My question is presented, in details, in the attached file. Only Range 1 (B6:B15) should be generated by "Excel". (the numbers in Range 1 were typed by me as trials only...) (All other Ranges should not be touched). The values in Range 1 can be Multiples of 10th. only. (10, 20, 30, 40, etc....)
View 3 RepliesI had 4 initial temperature values and after some time i got new temperature values. Now for calculating 2nd iteration i need to use new calculated values and for third iteration values from 2nd iteration is to be used and so on.
How to calculate temperature values directly for 10th iteration without solving each iteration?
I would like to have values from every 10th row in the table.
So I want to have B2, B11, B21 & so on...
In have 2 columns of data (temperature & gas evaloved) in A2..A200 and B2..B200
I use =INDEX(A2:A200,MATCH(MAX(B2:B200),B2:B200,0)) to find the
max value gas evolved in column B then read off the temperature from column A.
I now need to look down the list and take the 10th reading for temperature and gas evolved after the max gas evolved value in column B.
I've looked at the use of Index, Offset, Row & Match here on the forum in other posts but I juist cant seem to grasp it in my head what to do.
I'm using the following formula to find the 1st date that a particular rep wrote an order.
{=IF(S4="","",IF(MINA(IF('Daily Compliance'!$A$2:$A$5028=B4,'Daily Compliance'!$O$2:$O$5028))=0,"",MINA(IF('Daily Compliance'!$A$2:$A$5028=B4,'Daily Compliance'!$O$2:$O$5028))))}
I also need to figure out when they write their 10th order, but have had no success figuring that out.
where i copy up to 1000 products ID's like this: "1234567890 AA11111"(ofcourse there is allways differend code for every product its just a example :)) and paste it to exel, and the problem is i need only the 10-digit number (it's allways 10-digit number but the second one is sometimes diffrent) so it is possible to make makro that will remove every character after 10th character ?
View 6 Replies View RelatedI have attached an example. on the "master" sheet in column L I need a vlookup which will look up the information in column I & J and return the appropriate amount for that from column C of the "sheet3" tab. If there is nothing it should just return 0.
Sample Macro jscalem.xlsx
Is it possible to have a forumla that gives a True or False (perferably if it's possible for a conditional formatting to change colors) for multiples of a number. I would input a number in the cell and it would change the cell color if it not a multiple of say for example 13.
View 5 Replies View RelatedI need to be able to round a given number (stock required) up to the next multiple of another number (pack size), as in the attached example.
Also, is there a way I can round to the closest multiple, ie either up or down, depending on which multiple is closer? I haven't decided which way I want to go yet!
How do I round percentages, both up and down, to the nearest 5%?
Ex. 82% to 80% as well as 84% to 85%
I need the output in B1 to be in multiples of the value in A1, rounded up.
example:
Value in A1 is 6
random formula in B1: =IF(AND(N2>$AA$1,S2>0),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2>$AA$1,S2=""),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2<$AD$1,S2=""),ROUND((30/$AD$1)*AD2-Z2,0),IF(AND(N2<$AC$1,S2=""),ROUND((30/$AC$1)*AC2-Z2,0),IF(AND(N2<$AB$1,S2=""),ROUND((30/$AB$1)*AB2-Z2,0),IF(AND(N2=M2,N2<$AA$1,S2>0),ROUND(30*(AA2/N2)-Z2,0),IF(AND(N2<>M2,N2<$AA$1,S2>0),ROUND(AA2*(30/$AA$1)-Z2,0))))))))
So if the resulting value of my B1 formula is 2.33, I'd like to have the output be 6. If the resulting value is 14.55, I'd like the output to be 18.
Is ther a way to search a column from M9 down and delete all numbers that are not multiples of 25. Also delete shiftup column N with it? i.e.
From:
1200.......399
1225.......700
1250.......325
1260.......320
1274.......500
1275.......251
1300.......102
To:
1200.......399
1225.......700
1250.......325
1275.......251
1300.......102
I'm trying to make a sales chart defining the top 6 most popular items I'm having a problem.
Attachment 316136
I need to create a vlookup to find a cell and returns all cells that are underneath, in the example:
jicRD.jpg
I need to find the color and return all cells that are down
I've got a head-scratcher here that no one in the office can figure out (at my level anyway). I'm trying to count multiples of the same value within the same cell. For instance, if one cell's value is:
2, 2, 4, 5
I need my '2' count column to return two '2's. I'm using a wildcard because the cells will contain the numbers 1-7, some multiple times, and usually in different orders. The wildcard formula I'm using only picks up one if multiples of the same value are entered in one cell. Here's the formula:
=COUNTIF($C$4:$AG$60, "*"&"2"&"*")+COUNTIF($C$4:$AG$60, "2")
This formula only returns a value of one in the '2' count column. It can't find the second '2' for some reason. I haven't been able to make COUNTA work either.
i have created a file for tracking my employee trandiness however, when i want to count the M, P, X ,L & AP keys which i already created it gives me OK for one month but when i tryied to calculate more than sheet "month" gives me error !! i used the below farmula :
=COUNTIFS(tblJanuary[@[1]:[31]],KeyPersonal)
how to calculated the above fx in every month. !!
I know Excel quite well but this problem has me beaten and I have searched high and low to know avail.
I have an input column of departments and names which is ever-changing and currently I have hard-coded them into a spreadsheet to run a couple of drop down columns. However, I really want this to be automated and no longer hard-coded so that names are in the correct departments automatically.
to create the following formula which I'm now repeating in more elaborate forms. At the moment I am using the formula below but I need to get the bit in red in the second half of the formula to search on more than the one condition.
Currently it is searching a postcode abbreviation field and is picking up all those with 'BS' however I don't just want to search on BS. I would like to search on BS, BA, SN, TA, GL. I have tried putting different combination using commas and plus signs etc in but excel doens't seem to like the way I'm doing it.
=SUMPRODUCT(--(Sheet1!$T$3:$T$10000=A49),--(Sheet1!$S$3:$S$10000="BS"))
I am setting up a time and attendance system.
What I want to do is calculate the overtime that someone has worked but in multiples of 15 minutes.
Example, if someone worked 20 minutes over they would be paid for 15 minutes overtime.
If someone worked 31 minutes over they would be paid 30 minutes overtime.
The possible overtime someone could work in one day is 6 hours.
I want it to return the overtime in decimal numbers (e.g 0.25 for 15 minutes overtime).
I have attached a sample spreadsheet.
I would prefer this to be done in VBA if possible?
I would like to be able to add a standard set of new worksheets in varying multiples to my workbook from time to time.
How would I:
1. COPY the entire contents of a worksheet I've named 'Last' (content may be added to from time to time - so 'copy all' rather than a set range, so that:
2. Each worksheet created after 'Last' is named in turn 'Vendor1', 'Vendor2' etc
Sometimes I will need to create, say 10 further w/s 'Vendor1' to 'Vendor10' other times maybe 50 w/s. or more.
After these new w/s are created they will be manually renamed to the name of the actual vendor - so this naming convention of Vendor1 etc, will not cause problems with existing named worksheets.
However, the position in the sequence of 'Last' will obviously change as new w/s are added so the VBA would need to take this into account.
How do I create a code that record on row 1012, starting with column N, will count the number of rows between each "0" record in the range F7:F106. Perform the same function for number "0" in the range G7:G106 and recording in N1013.
Perform the same function for number "0" in the range H7:H106 and recording in N1014. Perform the same function for number "0" in the range F7:H106 and recording in N1015.
I am trying to create a spreadsheet containing a table of dimensions that are multiples of up to six loadable variables. I work for a stainless steel tank manufacturer. The body of tanks are formed from coil stock of varying widths. Typically these might be 1200mm, 1500mm, 2000mm and possibly 1800mm as well as the imperial equivalents. This could mean up to eight variables but in reality all are unlikely at any one given time.
We are told the volume that the tank is required to contain and a target preferred diameter. The theoretical height is therefore derived from this information. But now comes the tricky bit. It is desirable, to minimise cost of welding by minimising the number of strakes or wrappers. Can anyone give me a formula or whatever that can be used to do this and hopefully generate a table of close heights up to say 40 meters. Thus allowing an operator to select from say five presented options.
I have a table in a spreadsheet that the three principal widths of 1200mm 1500mm and 2000mm generate. It was created for me a while ago by a gentleman working at the Amsterdam Museum that I’m happy to send for perusal. The trouble is he never told me how he did it and no matter how hard I try, I cannot discover the method or formula. The first column gives the total combined height, the second the number of 1200mm wrappers, the third the number of 1500mm and the last the number of 2000mm. It is that simple
I need a basic formula that will take my start time from my end time and round it up to the next hour with a two hour minimum. I formated my cell to not have decimals and I tried to use round and roundup along with and if/then formula but no luck. If it makes any difference, all times are in 24hr format.
View 6 Replies View RelatedIs it possible to use design mode to create a button for multiples macros?
What i want to do is create like a list, and every selection run a different macro. I have a report that i want to use macro to make different filter selections, it would be about 20 different filters combination, so 20 buttons would be a mess... Is that possible or can i do it in another way?
And is possible to link the filter value to a different cell?
I need cells to be able to only allow multiples of fifty and a message to pop up of invalid entry for everything else.
View 9 Replies View RelatedI would like to add a piece of code into the user form that will check and verify if a part has already been added so as to avoid multiples in a user-driven/created database.
here is a repost of the current code i am using for the user form (I have posted it before in another thread .. Blane245 helped me out with a different question I had)
I have the following table:
Month / Year / Value
JAN20060,73
FEB20060,76
MAR20060,76
APR20060,76
MAY20060,73
JUN20060,69
JUL20060,69
AUG20060,73
SEP20060,76
OCT20060,75
NOV20060,74
DEC20060,72
JAN20070,67
FEB20070,68
MAR20070,71
APR20070,75
MAY20070,75
JUN20070,74
JUL20070,71
AUG20070,68
SEP20070,67
OCT20070,7
NOV20070,73
DEC20070,75
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies View Related