I have a sheet where I am setting up formulas to average numbers that I will input in the future. So basically I am averaging empty cells. right now it returns the error #div/0!. I would like it to return 0 until I input numbers in that range for it to average. Is there an if statement or something else that can do this for me?
View 2 RepliesHi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View RelatedI have this formula =INDIRECT(ADDRESS($GS1,COLUMN()))
and when a cell is empty this formula return a 0 but I would like it to return also an empty cell because in my data the 0 count for a value.
Then I have this one : =COUNTIF($ML641:$NA641,$ML653)
I would like to do the same thing to not return a 0 if the cell is empty but an empty cell. I hope I explain it right ?
I have a problem with finding the right function. My goal is to have the following function...
The cell D1 has the following function: [=IF(B1<=C1;"YES";"NO")] But I would like to have the cell D1 to be left blank, if the cell A1 is blank.
I don't know if this is best in a formula or macro but what I am trying to do is create a list of data with no empty cells from a list of data with empty cells.
What I want to say is if A1 is blank move to A2, if it's not return the value in A1 to B1. If A1 and A2 are blank then return the value in A3 to B1 and so on. Generally it's a sort function but I want it to happen automatcially and lkeep all my values in the original order
Original Version:
Date 1/4 Value 1/4
23/02/199913.506
5/05/199911.901
14/05/199912.152
24/05/199911.607
7/06/199911.187
29/07/199911.828
2/09/199910.473
6/09/199910.429
Desired outcome:
Date 1/4 Value 1/4
23/02/199913.506
5/05/199911.901
14/05/199912.152
24/05/199911.607
7/06/199911.187
29/07/199911.828
2/09/199910.473
6/09/199910.429
find out the last blanck cell in the row. ex: 1 2 0 5 6 0 0 5 0 zero it means blanck i prefer using fx function but i can use also Macro
View 6 Replies View RelatedI am plotting a chart using data from custom functions. On occasion, the formulas return erratic values (due to the underlying data) which I wish to exclude from the chart. If the function does not pick up a value in the code, by default it returns a zero.I would like when this happens to have my function return nothing instead of a value - and I mean absolutely nothing, not a blank string. in this way, the chart line will totally ignore this point.
View 6 Replies View RelatedI am using the MONTH function in a formula. The Month value of an empty cell is returned as "1". Why is this? Is there any way to return a null value or zero?
View 6 Replies View RelatedHow can I do an average in Excel 2003 when it's not a range but I also don't want to count a certain cell when there's no data or zero? I have attached the spreadsheet.
View 6 Replies View RelatedHere find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI'm trying to average data for the past 3 years. My spreadsheet is setup like this.
Year, NameID, Salary, Average Salary
I have the spreadsheet sorted by NameID so most people in the database will have 3 entries right after another. How do I determine an average salary for the person across all 3 years?
I need the average salary to display across from the most recent date if that is possible as well i.e. if the latest salary date is from 2006, I would prefer that is entered into the row corresponding to 2006 and leave the 2004/2005 rows blank.
Also, some people might only have 2 years of data so keep that in mind as well.
Column A has approximately 50,000 rows with unique property parcel numbers. Column B has numbers that represent an elevation point on the parcel. The parcels are not level. The elevation of a parcel varies depending where one measures. So,...I have many rows with the same parcel number in column A but the adjacent column B shows a different elevation. Is there any way to:
1) remove all of the duplicate column A parcel number rows so I have just one column A parcel number row.
2) get the average of all the column B elevations to show up on the same one row?
I should only have approximately 15,000 rows if I could get rid of the duplicates and get the average elevation. I have version 2007 but I have to share with others who have version 2003. I don't know if that makes a difference but I thought I should mention it
I have received a task to do for school and I tried my heart out but I can't seem to figure this out. It's really simple but I can't seem to do it... I'm not very good with excel.
The excel file is attached .....
I have a spread sheet and it has a column in it with a drop down menu. The words in the menu are Hot, Medium and Cold. I want to have it tell me which one if showing up the most.
View 13 Replies View RelatedThe organisation I wish to report on has many cost centres which each contain many people. These people are on many different grades, and each are on differing salaries (even those in the same grade).
One “reporting group” has many cost centres.
There are several reporting groups.
I need to report on average salary per grade / per reporting group.
I have attached some dummy data. The “rep group” tab displays the reporting groups and the cost centre mappings (ie reporting group England contains cost centres 1, 2, 3, 4, 5, 6 and 7). Note in reality the cost centres are not this simple, they are 6 digits and varying ranges.
In the “salaries” sheet each individual is listed along with their cost centre (in column c) and their grade (column d). Their salary is shown in E.
I have a column of data in Excel in the [h].mm.ss format. These values range from a few minutes to hundreds of hours. I need to get the average of these times.
My code is below. I'm getting a type mismatch error on the line that tries to add the time to the total. The line is in red. I've tried using a Integer, Long, Double, and Date as variable types for this particular variable. All with the same result.
I am attempting to find the average units of the last "n" weeks. I wish to input the required number of weeks in cell D20 which will show the average in cell D22. In this particular example, I have manually calculated using the average formula....
View 9 Replies View RelatedI need some help with a formula. I've tried daverage, cant seem to get it to work. below is an example of the spreadsheet.
A B C D E
Date Name Project Score Pass?
5/1 Joe Test 55% No
5/1 Jan Quiz 88% Yes
5/4 Jon Test 100% Yes
5/9 Gary Test 75% Yes
5/11 Joe Quiz 90% Yes
5/18 Mary Test 45% No
Ok, I need a formula that I can execute from a different worksheet than the data is on. I need the formula to give me the average of the scores in column D for the criteria in Column C "Test". I tried daverage=(A1:E7, "Project", C1:C2) I cant get it to work. Do you guys know any other way to do this?
in Sheet1, i have 'part number' listed in column A and 'customer number' in column H. in column P, i have 'customer price' (for that part). so there are multiples of the same part numbers listed in column A.
in Sheet2, i have a summary showing totals for the parts (regardless of the customer), which includes SUMIFs for other columns such as pieces sold, etc. what i am looking to do is get the 'customer price' average by part (in column P/worksheet1) for each part on Sheet2.
Sheet1 sample:
Column A / Column H / Column P
31397 / 1001240 / $6.60
31397 / 1020312 / $6.65
31397 / 40020 / $6.63
31832 / 1047493 / $4.22
31832 / 1035195 / $4.22
31832 / 40017 / $4.40
So for Sheet2 i would like it to be like:
Column A / Column B
31397 / $6.6267
31832 / $4.28
i also need this formula to work if column P has any cells with zero entered.
I'm making up a list of average scores across a season. I have an average column and I need to be able to deduct 10% from this average, then have excel ignore any scores below this new number and make up a new average (kinda like a handicap score).
I have columns for average (BD), 10% of this (BE) "ignore any score lower than"(BF) but Im not sure how to get excel to add up only the scores below the number in BF and make a new average column of only these in BG -
Last column would be to give each person a classification based on cutoffs (for instance 1-10=C Class, 11-20=B Class, 21-30=A Class etc etc). Is there a way to make "if BF=xxxx, make BH A, B, C etc?
I need to average out a set of numbers but the amount of numbers inputed will vary, these number can also be either positive numbers or negative numbers but will never be 0.
How do i do this and I would like this in formula terms?
Say cells a3,b3,c3 were the numbers that I want averaged but there is not always a number inputted in each of these cells. I want the answer to show up in cell a4
i've got a worksheet with 3 columns each declared, called date, place and avspeed
I'm trying to average the avspeed if it falls under certain criteria within the other 2 columns.
The dates are in day format and basically I require the average over the week
If tried using
=AVERAGE(IF(WEEKNUM(date)=45,IF(local=I4,avspeed)))
also declaring it as an array formula but both
also tried the following by summing and then counting the data and dividing one by the other, but so far neither are working
Trying to compute annual change I've always used the formula "(b1-a1)/a1" - where b1 is the current year, a1 is the prior year. I've been asked to compute average annual change over a number of years and thought simply by using the above for each year and then taking the average of all these, I'd be ok. I recently found a formula as follows: "(y2/y1)^(1/n)-1", where y2 is current year, y1 is 1st year I have data, n = the number of changes.
View 7 Replies View RelatedI have a spreadsheet,3 columns are shown in the attached.The first column gives the date of the event,the second column the time and the third a rating.I want to put the average rating for each event in each cell in column 4.
View 9 Replies View RelatedIs it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?