Round Percentages (Up And Down) By Multiples Of 5%
Sep 29, 2009How do I round percentages, both up and down, to the nearest 5%?
Ex. 82% to 80% as well as 84% to 85%
ADVERTISEMENT
Round Total Time To One Hour Multiples With A Minimum Of Two
Apr 4, 2009I need a basic formula that will take my start time from my end time and round it up to the next hour with a two hour minimum. I formated my cell to not have decimals and I tried to use round and roundup along with and if/then formula but no luck. If it makes any difference, all times are in 24hr format.
View 6 Replies View RelatedMultiply A Number By Percentages And Round So That They Add Upto The Total %
Mar 14, 2009I want to multiply a number say, 1551 by 5%, 6%, 7%, 8% and 9% and round each result to 0 decimal places. Then the sum of these results (544)should be equal to 35% of 1551 rounded to 0 decimal places (543). How do I create an if function for rounding so that the sum equals 543.
View 6 Replies View RelatedScale Of Percentages Using IF Statements And Percentages?
Jun 27, 2014I need a formula to create the following:
In Cell F5 is 26, so the percentage should be 101% (100+1). How can I modify the below to add 1% when the number goes over 100%?
Do I have to create two columns? one for the below and one if the F6 is over 100%?
IF(F6="N/A","N/A",IF(F6>=25,1,IF(F6>=19,0.8,IF(F6>=13,0.6,IF(F6>=7,0.4,IF(F6>=1,0.2,IF(F6
VLOOKUP With Multiples
Feb 4, 2014I have attached an example. on the "master" sheet in column L I need a vlookup which will look up the information in column I & J and return the appropriate amount for that from column C of the "sheet3" tab. If there is nothing it should just return 0.
Sample Macro jscalem.xlsx
Multiples Of A # Formula..
Oct 13, 2008Is it possible to have a forumla that gives a True or False (perferably if it's possible for a conditional formatting to change colors) for multiples of a number. I would input a number in the cell and it would change the cell color if it not a multiple of say for example 13.
View 5 Replies View RelatedRounding By Varying Multiples?
Feb 27, 2014I need to be able to round a given number (stock required) up to the next multiple of another number (pack size), as in the attached example.
Also, is there a way I can round to the closest multiple, ie either up or down, depending on which multiple is closer? I haven't decided which way I want to go yet!
Output Data In Multiples Of X?
Aug 5, 2013I need the output in B1 to be in multiples of the value in A1, rounded up.
example:
Value in A1 is 6
random formula in B1: =IF(AND(N2>$AA$1,S2>0),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2>$AA$1,S2=""),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2<$AD$1,S2=""),ROUND((30/$AD$1)*AD2-Z2,0),IF(AND(N2<$AC$1,S2=""),ROUND((30/$AC$1)*AC2-Z2,0),IF(AND(N2<$AB$1,S2=""),ROUND((30/$AB$1)*AB2-Z2,0),IF(AND(N2=M2,N2<$AA$1,S2>0),ROUND(30*(AA2/N2)-Z2,0),IF(AND(N2<>M2,N2<$AA$1,S2>0),ROUND(AA2*(30/$AA$1)-Z2,0))))))))
So if the resulting value of my B1 formula is 2.33, I'd like to have the output be 6. If the resulting value is 14.55, I'd like the output to be 18.
Delete Shiftup Multiples Of 25
Sep 17, 2009Is ther a way to search a column from M9 down and delete all numbers that are not multiples of 25. Also delete shiftup column N with it? i.e.
From:
1200.......399
1225.......700
1250.......325
1260.......320
1274.......500
1275.......251
1300.......102
To:
1200.......399
1225.......700
1250.......325
1275.......251
1300.......102
Pivot Chart Top Population Multiples
May 5, 2014I'm trying to make a sales chart defining the top 6 most popular items I'm having a problem.
Attachment 316136
Excel Return Multiples Cell Behind One?
Mar 8, 2014I need to create a vlookup to find a cell and returns all cells that are underneath, in the example:
jicRD.jpg
I need to find the color and return all cells that are down
Countif - Counting Multiples Of Same Value In Same Cell
Oct 3, 2012I've got a head-scratcher here that no one in the office can figure out (at my level anyway). I'm trying to count multiples of the same value within the same cell. For instance, if one cell's value is:
2, 2, 4, 5
I need my '2' count column to return two '2's. I'm using a wildcard because the cells will contain the numbers 1-7, some multiple times, and usually in different orders. The wildcard formula I'm using only picks up one if multiples of the same value are entered in one cell. Here's the formula:
=COUNTIF($C$4:$AG$60, "*"&"2"&"*")+COUNTIF($C$4:$AG$60, "2")
This formula only returns a value of one in the '2' count column. It can't find the second '2' for some reason. I haven't been able to make COUNTA work either.
Countifs In Multiples Sheets Calculation?
May 7, 2013i have created a file for tracking my employee trandiness however, when i want to count the M, P, X ,L & AP keys which i already created it gives me OK for one month but when i tryied to calculate more than sheet "month" gives me error !! i used the below farmula :
=COUNTIFS(tblJanuary[@[1]:[31]],KeyPersonal)
how to calculated the above fx in every month. !!
Converting Input Column Into Multiples
Jan 6, 2009I know Excel quite well but this problem has me beaten and I have searched high and low to know avail.
I have an input column of departments and names which is ever-changing and currently I have hard-coded them into a spreadsheet to run a couple of drop down columns. However, I really want this to be automated and no longer hard-coded so that names are in the correct departments automatically.
SUMPRODUCT Equation Based On Multiples
Mar 4, 2009to create the following formula which I'm now repeating in more elaborate forms. At the moment I am using the formula below but I need to get the bit in red in the second half of the formula to search on more than the one condition.
Currently it is searching a postcode abbreviation field and is picking up all those with 'BS' however I don't just want to search on BS. I would like to search on BS, BA, SN, TA, GL. I have tried putting different combination using commas and plus signs etc in but excel doens't seem to like the way I'm doing it.
=SUMPRODUCT(--(Sheet1!$T$3:$T$10000=A49),--(Sheet1!$S$3:$S$10000="BS"))
Values In Range 1, Multiples Of 10th
May 3, 2006My question is presented, in details, in the attached file. Only Range 1 (B6:B15) should be generated by "Excel". (the numbers in Range 1 were typed by me as trials only...) (All other Ranges should not be touched). The values in Range 1 can be Multiples of 10th. only. (10, 20, 30, 40, etc....)
View 3 Replies View RelatedCalculate Time Difference In Various Multiples
Oct 16, 2007I am setting up a time and attendance system.
What I want to do is calculate the overtime that someone has worked but in multiples of 15 minutes.
Example, if someone worked 20 minutes over they would be paid for 15 minutes overtime.
If someone worked 31 minutes over they would be paid 30 minutes overtime.
The possible overtime someone could work in one day is 6 hours.
I want it to return the overtime in decimal numbers (e.g 0.25 for 15 minutes overtime).
I have attached a sample spreadsheet.
I would prefer this to be done in VBA if possible?
Add Standard Set Of New Worksheets In Varying Multiples To Workbook
Feb 16, 2012I would like to be able to add a standard set of new worksheets in varying multiples to my workbook from time to time.
How would I:
1. COPY the entire contents of a worksheet I've named 'Last' (content may be added to from time to time - so 'copy all' rather than a set range, so that:
2. Each worksheet created after 'Last' is named in turn 'Vendor1', 'Vendor2' etc
Sometimes I will need to create, say 10 further w/s 'Vendor1' to 'Vendor10' other times maybe 50 w/s. or more.
After these new w/s are created they will be manually renamed to the name of the actual vendor - so this naming convention of Vendor1 etc, will not cause problems with existing named worksheets.
However, the position in the sequence of 'Last' will obviously change as new w/s are added so the VBA would need to take this into account.
Count Rows Between Occurrences In Multiples Columns
Dec 24, 2006How do I create a code that record on row 1012, starting with column N, will count the number of rows between each "0" record in the range F7:F106. Perform the same function for number "0" in the range G7:G106 and recording in N1013.
Perform the same function for number "0" in the range H7:H106 and recording in N1014. Perform the same function for number "0" in the range F7:H106 and recording in N1015.
Create Table Of Dimensions With Multiples Of Variables
Oct 11, 2007I am trying to create a spreadsheet containing a table of dimensions that are multiples of up to six loadable variables. I work for a stainless steel tank manufacturer. The body of tanks are formed from coil stock of varying widths. Typically these might be 1200mm, 1500mm, 2000mm and possibly 1800mm as well as the imperial equivalents. This could mean up to eight variables but in reality all are unlikely at any one given time.
We are told the volume that the tank is required to contain and a target preferred diameter. The theoretical height is therefore derived from this information. But now comes the tricky bit. It is desirable, to minimise cost of welding by minimising the number of strakes or wrappers. Can anyone give me a formula or whatever that can be used to do this and hopefully generate a table of close heights up to say 40 meters. Thus allowing an operator to select from say five presented options.
I have a table in a spreadsheet that the three principal widths of 1200mm 1500mm and 2000mm generate. It was created for me a while ago by a gentleman working at the Amsterdam Museum that I’m happy to send for perusal. The trouble is he never told me how he did it and no matter how hard I try, I cannot discover the method or formula. The first column gives the total combined height, the second the number of 1200mm wrappers, the third the number of 1500mm and the last the number of 2000mm. It is that simple
How To Use Design Mode To Create Button For Multiples Macros
Mar 26, 2014Is it possible to use design mode to create a button for multiples macros?
What i want to do is create like a list, and every selection run a different macro. I have a report that i want to use macro to make different filter selections, it would be about 20 different filters combination, so 20 buttons would be a mess... Is that possible or can i do it in another way?
And is possible to link the filter value to a different cell?
Cells To Be Able To Only Allow Multiples Of Fifty And A Message To Pop Up Of Invalid Entry For Everything Else
Apr 19, 2009I need cells to be able to only allow multiples of fifty and a message to pop up of invalid entry for everything else.
View 9 Replies View RelatedUserform Verification (avoid Multiples In A User-driven/created Database.)
Feb 15, 2010I would like to add a piece of code into the user form that will check and verify if a part has already been added so as to avoid multiples in a user-driven/created database.
here is a repost of the current code i am using for the user form (I have posted it before in another thread .. Blane245 helped me out with a different question I had)
Top 10 Percentages
Jul 20, 2009I am working with a list and would like to show the top 10 careers in %.
Out of 914 votes __ % are interested in Nursing, __ % are interested in ABC, ___ % DEF, etc.
Look Up Using Percentages
Dec 4, 2009i have a figure of 395.00 euros to start and need to calculat percentages when i enter a certain figure ...
View 8 Replies View RelatedVBA Round Function Vs Worksheet Round Function
Oct 24, 2006I don't know if there is a setting I'm missing or I'm going mad but when I use the round function in VBA it doesn't round.
I am using Excel 2000. See the example attached.
In the cell A2 I have a value 0.525, cell B2 has a formula "=round(A2,2)" which = 0.53, but cell C2 is assigned via VBA ie
Sheet1.Cells(2, 3).Value = Round(Sheet1.Cells(2, 1).Value, 2)
and the result is 0.52??
Calculating Percentages
Mar 10, 2009I think a really easy no brianer, I need to find the difference in percentage terms of two values. I am using =(B2-A2)/ABS(A2)
where B2 = 24.09
and A2 = 21.08
Annualised Percentages
Oct 15, 2009I am monitoring the balance in my Allocated Pension fund, via the WWW.
In particular, I am recording the profits (disregarding costs, outflows, etc.) as ANNUALISED PERCENTAGES (a new line, for each week).
My formula is:
=(accumulated profits/principal)*(365/elapsed days)
Questions:
Will my formula remain valid, when “elapsed days” exceed 365?
If not, is there a FUNCTION that can handle my problem. And
What would the function’s ARGUMENTS be?
Calculating Percentages ...
Jul 26, 2006I'm sure this will be an easy calculation for most of you...........
If I have two numbers, ie. 390 and 217, how can I calculate the difference
between the two figures as a percentage? (These two figures represent sales
in two months and I need to know the difference in percentage terms).
Highlight Only Percentages
Mar 14, 2012I would like a way to use conditional formatting to highlight percentages that are over 50%. The problem is that I have other numbers in the same column that are not percentages but I would like to ignore them for highlighting purposes? Can this be done without sorting the columns?
eg.
345- ignore
Ken- ignore
2500- ignore
45.6%- do not highlight
65- ignore
92%- highlight