
Dim ROW_FIRST As Long
ROW_FIRST = 5
' Find the last row of date in the "Approved" worksheet
lLastRow = FindLastRow(SZ_WS_APPROVED, COL_B)
' Set a reference to the changed cells in column X
Set Target = Intersect(Target, Range(Cells(ROW_FIRST, COL_X), Cells(lLastRow, COL_X))).........................
View 5 Replies
View Related
May 10, 2006
is it possible to have a userform activated as a result of a Worksheet_Change event on more than 2 cells. Currently I have the code below which will activate userforms if either a cell in Column G or a cell in Column T is changed.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Intersect(Target, Range("G:G", "T:T")) Is Nothing Then Exit Sub
If Intersect(Target, Range("G:G", "T:T")) = "" Then Exit Sub
If Not Intersect(Target, Range("G:G")) Is Nothing Then
GlngRow = Target.Row
Call Module3.ShowList1
End If
If Not Intersect(Target, Range("T:T")) Is Nothing Then
GlngRow = Target.Row
Call Module3.showlist4
End If
End Sub
What i need to do is activate another userform if a cell in Column AC is changed. I tried this code but got an error "Compile Error: Wrong number of arguments or invalid property assignment", which leads me to believe I can't add any more cells to the argument and it highlights the word Range in this line - If Intersect(Target, Range("G:G", "T:T", "AC:AC")) Is Nothing Then Exit Sub..........
View 6 Replies
View Related
Sep 9, 2007
I'm trying to create a sheet where clicking in a range brings up, in my users words, "a box I can type loads of comments in". They want some kind of flag in this cell showing if comments are posted or not. So far so ok, got the userform to pop up using the selection change event below and dump the actual comments somewhere the user won't look. A rather inelegant IF statement to see if there's anything in the dump cell gives them their flag.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Intersect(Target, Range("B2:B300")) Is Nothing Then Exit Sub
UserForm1.TextBox1.Value = ActiveCell.Offset(0, 10).Value
UserForm1.show
End Sub
So what's the problem? When I select entire rows, the userform pops up. Is this unavoidable?
View 2 Replies
View Related
Nov 20, 2007
Can you have more than 1 worksheet change event on the same worksheet, if so, how do you name it to prevent the ambiguous name error. What code would I need to select a text value in colums e11:e15 based on the cell value in cell named STATE and place the selected value in cell e16. I have, thanks to this resource, one worksheet change event that selects a numeric value from any column E3,F3:F7 and places that value in cell C4. but the same code doesn't work for the new worksheet change event.
View 4 Replies
View Related
Jan 11, 2007
I am running the following code to check if a value = 0 is in specific cells. Because this code on all the cells runs each time any cell in the workbook is calculated, the screen flashes. I would like to stop this screen flashing by having the check done only when the specific cells are exited....
View 9 Replies
View Related
May 13, 2009
I want to show which rows of data have been changed by incrementing a revision attribute. For example, if a user changes the contents of a cell anywhere between rows 2 and 13 and col 1 and 9 then the revision attribute in col 10 would increment from 1 to 2 (for the affected row). If another change affects the same row then the rev attribute would increment to 3, and so forth. I don't care which cell was changed only that something on that row was touched.
I thought the CHANGE event was a dead ringer for triggering some VBA code to control this but, since part of the change event code writes the revision value, this triggers another CHANGE event causing an endless loop until something (??) kicks in and stops it after 220 iterations. Is there a way to inhibit the change event just prior to updating the cell containing the version attribute?
Rather than post the code here I have submitted the workbook that includes the whole setup and code. I should also mention I looked at all the other worksheet events and I do not see any "triggers" that would fire each time a cell content is changed. As a side note, is there a way to step into the code of a change event? F8 does nothing.
View 3 Replies
View Related
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
Aug 7, 2006
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
View 9 Replies
View Related
Jun 17, 2009
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies
View Related
Jul 21, 2009
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
View 4 Replies
View Related
Dec 6, 2011
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
View 5 Replies
View Related
Jul 21, 2009
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
View 9 Replies
View Related
Sep 27, 2007
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
View 2 Replies
View Related
Jan 29, 2007
I want to restrict the adding the rows and columns and also deletion of rows and columns in excel template, the same template is circulated to all the program owners to capture there project metrics. With that template through macro values are extracting to consolidated report. Some times program owners are adding extra columns/rows with that we are getting errors/incorrect reports.
View 14 Replies
View Related
Oct 29, 2007
how do I restrict editing to certain columns/Rows and allow some to be edited by users?
View 2 Replies
View Related
Apr 19, 2009
I have a user input box (VBA) with two columns of data entry. The leftmost column has text boxes labeled color1, color2, color3, etc.. The rightmost column has text boxes labeled tag1, tag2, tag3, etc..
I have the TAB sequence set to go from color1 to tag1, color2 to tag2, color3to tag3, etc..
A user can inadvertently tab over the color1 (or color2, etc. columns) into the tag1 (or tag 2, etc. columns) column without entering data in the color column.
Is there coding to allow a TAB key entry to be a Change Event such that, if a user TABS out of color1 without entering data, a MsgBox could signal that they must enter data in the color1 field before they can continue?
Alternately, can you suggest a different approach? The goal is to require an entry in the leftmost column (color1) before they can proceed to the tag1 field. Of course, they are given a "Cancel" option.
View 7 Replies
View Related
Feb 7, 2014
I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.
[Code] .....
View 2 Replies
View Related
Feb 26, 2014
I have a chart with 2 Y axis. I am attempting to write some code that will update both axis with the same max & min value that is triggered by the combobox selection. The code will update the axis but is not triggered by the combobox selection.
[Code] ...........
View 6 Replies
View Related
Apr 30, 2009
Cells in Column M have a data validation drop-down list. If the user selects 'Closed', I want this code to run:
View 12 Replies
View Related
Aug 15, 2009
I want to know if it is possible to have 2 workshhet change events for one sheet. Let me explain this. Presently I have one workshhet where if any value ie entered in column A automatically date and time is entered in column B. I can do this by using folloing code.
View 5 Replies
View Related
Sep 29, 2009
I've been searching all over and can not figure this out as from my limited knowledge it should work. I have two sheets (A & B) and on Sheet A an employee inputs a job number into column B and what I then want to happen is have column D populate automatically with the clients address. This client address is located in Sheet B. I figured the best way to do this was to use a combination of the 'Change Event' method and VLookup utilising a bit of VBA, but I just cant get it to work - I keep getting a #Name? error.
View 5 Replies
View Related
Jun 7, 2007
In a Worksheet On Change event I am trying to obtain a new value that the user has placed into a particular cell.
However, when I get to the line of code that reads the value in that particular cell, it is pulling the value that was in the cell prior to the change. When I view the sheet I can see the new value. When I do a debug.print or ? in the Immediate Window it shows the prior value.
View 9 Replies
View Related
Apr 17, 2009
Dim bfr As Long
bfr = ComboBox1.Value
ComboBox1.Value = bfr: Exit Sub
how come this gives me a "cant change property" error!?
The code is inside my combobox change event...
View 9 Replies
View Related
May 28, 2009
trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 15 And Target.Column = 10 Then
Call time_start
Else
End If
End Sub
However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.
If the word "Completed" is deleted, I want the date on that row to be deleted.
I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.
View 9 Replies
View Related
Dec 9, 2009
I was wondering what I can add so this will not error when I delete the contents of the target range,
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Not Intersect(Target, Range("C11:C29, E11:E29")) Is Nothing Then
If Target.Cells.CountLarge > 2 Then Exit Sub
Application.EnableEvents = False
Target.Value = UCase(Target)
end sub
View 9 Replies
View Related
Jan 20, 2010
I have a userform with a text box.
The text box has a change event associated with it Depending on the circumstance I want to disable the change event for this textbox.
I have tried application enabled /disabled but this is only for work sheets
I have tried the following with no avail Public mbEvents As Boolean 'added this in so all the modules can accsess it
mbEvents = False
If mbEvents = False Then Exit Sub
do my code here
mbEvents=true
View 9 Replies
View Related
Sep 13, 2007
I have a macro which makes an renames a new sheet for me using a button, how can I copy macros currently found in only one sheet to this new sheet? Mainly used in formating and formula display.
View 5 Replies
View Related
