Is it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 RepliesWe can center horizontally with TextAlign (Left, right or center). Can we center text in a textbox on a userform vertically? I am working with multiple fonts, when a user selects a font I attempt to format a textbox as a display to show what is being created (Best WYSIWYG as I can). I have this particular font that is just ugly but is required. My textbox is set for a 12 point font but the displayed characters partially appear below the lower portion of the textbox. Think of cutting off about 1/3 of the bottom of all text in the textbox.
In my textbox it seems like the text could be moved up (some type of top margin?). All other fonts appear to display in the textbox vertically central, so I believe its the particular font selected causing the as displayed anomaly.
I know how to center text from left to right, but how about from top to bottom?
View 3 Replies View RelatedI have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I'm having trouble centering my UserForms on the screen. I have tried all the options on the StartUpPosition in the Properties windows and the closest I can get is vertically centered but on the far left. The annoying thing is that it was working (both vertically and horizontally centered) but when I changed the defaults of the option buttons they moved to the position I described. I have two monitors (but excel is maximised on one monitor only) could this have something to do with my problem? If so why did it work before?
View 6 Replies View Relatedprobably missing something simple, but how do I centre the text in a userform "Label"
View 2 Replies View RelatedIs there any way to tell a userform to always open in the center of the excel screen? It always seems to open somewhere in outer space on multiple screen setups.
View 9 Replies View RelatedI have a list of numbers I want to display horizontally instead of vertically. Is there a simple way to do this other than retyping each number?
My worksheet is attached.
Had a quick browse through the forums for an answer but as it is quite hard to describe i cant quite find the answer.
Basically I need to split some cells but they have stacked text in them i.e
Cell a1 shows:
666666
part 77777 x 20
5x s452563
Cell b1 shows:
1x 254684564
3x 4481211111 & 5 ea g8373
etc.
When i run the text to columns function i only get the first line of the data, i could ideally like to split the data by spaces and/ or line breaks.
can you format msgbox? i want to centre/center some text
(also - mods...
....If are you new to the forum, or unsure,...
surely -
...If you are new to the forum, or unsure,........?
)
Following is what I want to do:
Draw a line from the center of the first cell to the center of another cell.
I have a macro that output a month based upon a date that has been entered in a row on my spreadsheet. I want the macro to center the text but im not sure of the syntax, the macro code is below:
View 2 Replies View RelatedI have the following code,
i would like to select columns A:W and center the text
Private Sub Workbook_NewSheet(ByVal Sh As Object)
Sh.Range("A1") = "W/O"
Sh.Range("B1") = "CUSTOMER"
Sh.Range("C1") = "DETAILS"
Sh.Range("D1") = "CUST PART NO"
Sh.Range("E1") = "STATUS"
Sh.Range("F1") = "NOTES"
Sh.Range("G1") = "DEPARTMENT"
Sh.Range("H1") = "DATE"
Sh.Range("I1") = "CUST ORDER NO"
Sh.Range("J1") = "DEL NO"
Sh.Range("K1") = "QTY"
Sh.Range("L1") = "SALE PRICE"
Sh.Range("M1") = "CARRIAGE OUT"
Sh.Range("N1") = "TOTAL SALES"
Sh.Range("O1") = "INT CODE"
Sh.Range("P1") = "SUPPLIER"
Sh.Range("Q1") = "COST PRICE"
Sh.Range("R1") = "CARRIAGE IN"
Sh.Range("S1") = "TOTAL HRS"
Sh.Range("T1") = "LABOUR COST".......................
I'd like to align the text in comboboxes to be centred vertically - purely cosmetic I know, but "pretty = better" in my book!
View 3 Replies View RelatedI am trying the below code but I get an Method of Object failed!
Private Sub Label4_Click()
ActiveWorkbook.FollowHyperlink Address:="http://www.rmdmo.co.uk/"
End Sub
I am trying to format a label as a number with two decimals. I have searched this and other forums and see code such as:
Label18.Caption=Format(sheet1.Range("A!").Value, "0.00")
It always gives me an error: "Wrong number of arguements or invalid property assignment"
The word "Format" is highlighted.
I have tried putting the code in userform Initialize and also Activate. I am using Excel 2002.
I have a userform with seven textboxes. I want to sum up the values in those textboxes and print the result in a label caption on the form. The label which displays the total needs to be updated every time anyone adjusts the textboxes. Because I need to have it update like this, I need to have a separate (short) procedure that I can call (when a textbox is adjusted) to sum up the textboxes once again, and place that sum in the label caption.
I have encountered a weird problem. When I update the label caption during the USERFORM ACTIVATE procedure, everything works fine and dandy, even though the summing is taking place in a separate procedure. But I cannot realistically run this entire activation procedure every time the user changes the number in a textbox. (Or, I should say, it just seems like sloppy programming to me.) I really need to update the label caption in a separate smaller procedure. However, when I change my code so that the label caption gets updated during the smaller procedure (which performs the summing operation), the caption remains blank.
Is it possible to create a translucent background on a userform label?
View 4 Replies View RelatedI have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value
I mean I want to lable2 = cell value as link
anyone know how to display data using label on userform? I tried using offset but it doesnt work. The data I want to display is in column G. How do i go about that?
View 13 Replies View RelatedI have a userform that shows while a macro is running. The userform just informs the user that the macro is still in progress. However, I can get the userform to show and the macro to run, but the label on the userform won't appear. Here is the code I have:
Code:
Private Sub Userform_Activate()
Application.ScreenUpdating = False
Sheets("Data").Select
[Code].....
I am trying to make a Progress bar with a statment using a Userform with a label saying Please wait. I call the form using UserForm1.Show vbModeless.The form shows and functions as needed but the label with the caption please wait is not visible. how to get the label to show?
View 1 Replies View RelatedI present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?
e.g.
The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.
My current spreadsheet shows text that's aligning just slightly to the left of center. In the Format Cells menu under Alignment, I have selected Center for both Horizontal and Vertical. There is no indent. Orientation is 0 degrees. Text is set to wrap. Merge cells is unchecked. Text direction is Context.
When I double click a cell to change the text, it centers correctly as the cursor blinks. But when I click somewhere else and it stops blinking and allowing me to type in the cell, it aligns slightly to the left of center.
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
View 2 Replies View RelatedI would like to ask if there is a possible way for a Label to display information that are based on multiple textboxes? All the information are based on the textboxes and listboxes that are in the userform and will be displayed on the Label (label16)
userform.png
**Cross reference link: [URL]
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
Userform Activate Label in correct format. I have the following code in a userform activate
View 2 Replies View Related