I have a XL work book with different worksheets what i need to do is compare cell a2 and e2 of worksheet 1 with all the data on sheet 2 and then return the data from the same row but in column m I dont know if this makes sense but it pretty much is the same as a VLookup but comparing 2 cells instead of one
View 9 RepliesI have data inputted into cells a-o in rows 1-250. I want to search, lets say row 1, (I do want to search all 250 rows if that info is relevant!) and if cell m is blank then I want to return all the info from row 1 into row 260. If there IS data in cell m then I want to return nothing. Bottom line I want to return all the data in all the rows that contains nothing in cell m.
View 3 Replies View Related621
532
249
I have these numbers located in column A (rows 1:3)
formula that will return my search result (in these case 532) as well as the information immediately above & below the location of cell that has my search info?
I am trying to create an automated receipt for a list of artists. I have given the artist an individual reference so I am doing a VLOOKUP to return description/price value etc but I can only get it to return the initial value and I have approx 10-15 works under each reference. Maybe VLOOKUP is the wrong formula to use.. I have attached the file.
View 5 Replies View RelatedEssentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 Replies View Relatedi have a little problem regarding look/ find/search procedure.
i dont know what exactly the term of this.
anyway i have attached an .xls file for your perusal.
problem:
- i want to search a value in a certain table and the return would be the value of index cell.
I understand how to set up a normal VLOOKUP, but I am not sure how to do the following: I am trying to set up a sheet that will find the last cell of a row containing "yes" and display the value of the cell at the top of that particular "yes" column. Maybe VLOOKUP is not the answer? I have attached an example of what i am trying to do.
View 5 Replies View RelatedI have a range of cells (C29:BB29) containing zeros and integers, I want to lookup the smallest non-zero value from that range in another range (C11:BB11) and return the cell address from C11:BB11 to use in a further SUM formula.
Is that possible?
I am looking for a way to construct a dynamic message box such that when a user right clicks on a cell, the macro will check the contents (a numeric code) of that cell against an existing table on another worksheet. This table would contain the codes and a text message specific to each code; the macro would insert the text message aligned with that code into a message box on the original worksheet.
View 3 Replies View RelatedI'm trying to return the cell address of an lookup. The lookup result is correct, but when I try use the below Address function, it just returns the text value (i.e., the formula itself) instead of the cell address. Below is the an example of each: ...
View 4 Replies View RelatedI am wanting to use a vlookup or perhaps an array(?) to bring through multiple cell values based on being the maximum value. So say there are multiple employees (all with unique ids) under one manager (also with unique ID), I want to find the employee with the highest value in a particular column and return that employees details, such as name, employee number and the value itself, which are all in the same row. I have attached a basic example of the data involved.
View 8 Replies View RelatedMy task is that I have several documents exported in excel. The requirements in them were mapped to another document. The IDs were populated in a certain column but are now no longer needed. I have to convert those old Ids to the current ones. In my example I have populated Sheet one with the lookup table. In column A are the old IDs. In Column B are the new ones they map to. The old ones can map to several which is why there are more than one ID in some of the cells. In column D of Sheet 2 I have populated it with the old Ids. In Column A I'd like to have the lookup return the appropriate maps to the new Ids. For example for the first map in cell A2 it should return:
abc_18
abc_43
abc_6
abc_4
all in one cell.
Vlookup can return the first hit (abc_18 and abc_43 for cell D2), but ignores the other two IDs in cell D2. I was able to work around this combining the find, mid, and vlookup to return all values. The problem with that is that the formula gets monstrously big after just having it return 4. In the actual files it can be up to 30 IDs which would make that formula literally pages long since. I have pretty much no experience with macros, but it seems like the only solution since I have to send this off to various people so they can use it.
The main worksheet in my workbook contains lists of suppliers with unique Vendor Numbers, of which there are approximately 4,500 rows. There is another worksheet which holds approximately 6,500 entries I need to bring data from that sheet to the main sheet using the Vendor Number and the information that is held on 4 columns unique to that number.
The information is a classification system that comprises of 4 columns holding a mixture of numbers and text.
Worksheet 1 has the Vendor Number in Column A and the Classification destination starting in Columns Q, R, S & T.
Worksheet 2 once again has the Vender Number in Column A, and the Classification information in Columns C, D, E & F.
What I need guidance on is how to build the formula to copy the information across, or direction into what other method I should be looking at instead.
At work I have a spread sheet that I used to track material shortages by part number. So in column A of the spread sheet there is a list of part numbers that have shortages, column E contains a list of all sales orders that are affected by the shortage separated by a comma. I am trying to setup a query sheet where I input a sales order and get back a list of parts that are short for that sales order(basically reversing the original list to be by sales order instead of part number). The number of values in column E varies, sometimes a cell will have 1 value, sometimes 20+ and anywhere in between.
Example Sheet:
A
B
C
D
E
123
012
234
789, 567
465
789
890
012
I'm already got a INDEX/MATCH that would show both shortages for sales order 012. But I can not figure out how to get the shortages for 789 or 567.
I have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
I have a table that has a number of new starters and corresponding appointments offered, what I originally required was to lookup the chronological date after the new start date.
However this has now been scuppered by my boss who has requested that not only lookup the date, but also add who the appointment is with, but if I do this the first array formula stops working and to tell the trust I'm not to sure how to do it anyway.
i just want to use vlookup and hlookup to give me the row and column headings for 30 to 40 sesor at a time.... but i keep getting #n/a whenever the functions meet a table of more than one column! (reduced workbook attached)
it should surely be simple to get this data - but i've struggled to no avail. I thought that having the four separate worksheets was the problem - but i haven't had any look even when i dump the data into a single worksheet!
i basically just want excel to return the cell reference of a sensor number which exists in a table. sometimes a sensor can appear more than once, but its not very common and i could happily work around that by doing the manual search (ctrl f, find all).
any advice would be very much appreciated, i'm struggling and the number of sensors i need to test will increase in the coming months.. please help!
should i even be using vlookup and hlookup? ive tried all the other excel functions, but they don't seem to be useful?
i would like the code that allows me to copy enything I typing in column a sheet1 to column a in sheet2
View 8 Replies View RelatedWorking on an export from an e-commerce application that lists the item purchased, unfortunately not by item #, but rather a lengthy description. I'm trying to construct an item number based on that description which contains several constants.
Each item ordered appears in a single row, comprised of ORDERID, QTY, PRODUCT DESCRIPTION
I have several tables to pick out PRODUCT TYPE, COLOR, SIZE, etc. I need a formula to search to see which of the unique values appears in each in the cell and return the shortcut of that value.
PRODUCT DESCRIPTION example "Sweater - Blue - Large - Wool"
TYPE TABLE:
Sweater SWTR
T-Shirt TSHT
Jeans JEANS
COLOR TABLE:
Blue BL
Green GN
Purple PL
Black BK
I would have separate tables for each part of the description.
The formula I'm seeking would search the PRODUCT DESCRIPTION cell for the range of values for each 'part'. So it would search to see which of Sweater, T-Shirt, or Jeans was in the cell and then return the one that was - SWTR in this example. I would modify this formula for each 'part', in its own cell, and then use an =cell#&"-"&cell#&etc... to combine these returned values.
I know I can write a large if- chain using ISERROR & FIND, though some of these lists will get lengthy.
I have a list of dates in column AF. I would like to retrieve a value from the 2nd occurrence of a date, so I used the function for the Nth Occurrence on this website as follows:
Function Nth_Occurrence(range_look As Range, find_it As String, _
occurrence As Long, offset_row As Long, offset_col As Long)
Dim lCount As Long
Dim rFound As Range
Set rFound = range_look.Cells(1, 1)
For lCount = 1 To occurrence
Set rFound = range_look. Find(find_it, rFound, xlValues, xlWhole)
Next lCount
Nth_Occurrence = rFound.Offset(offset_row, offset_col)
End Function
The excel formula I am using is as follows: =Nth_Occurrence(AF2:AF622,AE2,2,0,1)
Where AE2 is the date I am looking up. My question is this: When I put in a date ("1/12/2007") instead of AE2, i get the correct value. I tried giving AE2 and the AF column the same date formatting (3/14/2001), but this doesn't work. The date I am searching for also changes, so I cannot just type the date into the excel formula.
I have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View Relatedi want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have a condundrum that having trouble solving hoping someone may be able to help...
I am trying to return the contents of all cells that match a value based on another cell.. I have managed to achieve with the forumla below but it only returns the first value matched.
what I wish to do is return all values in ROW E where the value in ROW B equals Deliver and combine into one cell [F1].
ie.
B E F
DELIVER VALUEW VALUEW VALUEY
COLLECT VALUEX
DELIVER VALUEY
The formula I have currently uses index but only returns the first value found. I need to find all values and place in one cell. C5 holds value 'deliver'
=IF(ISERROR(INDEX( 'Salis Today'!$E:$E,MATCH(C5,'Salis Today'!$B:$B,0))),"",INDEX('Salis Today'!$E:$E,MATCH(C5,'Salis Today'!$B:$B,0)))
I think I am surrounded by trees and can't find the forest, I have a list of tariffs and need to get them to a generic name. The attached file may help, the gist of it is I need to output the generic name for each tariff instead of the supplier name for that tariff.
View 11 Replies View RelatedI want to look up a value in a range of cells and then return a value in a cell in the same row containing the desired value, similar to a vlookup. Except I want to search through several columns for this value and I would like to have it find every occurance of the desired value and return a value in a cell n the same row of each occurance of the desired value.
View 2 Replies View RelatedI'm trying to take the sum of multiple cells and return it to one single cell using the Vlookup
For Example I want to match the ID numbers from one spreadsheet and use the list of codes to return the value of the sum of all matched numbers. So in this example I would want the number 65 in one cell...