Is it possible to have a forumla that gives a True or False (perferably if it's possible for a conditional formatting to change colors) for multiples of a number. I would input a number in the cell and it would change the cell color if it not a multiple of say for example 13.
View 5 Replies
I have attached an example. on the "master" sheet in column L I need a vlookup which will look up the information in column I & J and return the appropriate amount for that from column C of the "sheet3" tab. If there is nothing it should just return 0.
Sample Macro jscalem.xlsx
I need to be able to round a given number (stock required) up to the next multiple of another number (pack size), as in the attached example.
Also, is there a way I can round to the closest multiple, ie either up or down, depending on which multiple is closer? I haven't decided which way I want to go yet!
How do I round percentages, both up and down, to the nearest 5%?
Ex. 82% to 80% as well as 84% to 85%
I need the output in B1 to be in multiples of the value in A1, rounded up.
example:
Value in A1 is 6
random formula in B1: =IF(AND(N2>$AA$1,S2>0),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2>$AA$1,S2=""),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2<$AD$1,S2=""),ROUND((30/$AD$1)*AD2-Z2,0),IF(AND(N2<$AC$1,S2=""),ROUND((30/$AC$1)*AC2-Z2,0),IF(AND(N2<$AB$1,S2=""),ROUND((30/$AB$1)*AB2-Z2,0),IF(AND(N2=M2,N2<$AA$1,S2>0),ROUND(30*(AA2/N2)-Z2,0),IF(AND(N2<>M2,N2<$AA$1,S2>0),ROUND(AA2*(30/$AA$1)-Z2,0))))))))
So if the resulting value of my B1 formula is 2.33, I'd like to have the output be 6. If the resulting value is 14.55, I'd like the output to be 18.
Is ther a way to search a column from M9 down and delete all numbers that are not multiples of 25. Also delete shiftup column N with it? i.e.
From:
1200.......399
1225.......700
1250.......325
1260.......320
1274.......500
1275.......251
1300.......102
To:
1200.......399
1225.......700
1250.......325
1275.......251
1300.......102
I'm trying to make a sales chart defining the top 6 most popular items I'm having a problem.
Attachment 316136
I need to create a vlookup to find a cell and returns all cells that are underneath, in the example:
jicRD.jpg
I need to find the color and return all cells that are down
I've got a head-scratcher here that no one in the office can figure out (at my level anyway). I'm trying to count multiples of the same value within the same cell. For instance, if one cell's value is:
2, 2, 4, 5
I need my '2' count column to return two '2's. I'm using a wildcard because the cells will contain the numbers 1-7, some multiple times, and usually in different orders. The wildcard formula I'm using only picks up one if multiples of the same value are entered in one cell. Here's the formula:
=COUNTIF($C$4:$AG$60, "*"&"2"&"*")+COUNTIF($C$4:$AG$60, "2")
This formula only returns a value of one in the '2' count column. It can't find the second '2' for some reason. I haven't been able to make COUNTA work either.
i have created a file for tracking my employee trandiness however, when i want to count the M, P, X ,L & AP keys which i already created it gives me OK for one month but when i tryied to calculate more than sheet "month" gives me error !! i used the below farmula :
=COUNTIFS(tblJanuary[@[1]:[31]],KeyPersonal)
how to calculated the above fx in every month. !!
I know Excel quite well but this problem has me beaten and I have searched high and low to know avail.
I have an input column of departments and names which is ever-changing and currently I have hard-coded them into a spreadsheet to run a couple of drop down columns. However, I really want this to be automated and no longer hard-coded so that names are in the correct departments automatically.
to create the following formula which I'm now repeating in more elaborate forms. At the moment I am using the formula below but I need to get the bit in red in the second half of the formula to search on more than the one condition.
Currently it is searching a postcode abbreviation field and is picking up all those with 'BS' however I don't just want to search on BS. I would like to search on BS, BA, SN, TA, GL. I have tried putting different combination using commas and plus signs etc in but excel doens't seem to like the way I'm doing it.
=SUMPRODUCT(--(Sheet1!$T$3:$T$10000=A49),--(Sheet1!$S$3:$S$10000="BS"))
My question is presented, in details, in the attached file. Only Range 1 (B6:B15) should be generated by "Excel". (the numbers in Range 1 were typed by me as trials only...) (All other Ranges should not be touched). The values in Range 1 can be Multiples of 10th. only. (10, 20, 30, 40, etc....)
View 3 Replies View RelatedI am setting up a time and attendance system.
What I want to do is calculate the overtime that someone has worked but in multiples of 15 minutes.
Example, if someone worked 20 minutes over they would be paid for 15 minutes overtime.
If someone worked 31 minutes over they would be paid 30 minutes overtime.
The possible overtime someone could work in one day is 6 hours.
I want it to return the overtime in decimal numbers (e.g 0.25 for 15 minutes overtime).
I have attached a sample spreadsheet.
I would prefer this to be done in VBA if possible?
I would like to be able to add a standard set of new worksheets in varying multiples to my workbook from time to time.
How would I:
1. COPY the entire contents of a worksheet I've named 'Last' (content may be added to from time to time - so 'copy all' rather than a set range, so that:
2. Each worksheet created after 'Last' is named in turn 'Vendor1', 'Vendor2' etc
Sometimes I will need to create, say 10 further w/s 'Vendor1' to 'Vendor10' other times maybe 50 w/s. or more.
After these new w/s are created they will be manually renamed to the name of the actual vendor - so this naming convention of Vendor1 etc, will not cause problems with existing named worksheets.
However, the position in the sequence of 'Last' will obviously change as new w/s are added so the VBA would need to take this into account.
How do I create a code that record on row 1012, starting with column N, will count the number of rows between each "0" record in the range F7:F106. Perform the same function for number "0" in the range G7:G106 and recording in N1013.
Perform the same function for number "0" in the range H7:H106 and recording in N1014. Perform the same function for number "0" in the range F7:H106 and recording in N1015.
I am trying to create a spreadsheet containing a table of dimensions that are multiples of up to six loadable variables. I work for a stainless steel tank manufacturer. The body of tanks are formed from coil stock of varying widths. Typically these might be 1200mm, 1500mm, 2000mm and possibly 1800mm as well as the imperial equivalents. This could mean up to eight variables but in reality all are unlikely at any one given time.
We are told the volume that the tank is required to contain and a target preferred diameter. The theoretical height is therefore derived from this information. But now comes the tricky bit. It is desirable, to minimise cost of welding by minimising the number of strakes or wrappers. Can anyone give me a formula or whatever that can be used to do this and hopefully generate a table of close heights up to say 40 meters. Thus allowing an operator to select from say five presented options.
I have a table in a spreadsheet that the three principal widths of 1200mm 1500mm and 2000mm generate. It was created for me a while ago by a gentleman working at the Amsterdam Museum that I’m happy to send for perusal. The trouble is he never told me how he did it and no matter how hard I try, I cannot discover the method or formula. The first column gives the total combined height, the second the number of 1200mm wrappers, the third the number of 1500mm and the last the number of 2000mm. It is that simple
I need a basic formula that will take my start time from my end time and round it up to the next hour with a two hour minimum. I formated my cell to not have decimals and I tried to use round and roundup along with and if/then formula but no luck. If it makes any difference, all times are in 24hr format.
View 6 Replies View RelatedIs it possible to use design mode to create a button for multiples macros?
What i want to do is create like a list, and every selection run a different macro. I have a report that i want to use macro to make different filter selections, it would be about 20 different filters combination, so 20 buttons would be a mess... Is that possible or can i do it in another way?
And is possible to link the filter value to a different cell?
I need cells to be able to only allow multiples of fifty and a message to pop up of invalid entry for everything else.
View 9 Replies View RelatedI would like to add a piece of code into the user form that will check and verify if a part has already been added so as to avoid multiples in a user-driven/created database.
here is a repost of the current code i am using for the user form (I have posted it before in another thread .. Blane245 helped me out with a different question I had)
I was wondering if there is a formla that will delete a formula when it has done its calculation, or stop the formula from constantly updating.
I've got a formula
=IF(COUNTA(A1)=1,TODAY(),"")
When something is typed in Cell A1 the cell with the formula will input todays date.
Is there a formula that will stop this formula from updating, as when you go into the file on a different day the date would have been updated.
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
I have an existing formula in a cell linking back to a start date only. determining how to add an additional formula to exclude weekends, and possibly holidays.
View 2 Replies View RelatedI am trying to use a combination of Concatenate and IF formula to produce an email.
My input.
D4: First Name:
D5: Middle Name:
D6: Last Name:
D8: Organization:
Once all these are filled, I want the formula to produce a result like
FirstName.M.LastName@Organization.com
I have used the following formula.
[Code] .....
Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.
FirstName..LastName@Organization.com
How do I remove the additional (.) in cases where there is no middle name.
Attached File : Email Generator.xlsx‎
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
Is it possible to write a formula that skips x number of cells and have the formula autoincrement as usual. For an examples lets say I want to skip 3 cells and I have entered in the cells listed:
A1= "1"
A2= "2"
A3= "3"
Then I type in the simple formula in the cell
B1= "=A1"
and then drag down but it skips 3 cells so then
B5= "=A2"
B9= "=A3"
If it didn't skip then
B1= "=A1"
B2= "=A2"
B3= "=A3"
this is just an example as I will be writing more complex formulas and need some thing that I can write into the formula so that it skips.
Something similar to this B1 "=A1(skip3cells)"
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
I have some student marks in columns B to F. If some one get below 40 marks he fails and the subject in which he has been failed will come in Remarks column. If he has passed in all subjects remarks column will show Pass.
To bring failed subject initial in Remarks i have to create 5 additional column and then thru Concatenate i joined them.
Is There any formula to show fail subject in Remarks column without creating 5 additional columns?
