I present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?
e.g.
The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.
I am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value
I mean I want to lable2 = cell value as link
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
View 2 Replies View RelatedI want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
As i want this for display purpose only can i use the label caption for the above question?
I'm trying to change the caption of a label (OLEobject) and it is not working so far :
[Code].....
I have just noticed that there is no defult event for the running code after updating a label caption. I would like to have like a textbox does (Change,AfterUpdate). to run code on the label caption change. could it be done with activex?? can it be done at all.??
View 2 Replies View RelatedHow to copy a label caption (from userform) then paste it in a worksheet.
View 2 Replies View RelatedI have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
View 7 Replies View Relatedi've got a form that shows employee data in labels, and i'd like the user to be able to double click a label to change it (using a pop-up form). is it possible to get the pop-up to show after a double click instead of a single click?
View 5 Replies View RelatedI needed to put a Checkbox on a Worksheet. The standard Checkbox options in Excel FormControl and ActiveX Control were too small. I found a work-around using the following macro attached to an ActiveX Label that was formatted as Wingdings font. The macro basically changes the character from a empty box Wingdings Chr(168) to a checked box Wingdings Chr(254) when the user clicks on the label.
Private Sub Label1_Click()
If Label1.Caption = Chr(254) Then
Label1.Caption = Chr(168)
[Code]....
But I get this error on an ErrorHandler that I have included in the macro. "An error has occurred. Error number =438. Error Description=Object doesn't support this property or method."
For a form that dynamically creates a series of text boxes and labels, does anyone know how to change the caption of a dynamically created label to display the value of a cell in a worksheet? The cell in the worksheet changes according to input on the text boxes. In the form's code, I have:
Dim newLblFreq As MSForms.Label
Set newLblFreq = Me.Controls.Add("Forms.Label.1", "lblfreq" & i, True)
newLblFreq.Caption = Range("V" & i).Text & " Hz"
But once the label is created, the caption won't change, even if Range("V" & i) changes...............
I'm amtepting to populate some labels from some predefined strings based on the scrollbar value. I have these codes:
Option Explicit
Public Meddelande1 As String, Meddelande2 As String, Meddelande3 As String, Meddelande4 As String, Meddelande5 As String, Meddelande6 As String, Meddelande7 As String, Meddelande8 As String, Meddelande9 As String
Private Sub UserForm_Initialize()
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Application. ScreenUpdating = False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Meddelanden").Activate
Meddelande1 = Range("B2").Text
Meddelande2 = Range("B3").Text....................
I'm buildng a userform for data input.
As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.
I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"
If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1"
If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2"
End If
End If
Background: I currently have an some VBA code that will kick off a series of calculations on a remote server (7 calcs). I am showing a modeless form, to allow the user to continue to work in Excel while the external calculation is taking place. The code checks every few seconds (using .OnTime) to check the status of the calcs, and as one finishes, it starts the next calc, and updates the form (ie - "Running Calc #3 of 7", etc).
'Do calc
'Finish calc
frmProgress.labMessage.Caption = "Running Calculation: 'Revenue'"
'Do another calc
'Finish another calc
frmProgress.labMessage.Caption = "Running Calculation: 'Labor'"
'etc...
Problem: when I change the label on the form, it gives the form focus. So, if the user is in the middle of doing something, they are suddenly stopped, and have to click back on the spreadsheet to continue.
Questions: Is there a way to update content (label) on a form, without that form getting focus? If not, is there another way to provide updated feedback without disrupting what the user is doing? My fallback is to simply not update the form with progress reports, but since the calcs can take 5min or so, it would be good if they knew things were progressing.
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
I have a userform that has a "payment type" combo box
This box consists of:
I have 3 labels in my userform that I want to display the text in AN50,AN52 and AN54 in all the time. How can I write this code?
View 9 Replies View Relatedits possible to convert a blank string on a label into an integer? My form loads and populates a label.caption with the value of the activecell.value. Sometimes the activecell.value is empty and sometimes has a number in it. I need to do a calculation (label.caption * 2) but if the label.caption is empty it throws an error. I need it to treat an empty label as zero.
View 2 Replies View RelatedIs it possible to have a caption on a label with mixed font size. I tried this but the 2nd call just overwrote the first.
Code:
Private Sub UserForm_Initialize()
Call EM
Call aint
End Sub
Public Sub EM()
[Code] ......
I have a listbox that is currently populated via the following code, designed to give a unique list with no repeats.
Code:
Sub UserForm_Initialize()Dim UniqueList() As String
Dim X As Long, y As Long
Dim r As Range, rAll As Range[code].....
This code works fine. NOW, what I need to do, is set individual labels, based on the values in the listbox, BUT, here is the kicker - I don't want to select any of the listbox values. I know there will be seven rows in the listbox that correspond with seven labels.
What I nede to do, is set the first label.caption as the first row in the listbox. The second label as the second row, etc. The listbox only has one column, and I have tried the following code, but it doesnt work.
Code:
With UserForm2 .Label1.Caption = .lbxParalegal.List(0, 1)
End With
I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?
View 2 Replies View RelatedI'd like to: Display the contents of a group of cells in a userform's label's caption. The columns containing the cell's which contents would be displayed are fixed (do not change). The rows will change. I need to reference the Ar, Br and Cr columns (where r is for row) of whichever column I am working on at a given moment.
View 4 Replies View RelatedI have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold
I have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I have the following code in a userform_initialize
ComboBox10.AddItem "0"
For x = 1 To 13 Step 1
ComboBox10.AddItem Format(x, "0")
Next x
ComboBox10.Value = Sheet4. Range("H25").Value
ComboBox10.ListIndex = 0
I would like to make the list index = 13 if the Label.Caption associated with the combobox = "Spare". I have 'Option Explicit' turned on & I get a message 'variable not defined'. How would I code this properly or more to the point I guess, what is the variable I should be using?
UserForm1
Current OptionButton names are like ABC123, ABC 124, etc.
How can i change all names, with code - as i am not seeing a find and replace option within UserForms, to all but the "ABC" part, the result of the OptionButton names shall therefor be 123, 124, etc. - delete "ABC" or, find "ABC" and replace with
I have frame on a userform with command buttons. Is it possible to loop thru and capture the command button captions in a textbox. I'm trying to put together keyboard on a userform, so the user can populate a textbox with letters or phrases.
View 6 Replies View RelatedHow do you references the properties of a shape? I am having trouble with 2 different types. Firstly, I have a worksheet with a group of commandbuttons (all added using the Control toolbox) and I want to loop through them changing, for example, the enabled property of each to TRUE.
Secondly, I have some commandbuttons on a worksheet (added using the Forms toolbox). How would I loop through changing, say, the text on the buttons. I used the macro recorder to try to get an idea and got the following:
Sheet1.Shapes("button 15").Select
Selection.Characters.Text = "New Text"
Although this works, it is not very elegant, how can it be achieved without selecting the button each time, but rather by directly accessing the property.