Label On Userform Not Updating
Apr 12, 2007
I have a userform with seven textboxes. I want to sum up the values in those textboxes and print the result in a label caption on the form. The label which displays the total needs to be updated every time anyone adjusts the textboxes. Because I need to have it update like this, I need to have a separate (short) procedure that I can call (when a textbox is adjusted) to sum up the textboxes once again, and place that sum in the label caption.
I have encountered a weird problem. When I update the label caption during the USERFORM ACTIVATE procedure, everything works fine and dandy, even though the summing is taking place in a separate procedure. But I cannot realistically run this entire activation procedure every time the user changes the number in a textbox. (Or, I should say, it just seems like sloppy programming to me.) I really need to update the label caption in a separate smaller procedure. However, when I change my code so that the label caption gets updated during the smaller procedure (which performs the summing operation), the caption remains blank.
View 7 Replies
ADVERTISEMENT
Aug 17, 2012
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
View 4 Replies
View Related
Oct 17, 2005
I have a number of charts (mostly pie) I don't have a legend, but I do have "Show label and percent" selected.
When I add in new data the actual chart updates to show the right sized pie slices... but the values on the labels don't update as well. I can't figure out how to make that happen?
View 9 Replies
View Related
Oct 10, 2011
I am trying the below code but I get an Method of Object failed!
Private Sub Label4_Click()
ActiveWorkbook.FollowHyperlink Address:="http://www.rmdmo.co.uk/"
End Sub
View 7 Replies
View Related
Jun 12, 2007
I am trying to format a label as a number with two decimals. I have searched this and other forums and see code such as:
Label18.Caption=Format(sheet1.Range("A!").Value, "0.00")
It always gives me an error: "Wrong number of arguements or invalid property assignment"
The word "Format" is highlighted.
I have tried putting the code in userform Initialize and also Activate. I am using Excel 2002.
View 9 Replies
View Related
Jun 24, 2008
Is it possible to create a translucent background on a userform label?
View 4 Replies
View Related
Jun 17, 2014
I am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value
I mean I want to lable2 = cell value as link
View 3 Replies
View Related
Nov 27, 2008
anyone know how to display data using label on userform? I tried using offset but it doesnt work. The data I want to display is in column G. How do i go about that?
View 13 Replies
View Related
Dec 3, 2011
I have a userform that shows while a macro is running. The userform just informs the user that the macro is still in progress. However, I can get the userform to show and the macro to run, but the label on the userform won't appear. Here is the code I have:
Code:
Private Sub Userform_Activate()
Application.ScreenUpdating = False
Sheets("Data").Select
[Code].....
View 1 Replies
View Related
Mar 11, 2014
I am trying to make a Progress bar with a statment using a Userform with a label saying Please wait. I call the form using UserForm1.Show vbModeless.The form shows and functions as needed but the label with the caption please wait is not visible. how to get the label to show?
View 1 Replies
View Related
Jun 20, 2008
I present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?
e.g.
The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.
View 7 Replies
View Related
Mar 31, 2014
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
View 2 Replies
View Related
May 10, 2014
I would like to ask if there is a possible way for a Label to display information that are based on multiple textboxes? All the information are based on the textboxes and listboxes that are in the userform and will be displayed on the Label (label16)
userform.png
**Cross reference link: [URL]
View 14 Replies
View Related
Apr 19, 2008
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
View 9 Replies
View Related
Nov 19, 2009
Userform Activate Label in correct format. I have the following code in a userform activate
View 2 Replies
View Related
Mar 18, 2011
Is there any way to change a label in a user form based on the value of a cell?
I'm trying to link a series of labels to a small range of cells that change based on a data-validation drop box.
I've tried finding info, but I can't seem to find the right place.
The code I've tried so far without result is:
Code:
Private Sub Label3_Click()
Me.Label13.Caption = ActiveSheet.Range("BQ15")
End Sub
View 9 Replies
View Related
Feb 14, 2012
I create a series of labels and text boxes at runtime.
Code:
for x = 1 to 10
labelName = "label" & x
Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True)
next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.
View 7 Replies
View Related
Jul 23, 2013
I have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
View 4 Replies
View Related
Apr 2, 2008
Is it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 Replies
View Related
Apr 20, 2008
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
As i want this for display purpose only can i use the label caption for the above question?
View 3 Replies
View Related
Jul 16, 2014
How to copy a label caption (from userform) then paste it in a worksheet.
View 2 Replies
View Related
Aug 9, 2009
I have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
View 7 Replies
View Related
Dec 21, 2009
I have a userform that has a "payment type" combo box
This box consists of:
View 6 Replies
View Related
Nov 26, 2013
Is there any way to display one-third 1/3 in a Userform label control?
View 9 Replies
View Related
Oct 6, 2009
I am building a conversion calculator on a userform. There is a textbox I've named "UserPctOff" where the user enters their value. I've got a label that I'm using to record the converted value. I keep getting Type 13 Mismatch error.
Here is my code.
Private Sub UserPctOff_AfterUpdate()
UserPctOff = Format(UserPctOff.Value / 100, " Percent")
LabelMDRate = UserPctOff.Value / (1 - UserPctOff.Value)
End Sub
View 4 Replies
View Related
Feb 29, 2008
i've got a form that shows employee data in labels, and i'd like the user to be able to double click a label to change it (using a pop-up form). is it possible to get the pop-up to show after a double click instead of a single click?
View 5 Replies
View Related
Jan 12, 2013
I need to write some code to update a label everytime the textbox data is edited. I have this code so far but it is returning an object error. NineV refers to the text box and and ninelabel refers to the label. This is the code:
Code:
Private Sub NineV_change()
Dim nivevalue As Integer
ninevalue = (((GP / 31.1035) * 0.255) * NineV.Text)
NineLabel.Caption = "£" & ninevalue
End Sub
View 1 Replies
View Related
Feb 7, 2014
can't get the data to update right. It updates the cells but also overwrites the first person's name.
View 5 Replies
View Related
Aug 3, 2009
I am trying to update a Textbox from two Listbox's and several Textbox's as the user enters values (or double clicks the textbox for a value). (DoubleClick code is completed). I have ten textbox's to enter data into (or double click for prior data stored in the registry). Two Listbox's requiring one selection each. The last textbox (textbox11) produces the text as it is being entered from the previous ten, I currently enter the data in a specific order to build my string, which I want to stick to. If the user has entered the wrong data in any of the active textbox's I would like to be able to update the string shown in textbox11 without losing any data from the string.
Hence where my brain cells are popping. My current code (laughing is a pre-requisite). Is in the next two posts due to character length restrictions (no dis intended). Attached is a screen shot of the userform. In the textbox labeled "FCF" all the data you see that is not in any of the textbox's or listbox's is written in from code.
View 4 Replies
View Related
Sep 3, 2009
I have a UserForm that contains a progress bar. This bar is updated dynamically as the code progresses, but for some reason the lables on the form are not updating themselves. I have tried adding a time delay to see if it is that but to no avail. Code Below.
View 2 Replies
View Related
