SUMPRODUCT Equation Based On Multiples

Mar 4, 2009

to create the following formula which I'm now repeating in more elaborate forms. At the moment I am using the formula below but I need to get the bit in red in the second half of the formula to search on more than the one condition.

Currently it is searching a postcode abbreviation field and is picking up all those with 'BS' however I don't just want to search on BS. I would like to search on BS, BA, SN, TA, GL. I have tried putting different combination using commas and plus signs etc in but excel doens't seem to like the way I'm doing it.

=SUMPRODUCT(--(Sheet1!$T$3:$T$10000=A49),--(Sheet1!$S$3:$S$10000="BS"))

View 9 Replies


ADVERTISEMENT

Calculate A Multi-variable Equation Based Off Of Data In A Table With Different Criteria

Jan 8, 2010

I'm trying to calculate a multi-variable equation based off of data in a table with different criteria. If you reference the attached spreadsheet I am trying to calculate cost based on weight and zone. For the data entered in cells B1 and B2 944.01 would be the cost. If you look at the table in G2:N3 you'll notice that the values in G2 and G3 are the weight limits G2 is from 0-4999 and G3 is 5000+, this should impact where the value in B1 falls. B2 should select from H1 to N1.

View 3 Replies View Related

Macro Or Equation To Have Cell Turn Red / Green Based On Value Of Another Cell?

Oct 23, 2013

I am attempting to create a ROI calculator for my place of work. I want a blank cell to fill in green or red based a cell below it being equal or greater than 5.0%. What is the Macro or equation to do that?

View 5 Replies View Related

VLOOKUP With Multiples

Feb 4, 2014

I have attached an example. on the "master" sheet in column L I need a vlookup which will look up the information in column I & J and return the appropriate amount for that from column C of the "sheet3" tab. If there is nothing it should just return 0.

Sample Macro jscalem.xlsx

View 4 Replies View Related

Multiples Of A # Formula..

Oct 13, 2008

Is it possible to have a forumla that gives a True or False (perferably if it's possible for a conditional formatting to change colors) for multiples of a number. I would input a number in the cell and it would change the cell color if it not a multiple of say for example 13.

View 5 Replies View Related

Rounding By Varying Multiples?

Feb 27, 2014

I need to be able to round a given number (stock required) up to the next multiple of another number (pack size), as in the attached example.

Also, is there a way I can round to the closest multiple, ie either up or down, depending on which multiple is closer? I haven't decided which way I want to go yet!

View 3 Replies View Related

Round Percentages (Up And Down) By Multiples Of 5%

Sep 29, 2009

How do I round percentages, both up and down, to the nearest 5%?

Ex. 82% to 80% as well as 84% to 85%

View 4 Replies View Related

Output Data In Multiples Of X?

Aug 5, 2013

I need the output in B1 to be in multiples of the value in A1, rounded up.

example:
Value in A1 is 6
random formula in B1: =IF(AND(N2>$AA$1,S2>0),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2>$AA$1,S2=""),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2<$AD$1,S2=""),ROUND((30/$AD$1)*AD2-Z2,0),IF(AND(N2<$AC$1,S2=""),ROUND((30/$AC$1)*AC2-Z2,0),IF(AND(N2<$AB$1,S2=""),ROUND((30/$AB$1)*AB2-Z2,0),IF(AND(N2=M2,N2<$AA$1,S2>0),ROUND(30*(AA2/N2)-Z2,0),IF(AND(N2<>M2,N2<$AA$1,S2>0),ROUND(AA2*(30/$AA$1)-Z2,0))))))))

So if the resulting value of my B1 formula is 2.33, I'd like to have the output be 6. If the resulting value is 14.55, I'd like the output to be 18.

View 2 Replies View Related

Delete Shiftup Multiples Of 25

Sep 17, 2009

Is ther a way to search a column from M9 down and delete all numbers that are not multiples of 25. Also delete shiftup column N with it? i.e.

From:
1200.......399
1225.......700
1250.......325
1260.......320
1274.......500
1275.......251
1300.......102
To:
1200.......399
1225.......700
1250.......325
1275.......251
1300.......102

View 9 Replies View Related

Pivot Chart Top Population Multiples

May 5, 2014

I'm trying to make a sales chart defining the top 6 most popular items I'm having a problem.

Attachment 316136

View 1 Replies View Related

Excel Return Multiples Cell Behind One?

Mar 8, 2014

I need to create a vlookup to find a cell and returns all cells that are underneath, in the example:

jicRD.jpg

I need to find the color and return all cells that are down

View 7 Replies View Related

Countif - Counting Multiples Of Same Value In Same Cell

Oct 3, 2012

I've got a head-scratcher here that no one in the office can figure out (at my level anyway). I'm trying to count multiples of the same value within the same cell. For instance, if one cell's value is:

2, 2, 4, 5

I need my '2' count column to return two '2's. I'm using a wildcard because the cells will contain the numbers 1-7, some multiple times, and usually in different orders. The wildcard formula I'm using only picks up one if multiples of the same value are entered in one cell. Here's the formula:

=COUNTIF($C$4:$AG$60, "*"&"2"&"*")+COUNTIF($C$4:$AG$60, "2")

This formula only returns a value of one in the '2' count column. It can't find the second '2' for some reason. I haven't been able to make COUNTA work either.

View 4 Replies View Related

Countifs In Multiples Sheets Calculation?

May 7, 2013

i have created a file for tracking my employee trandiness however, when i want to count the M, P, X ,L & AP keys which i already created it gives me OK for one month but when i tryied to calculate more than sheet "month" gives me error !! i used the below farmula :

=COUNTIFS(tblJanuary[@[1]:[31]],KeyPersonal)

how to calculated the above fx in every month. !!

View 5 Replies View Related

Converting Input Column Into Multiples

Jan 6, 2009

I know Excel quite well but this problem has me beaten and I have searched high and low to know avail.

I have an input column of departments and names which is ever-changing and currently I have hard-coded them into a spreadsheet to run a couple of drop down columns. However, I really want this to be automated and no longer hard-coded so that names are in the correct departments automatically.

View 9 Replies View Related

Values In Range 1, Multiples Of 10th

May 3, 2006

My question is presented, in details, in the attached file. Only Range 1 (B6:B15) should be generated by "Excel". (the numbers in Range 1 were typed by me as trials only...) (All other Ranges should not be touched). The values in Range 1 can be Multiples of 10th. only. (10, 20, 30, 40, etc....)

View 3 Replies View Related

Calculate Time Difference In Various Multiples

Oct 16, 2007

I am setting up a time and attendance system.

What I want to do is calculate the overtime that someone has worked but in multiples of 15 minutes.

Example, if someone worked 20 minutes over they would be paid for 15 minutes overtime.
If someone worked 31 minutes over they would be paid 30 minutes overtime.

The possible overtime someone could work in one day is 6 hours.

I want it to return the overtime in decimal numbers (e.g 0.25 for 15 minutes overtime).

I have attached a sample spreadsheet.

I would prefer this to be done in VBA if possible?

View 3 Replies View Related

Add Standard Set Of New Worksheets In Varying Multiples To Workbook

Feb 16, 2012

I would like to be able to add a standard set of new worksheets in varying multiples to my workbook from time to time.

How would I:

1. COPY the entire contents of a worksheet I've named 'Last' (content may be added to from time to time - so 'copy all' rather than a set range, so that:

2. Each worksheet created after 'Last' is named in turn 'Vendor1', 'Vendor2' etc

Sometimes I will need to create, say 10 further w/s 'Vendor1' to 'Vendor10' other times maybe 50 w/s. or more.

After these new w/s are created they will be manually renamed to the name of the actual vendor - so this naming convention of Vendor1 etc, will not cause problems with existing named worksheets.

However, the position in the sequence of 'Last' will obviously change as new w/s are added so the VBA would need to take this into account.

View 1 Replies View Related

Count Rows Between Occurrences In Multiples Columns

Dec 24, 2006

How do I create a code that record on row 1012, starting with column N, will count the number of rows between each "0" record in the range F7:F106. Perform the same function for number "0" in the range G7:G106 and recording in N1013.

Perform the same function for number "0" in the range H7:H106 and recording in N1014. Perform the same function for number "0" in the range F7:H106 and recording in N1015.

View 9 Replies View Related

Create Table Of Dimensions With Multiples Of Variables

Oct 11, 2007

I am trying to create a spreadsheet containing a table of dimensions that are multiples of up to six loadable variables. I work for a stainless steel tank manufacturer. The body of tanks are formed from coil stock of varying widths. Typically these might be 1200mm, 1500mm, 2000mm and possibly 1800mm as well as the imperial equivalents. This could mean up to eight variables but in reality all are unlikely at any one given time.

We are told the volume that the tank is required to contain and a target preferred diameter. The theoretical height is therefore derived from this information. But now comes the tricky bit. It is desirable, to minimise cost of welding by minimising the number of strakes or wrappers. Can anyone give me a formula or whatever that can be used to do this and hopefully generate a table of close heights up to say 40 meters. Thus allowing an operator to select from say five presented options.

I have a table in a spreadsheet that the three principal widths of 1200mm 1500mm and 2000mm generate. It was created for me a while ago by a gentleman working at the Amsterdam Museum that I’m happy to send for perusal. The trouble is he never told me how he did it and no matter how hard I try, I cannot discover the method or formula. The first column gives the total combined height, the second the number of 1200mm wrappers, the third the number of 1500mm and the last the number of 2000mm. It is that simple

View 4 Replies View Related

Sumproduct Formula Based On Criteria

Dec 26, 2013

I have a sumproduct formula based on some criteria, but I don't know how add another criteria wherein I need to exclude in the count if the date in column F is 1/1/2009

Attached excel file for reference. LE26dec.xlsx

View 5 Replies View Related

Round Total Time To One Hour Multiples With A Minimum Of Two

Apr 4, 2009

I need a basic formula that will take my start time from my end time and round it up to the next hour with a two hour minimum. I formated my cell to not have decimals and I tried to use round and roundup along with and if/then formula but no luck. If it makes any difference, all times are in 24hr format.

View 6 Replies View Related

How To Use Design Mode To Create Button For Multiples Macros

Mar 26, 2014

Is it possible to use design mode to create a button for multiples macros?

What i want to do is create like a list, and every selection run a different macro. I have a report that i want to use macro to make different filter selections, it would be about 20 different filters combination, so 20 buttons would be a mess... Is that possible or can i do it in another way?

And is possible to link the filter value to a different cell?

View 2 Replies View Related

Cells To Be Able To Only Allow Multiples Of Fifty And A Message To Pop Up Of Invalid Entry For Everything Else

Apr 19, 2009

I need cells to be able to only allow multiples of fifty and a message to pop up of invalid entry for everything else.

View 9 Replies View Related

SUMPRODUCT Of Columns Based On Matrix Position

Mar 20, 2009

I have created the following attachment to illustrate my problem. I have a square matrix -- say a 10x10 matrix (with data in B2:K11, and column headings on row 1, row headings on column A). I would like to get the sum of products of two columns in the result section below -- cells B14:K23, based on the position of the formula.

For example, cell B14 is the 1,1 item of the matrix so I would like to get the sumproduct of B2:B11 and B2:B11 (or SUMSQ(B2:B11) in this case); alternatively cell I16 is element 8,3 in the matrix so I need to get sumproduct of I4:I11 and D4:D11.
I tried the following formula using the OFFSET function (for cell B14 which is then copy/pasted throughout B14:K23)

View 5 Replies View Related

Sumproduct Based On Adjacent Cell ID Code

May 2, 2009

I am trying to get the sumproduct of a column of amounts based on the adjacent cells ID code.

For example column B will have codes 1FHD, 2FHS, 3FHG etc. these codes will be mixed otherwise I would have just did a sum of the cells.

Column C would have dollar amounts.

Sumproduct based on adjacent cell ID Code

View 6 Replies View Related

Multiple Date Based SUMPRODUCT Failing

Nov 18, 2009

I have the the need to show the sum of the product of sheet 2 on sheet 1 if several conditions are met.

The formula is working except for the first array:

=SUMPRODUCT(--(Bid_Circuits=$A2),--(Bid_Week_End=MONTH(D2)),--(Bid_Week_End=YEAR(D2)),--(Bid_Completed))

When I use XL's evaluate feature, XL seems to find the proper data yet returns #VALUE!

View 14 Replies View Related

Sumproduct :: Sum Data Based On Multiple Criteria..

Nov 8, 2007

I am trying to sum data based on multiple criteria..

The english version of the formula is Sum all refunds for Store during week

Original Data Format: ....

View 14 Replies View Related

Userform Verification (avoid Multiples In A User-driven/created Database.)

Feb 15, 2010

I would like to add a piece of code into the user form that will check and verify if a part has already been added so as to avoid multiples in a user-driven/created database.

here is a repost of the current code i am using for the user form (I have posted it before in another thread .. Blane245 helped me out with a different question I had)

View 7 Replies View Related

Sumproduct And Max: Caclulate The Max Number Based On Two Colomns Criteria

May 5, 2006

i'm trying to caclulate the max number based on two colomns criteria. For example if column A equal MC1 and column B equal 1 then find the max value of that group. I tried using sumproduct but so far it only works if i have one criteria wasn't too sure how to use it for two criterias. See attached file

View 3 Replies View Related

Define A Range For SumProduct Function Based On An If Statement?

May 31, 2006

I want to calculate a weighted average but I need it to only calculate on the months to date. I have a data validation drop down on a title page that is toggled to the current month each time a report is needed to define what months have actuals. I bring in data for all the months but only the current months have actuals. I need to calculate the weighted average on ONLY the ACTUALS. How can I set the ranges for sum product based on the data validation list on the title page?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved