I'm trying to return the cell address of an lookup. The lookup result is correct, but when I try use the below Address function, it just returns the text value (i.e., the formula itself) instead of the cell address. Below is the an example of each: ...
View 4 Replies
I have a range of cells (C29:BB29) containing zeros and integers, I want to lookup the smallest non-zero value from that range in another range (C11:BB11) and return the cell address from C11:BB11 to use in a further SUM formula.
Is that possible?
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
How to return address of the column or cell I selected from Application.Inputbox, not just return the value?
[Code] ....
I have a range of lookup values I want to use to return the "Cell Reference" of the matching value in another vector (single column).
Is there a simple function that will do this..?
eg a variation of using VLOOKUP
Is it possible to get the location of the result cell of a lookup result. For example, instead of showing the cell value it shows the cell address of the results of a lookup. You see I have this Summary Report of a payroll system. Everyone doesn't need to pay social charges, except two people, "person1" and "person2". What I want to do is to first look at the names in the report to see if one of those people are listed in the summary(this can be done by lookup, I think). Then go to a different column on the same row as the person. So, for example, "person1" is in a14, then the macro will select the cell say... g14.
View 6 Replies View RelatedI want to be able to display the location of a specific cell no matter if I move it around by inserting cells above it. I've used =ADDRESS(41,2,1,TRUE,B41). Cell B41 contains the word "Tommy". So the result of this formula returns this: Tommy!$B$41. But now if I insert a row above cell B41, "Tommy" moves to cell B42 but the formula still returns: Tommy!$B$41. How can I get the formula to display the new cell address of "Tommy"?
View 8 Replies View RelatedI have two columns of numbers in column A & B. In column A I am trying to locate the maximum value and get the cell address of the number next to it in column B. I am currently using this formula to do this ..... =ADDRESS(MATCH(MAX(A1:A4),A1:A4),2,4)
It works ok, but if the maximum number is the first value in the column it is returning the last cell address in column B. I am not sure what I am doing wrong.
construct a formula that finds a value in a range , then returns the cell address of that value.
Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.
I have tried the address & match function but gives me an N/A error.
i'm looking to return the cell address of the max number in a given range?
View 3 Replies View Relatedwhen I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?
so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng
set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious)
ok so say it picks up..... cell A69... how do i get it to save range A69
The format for the sheet is set in stone and can't change, and therefore my macro's operate on set columns / rows amd cells.
Because the sheet is huge, im trying to figure out a way to only run the macro's that need to run and more specfically on the changed location.
The Question
I need to create a routine that on the user changing a cell, it returns the cell position (row,column), then it will call a routine i have already which decides based on the cell location, which macro to run and where.
Is there a way to get the vlookup function to return the cell address, rather than the value, of the lookup?
View 9 Replies View RelatedI have a list of ID's on one sheet that are also located in a large matrix on another sheet.
This macro uses the Find_Range function to find each ID within the matrix and return the column header where the ID was first located.
There is also a line which return a list of ranges, indicating all the places where the ID was found.
What I want is to convert the list of ranges into a list of corresponding column headers (ie row 1 of all columns in the range)
' Number of id's in list
RowCnt = Application.WorksheetFunction. CountA(Columns("A"))
For I = 2 To RowCnt
LookFor = Sheets("ID List").Range("A" & I)
Set InRng = Sheets("Matrix").Cells
Set Found = Find_Range(LookFor, InRng, xlValues, xlWhole)
On Error Resume Next ' If value is not found
Sheets("RateID Count").Range("C" & I) = Sheets("Matrix") _
.Cells(1, Range(Found.Address).Column) ' Return column header
Sheets("ID List").Range("D" & I) = Found.Address(False, False) ' Return cell address or range of addresses
On Error Goto 0
Next I
Here is a sample of database,
A
1
Jan-12
2
Feb-12
3
Mar-12
4
Apr-12
5
May-12
6
Jun-12
7
Jul-12
8
Aug-12
9
Sep-12
10
Oct-12
11
Nov-12
12
Dec-12
If i lookup a value in the range A1:A12, say Sep-12, i need to get the cell address instead of the value of the row. but i know how to get cell address using CELL function. but i need to get cell address when i lookup the value.because lookup value will be dynamic.
Is there any formula to find text and return its cell address? This is like when we use Ctrl+F function to find a text, and Excel then highlight the cell contains the referred text. At the same time, the name-bar displays the address of the cell. Now, is there any formula that can perform such task like this?
View 9 Replies View RelatedHow would I return a cell reference (address) to a cell that contains the largest number in a list?
I tried using "Address(large....) where I get the correct column, but the returned row # is the actual value in the cell (the highest # in the list).
I eventually will want to delete the highest number to leave the cell blank.
i have a little problem regarding look/ find/search procedure.
i dont know what exactly the term of this.
anyway i have attached an .xls file for your perusal.
problem:
- i want to search a value in a certain table and the return would be the value of index cell.
I understand how to set up a normal VLOOKUP, but I am not sure how to do the following: I am trying to set up a sheet that will find the last cell of a row containing "yes" and display the value of the cell at the top of that particular "yes" column. Maybe VLOOKUP is not the answer? I have attached an example of what i am trying to do.
View 5 Replies View RelatedI have a XL work book with different worksheets what i need to do is compare cell a2 and e2 of worksheet 1 with all the data on sheet 2 and then return the data from the same row but in column m I dont know if this makes sense but it pretty much is the same as a VLookup but comparing 2 cells instead of one
View 9 Replies View RelatedI am looking for a way to construct a dynamic message box such that when a user right clicks on a cell, the macro will check the contents (a numeric code) of that cell against an existing table on another worksheet. This table would contain the codes and a text message specific to each code; the macro would insert the text message aligned with that code into a message box on the original worksheet.
View 3 Replies View RelatedI am wanting to use a vlookup or perhaps an array(?) to bring through multiple cell values based on being the maximum value. So say there are multiple employees (all with unique ids) under one manager (also with unique ID), I want to find the employee with the highest value in a particular column and return that employees details, such as name, employee number and the value itself, which are all in the same row. I have attached a basic example of the data involved.
View 8 Replies View RelatedMy task is that I have several documents exported in excel. The requirements in them were mapped to another document. The IDs were populated in a certain column but are now no longer needed. I have to convert those old Ids to the current ones. In my example I have populated Sheet one with the lookup table. In column A are the old IDs. In Column B are the new ones they map to. The old ones can map to several which is why there are more than one ID in some of the cells. In column D of Sheet 2 I have populated it with the old Ids. In Column A I'd like to have the lookup return the appropriate maps to the new Ids. For example for the first map in cell A2 it should return:
abc_18
abc_43
abc_6
abc_4
all in one cell.
Vlookup can return the first hit (abc_18 and abc_43 for cell D2), but ignores the other two IDs in cell D2. I was able to work around this combining the find, mid, and vlookup to return all values. The problem with that is that the formula gets monstrously big after just having it return 4. In the actual files it can be up to 30 IDs which would make that formula literally pages long since. I have pretty much no experience with macros, but it seems like the only solution since I have to send this off to various people so they can use it.
The main worksheet in my workbook contains lists of suppliers with unique Vendor Numbers, of which there are approximately 4,500 rows. There is another worksheet which holds approximately 6,500 entries I need to bring data from that sheet to the main sheet using the Vendor Number and the information that is held on 4 columns unique to that number.
The information is a classification system that comprises of 4 columns holding a mixture of numbers and text.
Worksheet 1 has the Vendor Number in Column A and the Classification destination starting in Columns Q, R, S & T.
Worksheet 2 once again has the Vender Number in Column A, and the Classification information in Columns C, D, E & F.
What I need guidance on is how to build the formula to copy the information across, or direction into what other method I should be looking at instead.
I have data inputted into cells a-o in rows 1-250. I want to search, lets say row 1, (I do want to search all 250 rows if that info is relevant!) and if cell m is blank then I want to return all the info from row 1 into row 260. If there IS data in cell m then I want to return nothing. Bottom line I want to return all the data in all the rows that contains nothing in cell m.
View 3 Replies View RelatedAt work I have a spread sheet that I used to track material shortages by part number. So in column A of the spread sheet there is a list of part numbers that have shortages, column E contains a list of all sales orders that are affected by the shortage separated by a comma. I am trying to setup a query sheet where I input a sales order and get back a list of parts that are short for that sales order(basically reversing the original list to be by sales order instead of part number). The number of values in column E varies, sometimes a cell will have 1 value, sometimes 20+ and anywhere in between.
Example Sheet:
A
B
C
D
E
123
012
234
789, 567
465
789
890
012
I'm already got a INDEX/MATCH that would show both shortages for sales order 012. But I can not figure out how to get the shortages for 789 or 567.
I have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
I have a table that has a number of new starters and corresponding appointments offered, what I originally required was to lookup the chronological date after the new start date.
However this has now been scuppered by my boss who has requested that not only lookup the date, but also add who the appointment is with, but if I do this the first array formula stops working and to tell the trust I'm not to sure how to do it anyway.
i just want to use vlookup and hlookup to give me the row and column headings for 30 to 40 sesor at a time.... but i keep getting #n/a whenever the functions meet a table of more than one column! (reduced workbook attached)
it should surely be simple to get this data - but i've struggled to no avail. I thought that having the four separate worksheets was the problem - but i haven't had any look even when i dump the data into a single worksheet!
i basically just want excel to return the cell reference of a sensor number which exists in a table. sometimes a sensor can appear more than once, but its not very common and i could happily work around that by doing the manual search (ctrl f, find all).
any advice would be very much appreciated, i'm struggling and the number of sensors i need to test will increase in the coming months.. please help!
should i even be using vlookup and hlookup? ive tried all the other excel functions, but they don't seem to be useful?
i would like the code that allows me to copy enything I typing in column a sheet1 to column a in sheet2
View 8 Replies View Related
