I have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
How do I rotate sheet tabs 90 degrees?
View 1 Replies View RelatedI have created a table in Excel that I want to import in a word portrait page, but would like to rotate it to 90 degrees.
I would like the table to take the whole page and that I still have some space above the table to put table number and description.
I have uploaded the table in excel and a screenshot of the way I would like the table to appear in word file.
Is it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 Replies View RelatedNeed to convert decimal degrees into degrees, minutes, & seconds (displayed in three columns). Currently calculated manually from ATAN, ASIN, or ACOS functions.
View 5 Replies View RelatedI had a similar problem a day or two ago in converting Deg Min.dec to Deg.dec and it has happened again. This time I want to convert Degrees Minutes & Seconds to Degrees.decimals.
The formula I am using works for a two digit number Lat. but not 3 Long.?? Here it is below:
=+IF(A2<>"",INT((LEFT(A2,3)+MID(A2,4,2)/60+MID(A2,7,4)/3600)*100000)/100000&"d","")
how would you take decimals to dms, and also how to put dms into the right bearings?
Reference: Covert degrees, minutes and seconds to decimal degrees
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I am rotating an image on a userform by uploading different gif images to simulate the rotation. There is an annoying screen flicker around the image when changing images that I would like to get rid of if possible. how to get rid of the flicker or a different technique I could use to rotate an image? 1st attempt - uploading different pictures
For h = 1 To Sheets("Bar Contents"). Range("B" & ItemRow) Step 1
PictureLocation = ThisWorkbook.Path & "PicturesTransparent" & Sheets("Bar Contents").Range("C" & ItemRow) _
& " " & h & ".gif"
GameUserForm.DrinkAnimation.Picture = LoadPicture(PictureLocation)
Sleep 50
DoEvents
Next h.........................
I've writing excel formulas to convert Decimal Degrees (DD) to Degrees Minutes and Seconds (DMS) and back again for astronomy. These are for converting DD angles for telescope Right Ascension (RA) and Declination Angles (DEC) pointing.
I've got the formulas to work except for one minor annoyance. Try this formula for converting DEC DD angle of -1.5° to a DEC DMS angle: ....
I have degree values as this 4145.5
Which is 41 degrees 45.5min
and 0010.2
Which is 0 degrees 10.2min
I need 4145.5 and 0010.2 to be converted to decimals so that I can add and subtract them
Then the answer needs to be converted back into
a format like this
45° 45.5'
I am trying to convert Degrees Minutes & Decimals of a minute (12° 34.567') to Degrees and decimals of a degree (12.57611°). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:
=IF(A2="","",(INT((LEFT(A2,3)+MID(A2,4,6)/60)*100000)/100000)&"d")
probably missing something simple, but how do I centre the text in a userform "Label"
View 2 Replies View Relatedhow to rotate a label to a 45 degree angle on a user form.
View 9 Replies View RelatedI struggle with my old excel (2003). There is a thing i have to do: put arrows from one sheet which will change its color depending on data, written in some fields. Also there is a task to put these values inside created arrows. I put values using commands:
Worksheets("Map").Shapes("COL").Select
With Selection.Characters
.Text = Range("Data!E4").Value
Arrows are drawn in different angles using drawing tool. So i need to rotate the text inside the arrows respectively to angle of the arrow rotation. So how is it possible to rotate text inside that shape?
I am trying the below code but I get an Method of Object failed!
Private Sub Label4_Click()
ActiveWorkbook.FollowHyperlink Address:="http://www.rmdmo.co.uk/"
End Sub
I am trying to format a label as a number with two decimals. I have searched this and other forums and see code such as:
Label18.Caption=Format(sheet1.Range("A!").Value, "0.00")
It always gives me an error: "Wrong number of arguements or invalid property assignment"
The word "Format" is highlighted.
I have tried putting the code in userform Initialize and also Activate. I am using Excel 2002.
I have a userform with seven textboxes. I want to sum up the values in those textboxes and print the result in a label caption on the form. The label which displays the total needs to be updated every time anyone adjusts the textboxes. Because I need to have it update like this, I need to have a separate (short) procedure that I can call (when a textbox is adjusted) to sum up the textboxes once again, and place that sum in the label caption.
I have encountered a weird problem. When I update the label caption during the USERFORM ACTIVATE procedure, everything works fine and dandy, even though the summing is taking place in a separate procedure. But I cannot realistically run this entire activation procedure every time the user changes the number in a textbox. (Or, I should say, it just seems like sloppy programming to me.) I really need to update the label caption in a separate smaller procedure. However, when I change my code so that the label caption gets updated during the smaller procedure (which performs the summing operation), the caption remains blank.
Is it possible to create a translucent background on a userform label?
View 4 Replies View RelatedI am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value
I mean I want to lable2 = cell value as link
anyone know how to display data using label on userform? I tried using offset but it doesnt work. The data I want to display is in column G. How do i go about that?
View 13 Replies View RelatedI have a userform that shows while a macro is running. The userform just informs the user that the macro is still in progress. However, I can get the userform to show and the macro to run, but the label on the userform won't appear. Here is the code I have:
Code:
Private Sub Userform_Activate()
Application.ScreenUpdating = False
Sheets("Data").Select
[Code].....
I am trying to make a Progress bar with a statment using a Userform with a label saying Please wait. I call the form using UserForm1.Show vbModeless.The form shows and functions as needed but the label with the caption please wait is not visible. how to get the label to show?
View 1 Replies View RelatedI present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?
e.g.
The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
View 2 Replies View RelatedI would like to ask if there is a possible way for a Label to display information that are based on multiple textboxes? All the information are based on the textboxes and listboxes that are in the userform and will be displayed on the Label (label16)
userform.png
**Cross reference link: [URL]
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
Userform Activate Label in correct format. I have the following code in a userform activate
View 2 Replies View RelatedIs there any way to change a label in a user form based on the value of a cell?
I'm trying to link a series of labels to a small range of cells that change based on a data-validation drop box.
I've tried finding info, but I can't seem to find the right place.
The code I've tried so far without result is:
Code:
Private Sub Label3_Click()
Me.Label13.Caption = ActiveSheet.Range("BQ15")
End Sub
I create a series of labels and text boxes at runtime.
Code:
for x = 1 to 10
labelName = "label" & x
Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True)
next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.