Excel Return Multiples Cell Behind One?

Mar 8, 2014

I need to create a vlookup to find a cell and returns all cells that are underneath, in the example:

jicRD.jpg

I need to find the color and return all cells that are down

View 7 Replies


ADVERTISEMENT

Countif - Counting Multiples Of Same Value In Same Cell

Oct 3, 2012

I've got a head-scratcher here that no one in the office can figure out (at my level anyway). I'm trying to count multiples of the same value within the same cell. For instance, if one cell's value is:

2, 2, 4, 5

I need my '2' count column to return two '2's. I'm using a wildcard because the cells will contain the numbers 1-7, some multiple times, and usually in different orders. The wildcard formula I'm using only picks up one if multiples of the same value are entered in one cell. Here's the formula:

=COUNTIF($C$4:$AG$60, "*"&"2"&"*")+COUNTIF($C$4:$AG$60, "2")

This formula only returns a value of one in the '2' count column. It can't find the second '2' for some reason. I haven't been able to make COUNTA work either.

View 4 Replies View Related

Excel 2010 :: Return Range Of Cell Concatenated Based On Single Cell Value

Jul 2, 2012

I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:

Number of variable entered: 5

q9001
q9002
q9003
q9004
q9005
q9006
etc.

Should give me: "q9001 q9002 q9003 q9004 q9005"

I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.

(Using Excel 2010)

View 7 Replies View Related

Excel 2010 :: How To Return Value Of Cell Beneath A Cell With Specific Value

Jun 14, 2014

What I'm trying to do is, create a formula that works like vlookup, except I want to return the value of the cell that is a specified number of cells below the looked-up data in a single column array. So, let's say cell A1 reads "Bacon". In B1, I'd like to put a formula which searches the array for the cell that contains "Bacon" and then returns the value of the cell underneath, let's say the value is "Eggs". Then in C1, I'd like to put another formula which also looks up "Bacon" in the array, then returns the value of the cell that is down two cells from the cell that contains "Bacon", let's say the value is "Milk". And then in D1, a formula that returns the value 3 cells below "Bacon", and so on. All the values here will be text, and not sorted in any specific order. I'll be using Excel 2010.

Please take a look at the attached sheet if it clarifies things.

View 3 Replies View Related

VLOOKUP With Multiples

Feb 4, 2014

I have attached an example. on the "master" sheet in column L I need a vlookup which will look up the information in column I & J and return the appropriate amount for that from column C of the "sheet3" tab. If there is nothing it should just return 0.

Sample Macro jscalem.xlsx

View 4 Replies View Related

Multiples Of A # Formula..

Oct 13, 2008

Is it possible to have a forumla that gives a True or False (perferably if it's possible for a conditional formatting to change colors) for multiples of a number. I would input a number in the cell and it would change the cell color if it not a multiple of say for example 13.

View 5 Replies View Related

Rounding By Varying Multiples?

Feb 27, 2014

I need to be able to round a given number (stock required) up to the next multiple of another number (pack size), as in the attached example.

Also, is there a way I can round to the closest multiple, ie either up or down, depending on which multiple is closer? I haven't decided which way I want to go yet!

View 3 Replies View Related

Round Percentages (Up And Down) By Multiples Of 5%

Sep 29, 2009

How do I round percentages, both up and down, to the nearest 5%?

Ex. 82% to 80% as well as 84% to 85%

View 4 Replies View Related

Output Data In Multiples Of X?

Aug 5, 2013

I need the output in B1 to be in multiples of the value in A1, rounded up.

example:
Value in A1 is 6
random formula in B1: =IF(AND(N2>$AA$1,S2>0),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2>$AA$1,S2=""),ROUND((30/$AA$1)*AA2-Z2,0),IF(AND(N2<$AD$1,S2=""),ROUND((30/$AD$1)*AD2-Z2,0),IF(AND(N2<$AC$1,S2=""),ROUND((30/$AC$1)*AC2-Z2,0),IF(AND(N2<$AB$1,S2=""),ROUND((30/$AB$1)*AB2-Z2,0),IF(AND(N2=M2,N2<$AA$1,S2>0),ROUND(30*(AA2/N2)-Z2,0),IF(AND(N2<>M2,N2<$AA$1,S2>0),ROUND(AA2*(30/$AA$1)-Z2,0))))))))

So if the resulting value of my B1 formula is 2.33, I'd like to have the output be 6. If the resulting value is 14.55, I'd like the output to be 18.

View 2 Replies View Related

Delete Shiftup Multiples Of 25

Sep 17, 2009

Is ther a way to search a column from M9 down and delete all numbers that are not multiples of 25. Also delete shiftup column N with it? i.e.

From:
1200.......399
1225.......700
1250.......325
1260.......320
1274.......500
1275.......251
1300.......102
To:
1200.......399
1225.......700
1250.......325
1275.......251
1300.......102

View 9 Replies View Related

Excel 2010 :: Return Result For Appearance Of Text String In Any Cell In Row?

Jan 30, 2014

I deal with a rather large excel database (the range is A1:AV168266) that contains customer information. Some of these various customers are affiliated with a group called "ascend" and I need to be able to filter all my list by every customer affilliated with Ascend. The trouble is that the word "ascend" can appear in 8 different columns and usually when it appears in one column it doesn't appear in the others and their can also be more text in the cell beyond the word "ascend". I want to create a formula that will simply look for the word "ascend" in any cell of a row and return a result I can filter by. I will be putting the formula in column AW and put it in all 170,000 rows of that column, that way I can just filter by a single column.

I've played around with combining COUNTIF with SEARCH and MATCH with SEARCH but nothing seems to work.

View 7 Replies View Related

Pivot Chart Top Population Multiples

May 5, 2014

I'm trying to make a sales chart defining the top 6 most popular items I'm having a problem.

Attachment 316136

View 1 Replies View Related

Countifs In Multiples Sheets Calculation?

May 7, 2013

i have created a file for tracking my employee trandiness however, when i want to count the M, P, X ,L & AP keys which i already created it gives me OK for one month but when i tryied to calculate more than sheet "month" gives me error !! i used the below farmula :

=COUNTIFS(tblJanuary[@[1]:[31]],KeyPersonal)

how to calculated the above fx in every month. !!

View 5 Replies View Related

Converting Input Column Into Multiples

Jan 6, 2009

I know Excel quite well but this problem has me beaten and I have searched high and low to know avail.

I have an input column of departments and names which is ever-changing and currently I have hard-coded them into a spreadsheet to run a couple of drop down columns. However, I really want this to be automated and no longer hard-coded so that names are in the correct departments automatically.

View 9 Replies View Related

SUMPRODUCT Equation Based On Multiples

Mar 4, 2009

to create the following formula which I'm now repeating in more elaborate forms. At the moment I am using the formula below but I need to get the bit in red in the second half of the formula to search on more than the one condition.

Currently it is searching a postcode abbreviation field and is picking up all those with 'BS' however I don't just want to search on BS. I would like to search on BS, BA, SN, TA, GL. I have tried putting different combination using commas and plus signs etc in but excel doens't seem to like the way I'm doing it.

=SUMPRODUCT(--(Sheet1!$T$3:$T$10000=A49),--(Sheet1!$S$3:$S$10000="BS"))

View 9 Replies View Related

Values In Range 1, Multiples Of 10th

May 3, 2006

My question is presented, in details, in the attached file. Only Range 1 (B6:B15) should be generated by "Excel". (the numbers in Range 1 were typed by me as trials only...) (All other Ranges should not be touched). The values in Range 1 can be Multiples of 10th. only. (10, 20, 30, 40, etc....)

View 3 Replies View Related

Calculate Time Difference In Various Multiples

Oct 16, 2007

I am setting up a time and attendance system.

What I want to do is calculate the overtime that someone has worked but in multiples of 15 minutes.

Example, if someone worked 20 minutes over they would be paid for 15 minutes overtime.
If someone worked 31 minutes over they would be paid 30 minutes overtime.

The possible overtime someone could work in one day is 6 hours.

I want it to return the overtime in decimal numbers (e.g 0.25 for 15 minutes overtime).

I have attached a sample spreadsheet.

I would prefer this to be done in VBA if possible?

View 3 Replies View Related

Excel Function To Return Nearest Non Blank Cell Value From Rectangular Array Of Cells

Jan 10, 2014

Assume you have a rectangular range. Say A1:M18. There are values in some random cells (any number of cells) within the range. The rest of cells are blank. In cell M19 (ie cell below the bottom right corner of the range), I need a excel function that returns the nearest (ie physical location) non blank cell value. I have searched the internet for weeks. The closest formula is the following (see below) but it is flawed as it returns zero if there are values in rows below the row of the nearest cell with non blank...and also zero if there is value in a column greater than the column of the nearest cell with non blank.

Closest formula so far:
INDEX(A1:M18,LARGE(IF(ISBLANK(A1:M18),"",ROW(A1:M18)),1)-ROW(A1:M18)+1,LARGE(IF(ISBLANK(A1:M18),"",COLUMN(A1:M18)),1)-COLUMN(A1:M18)+1).

And the function should be relative not absolute as the range can be extended..but the location of the formula remain same relative to the array size. (ie. always at below the right bottom cell).

NOTE: Ignore the special case where two non blank cells are the nearest. That will not happen.

View 5 Replies View Related

Add Standard Set Of New Worksheets In Varying Multiples To Workbook

Feb 16, 2012

I would like to be able to add a standard set of new worksheets in varying multiples to my workbook from time to time.

How would I:

1. COPY the entire contents of a worksheet I've named 'Last' (content may be added to from time to time - so 'copy all' rather than a set range, so that:

2. Each worksheet created after 'Last' is named in turn 'Vendor1', 'Vendor2' etc

Sometimes I will need to create, say 10 further w/s 'Vendor1' to 'Vendor10' other times maybe 50 w/s. or more.

After these new w/s are created they will be manually renamed to the name of the actual vendor - so this naming convention of Vendor1 etc, will not cause problems with existing named worksheets.

However, the position in the sequence of 'Last' will obviously change as new w/s are added so the VBA would need to take this into account.

View 1 Replies View Related

Count Rows Between Occurrences In Multiples Columns

Dec 24, 2006

How do I create a code that record on row 1012, starting with column N, will count the number of rows between each "0" record in the range F7:F106. Perform the same function for number "0" in the range G7:G106 and recording in N1013.

Perform the same function for number "0" in the range H7:H106 and recording in N1014. Perform the same function for number "0" in the range F7:H106 and recording in N1015.

View 9 Replies View Related

Create Table Of Dimensions With Multiples Of Variables

Oct 11, 2007

I am trying to create a spreadsheet containing a table of dimensions that are multiples of up to six loadable variables. I work for a stainless steel tank manufacturer. The body of tanks are formed from coil stock of varying widths. Typically these might be 1200mm, 1500mm, 2000mm and possibly 1800mm as well as the imperial equivalents. This could mean up to eight variables but in reality all are unlikely at any one given time.

We are told the volume that the tank is required to contain and a target preferred diameter. The theoretical height is therefore derived from this information. But now comes the tricky bit. It is desirable, to minimise cost of welding by minimising the number of strakes or wrappers. Can anyone give me a formula or whatever that can be used to do this and hopefully generate a table of close heights up to say 40 meters. Thus allowing an operator to select from say five presented options.

I have a table in a spreadsheet that the three principal widths of 1200mm 1500mm and 2000mm generate. It was created for me a while ago by a gentleman working at the Amsterdam Museum that I’m happy to send for perusal. The trouble is he never told me how he did it and no matter how hard I try, I cannot discover the method or formula. The first column gives the total combined height, the second the number of 1200mm wrappers, the third the number of 1500mm and the last the number of 2000mm. It is that simple

View 4 Replies View Related

Excel 2013 :: Check Cell For Text And Return Corresponding Text In Adjacent Cell?

Jan 28, 2014

I have 2 tabs in a 2013 workbook. Inventory Receipts and lookups. One of the Data verification lookups I have is a drop down list in each cell in Column B (eg: Cat, Dog, Mouse) In the lookups tab I have another cell range containing the sounds (eg: Meow, Bark, Squeak).

What I am trying to acheive is, if B2 contains Cat, then return Meow in B3, if B2 contains Dog then return bark in b3 and if B2 contains Mouse return squeak in B3. Ideally I would like the formula to return the text from my lookup sheet (eg: 'Lookups'!C2,'Lookups'!C3,'Lookups'!C4). So depending on which option they choose from my animal drop down list .. the correct noise would automatically fill in.

View 9 Replies View Related

Round Total Time To One Hour Multiples With A Minimum Of Two

Apr 4, 2009

I need a basic formula that will take my start time from my end time and round it up to the next hour with a two hour minimum. I formated my cell to not have decimals and I tried to use round and roundup along with and if/then formula but no luck. If it makes any difference, all times are in 24hr format.

View 6 Replies View Related

How To Use Design Mode To Create Button For Multiples Macros

Mar 26, 2014

Is it possible to use design mode to create a button for multiples macros?

What i want to do is create like a list, and every selection run a different macro. I have a report that i want to use macro to make different filter selections, it would be about 20 different filters combination, so 20 buttons would be a mess... Is that possible or can i do it in another way?

And is possible to link the filter value to a different cell?

View 2 Replies View Related

Cells To Be Able To Only Allow Multiples Of Fifty And A Message To Pop Up Of Invalid Entry For Everything Else

Apr 19, 2009

I need cells to be able to only allow multiples of fifty and a message to pop up of invalid entry for everything else.

View 9 Replies View Related

Excel 2007 :: Formula To Return First Cell Reference In Another Cell Formula

Oct 1, 2011

Version: Excel 2007 WinXP

I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.

Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:

Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)

I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.

Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's

Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.

View 2 Replies View Related

Userform Verification (avoid Multiples In A User-driven/created Database.)

Feb 15, 2010

I would like to add a piece of code into the user form that will check and verify if a part has already been added so as to avoid multiples in a user-driven/created database.

here is a repost of the current code i am using for the user form (I have posted it before in another thread .. Blane245 helped me out with a different question I had)

View 7 Replies View Related

Excel 2010 :: Match 1 Cell And Column In Sheet 1 To 2 Columns In Sheet 2 Return Data From A 3rd

Jul 23, 2012

I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.

My attempt is in cell D2 on sheet1.

View 5 Replies View Related

How To Return Address Of Column Or Cell Select Not Just Return Value

Aug 18, 2014

How to return address of the column or cell I selected from Application.Inputbox, not just return the value?

[Code] ....

View 8 Replies View Related

Formula: If Value Return Is = To Value Of Cell Above Then Find Return Next Value

Feb 17, 2010

Is there a way with the following formula to tell it that if value return is = to value of cell above then find return next value?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved