I have a range of lookup values I want to use to return the "Cell Reference" of the matching value in another vector (single column).
Is there a simple function that will do this..?
eg a variation of using VLOOKUP
I have a range of cells (C29:BB29) containing zeros and integers, I want to lookup the smallest non-zero value from that range in another range (C11:BB11) and return the cell address from C11:BB11 to use in a further SUM formula.
Is that possible?
Is it possible to get the location of the result cell of a lookup result. For example, instead of showing the cell value it shows the cell address of the results of a lookup. You see I have this Summary Report of a payroll system. Everyone doesn't need to pay social charges, except two people, "person1" and "person2". What I want to do is to first look at the names in the report to see if one of those people are listed in the summary(this can be done by lookup, I think). Then go to a different column on the same row as the person. So, for example, "person1" is in a14, then the macro will select the cell say... g14.
View 6 Replies View RelatedI'm trying to return the cell address of an lookup. The lookup result is correct, but when I try use the below Address function, it just returns the text value (i.e., the formula itself) instead of the cell address. Below is the an example of each: ...
View 4 Replies View RelatedI am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I'm trying to create a lookup process for my address part of my invoice, I want it so when I enter the first address it automatically looks up and enters the rest of the information (Title, Name etc.) I've been trying to do this with vlookup and I can't seem to get it to work. I'm just getting #Ref! returned.
My address 'database' (list of addresses etc) are on a seperate sheet to the Invoice.
I have a range of cells (say A1:D8).
I wanna find the address (say $B$2) of the minimum value in that range.
This command does it but it only works on a column. it does not accept a range spanning more than one column.
=CELL("address",INDEX(B2:B7,MATCH(MIN(B2:B7),B2:B7,0)))
this will tell me the address of the minimum value.. but in a column... I need a range of many columns.
So I tried converting things to a Table.. but it never worked. basically the MATCH command is my problem. It only accepts single-column-ed ranges.
determining the correct formula to lookup various details from multiple worksheet:
Data as follows:
Sheet1: input
AB1MonthSales2AUG55003MAY4000
Sheet2: Data
AB1MonthSales2JAN20003FEB25004MAR30005APR35006MAY40007JUN45008JUL50009AUG550010SEP600011OCT650012NOV700013DEC7500
b2,b3 Formula = Indirect(Address(match(a2,????,0),1,1,1,"Data"))
i dont know what is the correct range inside the match fuction to identiy the row number inside the Data sheet, i think the solution would be match(a2,Data!a2:a13,0) but things might get complicated if you have multiple worksheet such as sheet2: Data , sheet3: Data2, sheet3: Data 3
and each table has unsorted details compared to others sheets (Data vs Data 2)
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
I want to be able to lookup if anywhere in a cell contains a word from a list of words, and then provides an output.
Column G:
VAT payment
HMRC payment
Pay VAT
I have a table on the side that shows:
Column Y Column Z
VATHMRC
HMRC HMRC
ie. If anything in column G matches one of the words in Column Y, then output the Column Z. I have use a Vlookup that works for the first two, as VAT is the first thing, but dont know how to make it work if the key word is in the middle of the cell.
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
View 5 Replies View RelatedI have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4
I searched and I keep finding something that's not quite what I'm looking to do so I think I'm missing something really simple.
Let's say that I want each cell in col b to be the sum of 5 plus whatever value is in the cell adjacent to it on the left (col).
I know that you can just write a formula in each cell like...
b1 will be =sum(a1+5)
b2 will be =sum(a2+5)
... but is there a shortcut so that you don't have to write out the actual cell address for each one?
Meaning - is there a predefined name or something that represents the cell to the left or right so you can just use that instead, allowing you to just copy paste the same formula all the way down the column? Something like...
b1 will be =sum(left+5)
b2 will be =sum(left+5)
... where "left" represents whatever value is in the cell to the left of that particular cell?
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
View 2 Replies View RelatedIf a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I've a sheet that presents the profitability of sales locations in a geographic layout (similar to Tables in a restaurant), each sales location is a cell, with roughly 1,600 locations presented. Each location is colour coded based on performance / measure, in a basic thermographic way [e.g. dark blue for very poor, solid red for high performance] with users being able to change metrics and re-colour cells accordingly.
The sheet is already information rich, but I'm wanting to detect the cell address directly under the pointer and populate a text box or other cell based on the value in the cell directly below the mouse pointer.
My question is; Is there a simple way of detecting the mouse position on the XL Grid? nb. Want to avoid having to activate cell beneath pointer.
How can you access a cell's value via a vb variable that contains the cell's address. I have a vb variable named cellAddress (string) that contains "$A$1" and I want to assign the contents of what cellAddress points to another VB variable - how do i Do this?
e.g. if cellAddress = "$a$1" and A1 contains "xyz", I would like to assigne "xyz" to a new vaiable by referencing just cellAddress??? Also - Can anyone reccomend a good Excel VB book? A book that maybe stresses the VB language rather then a cook-book approach.
I have this certain value "Y" in all the sheets. In the summary sheet, I would like to get the cell address for this value in a given sheet. I know that you can get cell address using CELL worksheet function. However, for that you need to know the reference to the cell, which is what I am interested in.
I tried Hlookup to get column #. But couldn't figure out how to convert the number to letter so that I can use MATCH to get row # and then finally, index or address function to what I am looking for.
If someone knows how to convert column # to column letter OR knows a better/easier way to obtain cell reference/address based on cell value,
I am looking for a formula that returns the cell address of the last cell > 0 in a range.
in the example: A1CLA23 8
4546557528
the result should be A7.
Display Alert On Closing If Cell Not Filled In
How do I alter this code so that it acts like an INDIRECT function so will pick up a cell reference in another cell?
I can't just use A1 as I want this to change dynamically.
I have an embedded chart on my worksheet.I can select a cell behind the chart using the keyboard arrow keys.Is there a way of doing this using a mouse click,so that I know which cell i am pointing to/choosing?
View 4 Replies View Relatedhow can I use the cell function inside a NPV fuction as one argument of the start for the NPV string to calculate?
View 3 Replies View Relatedhow to Get a last cell but one only address
View 6 Replies View Relatedregarding the cell value. What i am trying to do is I have alot of cells with datas and in cell(1,8) I have a data. I will search through these cells and if they match with data of cell(1,8), it will return me the cell (x,y) with x and y being the row and col numbers. Is there any command that I can continue with the below code to get the x and y?
For Each cell In Range(Cells(3, 4), Cells(500, 26)
If cell.value = cell(1, 8).value Then
I have a variable Num that covers the range of C5, C6, and C7. I would like to figure out how to write the code that grabs just the column portion of say C5.
Set Num = Range(Range("C5"), Range("C5").End(xlDown))
Something like,
Range(Column(Num), 3).Value or something like that
I have created the below formula to return an address. I need to use this address in the second formula ("cell address here"), If i am completely off base please point me in the right direction..
=CELL("Address",INDEX($BO$23:$BO$40,MATCH($BE$4,$BO$23:$BO$40,0)))
=OFFSET("Cell Address here",10-$BI$1,0,1,1)
I am trying to write a line for my little project but came to a stop as I do not have enough knowledge on how to get around this.
Most likely its something very simple but I'm not an expert so hopefully someone here can put me out of my misery.
I am trying to get this to work:
Function IF(AND(sheet!A1=sheet2!A1),x,y) works fine but for what I need to do I need to get sheet2!A(1+B1) As soon as I do that it all goes funny. In B1 I have a number that determines by how many cells A1 needs to be offset but I cannot get the syntax right.
I have a dataset with full addreses listed in one cell. I would like to use "text to columns" to separate the data but am unable to use the text separater in the wizard. When I open the text to columns wizard the data appears to be divided with a "square" but I cannot add it as "other" for the delimeter. see the attached.
View 2 Replies View Related