I have a variable called "MinVal" which is an integer. Does anyone know the correct code for rounding this integer to the nearest multiple of 5 (or 10)? I need to do this in VBA, not on the Excel worksheet.
View 4 RepliesI'm trying to round off my numbers to specific integers. Sorta like a step function (in algebraic terms).
For example, my first few integers are 0-8-13. I want: 0<=X<8, 8<=X<13, etc.
So far, this is what I have: ...
I am trying to round similar to Banker's Rounding or Scientific Rounding but I can't find a consistent formula that works perfect with decimals.
Using three decimal places for all the samples, I can get 0.0785 to round to 0.078 but 0.1785 wants to round to 0.179 instead of staying 0.078. Or 0.0005 will round to 0 but 0.5115 wants to round to 0.511 instead of 0.512.
Here is a list of sample numbers along with desired results:
.0785 should be .078
.5115 should be .512
.5035 should be .504
.0005 should be 0
.0025 should be .002
.0194 should be .019
.0195 should be .02
.0135 should be .014
.0115 should be .012
.8115 should be .812
I cannot find a formula which gives me all of these results. Here is a list of the formulas I have tried so far (NOTE: cell A2 is the working cell in my worksheet where I enter the number to be rounded)
1) =MROUND(A2,0.001)
3) =ROUND(A2,3)
4) =IF(ISERROR(IF(MOD(MID(A2,4,1),2)=1,CEILING(A2,0.001),FLOOR(A2,0.001))),0,IF(MOD(MID(A2,4,1),2)=1,CEILING(A2,0.001),FLOO R(A2,0.001)))
5) =EVEN(A2)
6) =ROUNDUP(A2,3)
7) =ROUNDDOWN(A2,3)
I am trying to add some numbers only if they are integers/numbers. My condition goes like this:
IF((rangeA)=Numbers,SUM(rangeA),"One or more values not available")
I came up with this formula, but it gives me an error.
=IF(ISNUMBER(P5;Z5;BL5;BN5;BP5;AS5;AV5;EU5;FI5;GH5;GK5;GN5;GX5;HE5;HR5);SUM(P5;Z5;BL5;BN5;BP5;AS5;AV5;EU5;FI5;GH5;GK5;GN5;GX5;HE5;HR5);"One ore more values not available")
It says I have given many arguments for ISNUMBER function.
The only way I can find under "Conditional Formatting" to highlight round numbers is to set a formula.
View 1 Replies View RelatedAccording to Microsoft in Visual Basic an Integer can contain -2,147,483,648 to 2,147,483,647.
Yet when I store 5,000,000 to an integer I get an overflow error.
A user would input 4 integers.
How can I generate a list of all possible combinations of the integers?
I am using to rotate through different values of 2 variables. The macro was created by a friend of mine 2 years ago so I need to modify it. The macro is quite usable so I hope someone will benefit from it. The problem with it is doesn’t rotate through a range of integers but only from zero to some number. In other words it allows to specify only the right hand of the range through which it will rotate (for example, from 0 to 100 or from 0 to 20 for A). The second issue with it is that it adds a difference number (“dif”, e.g. 3) to the start of the second variable’s range and starts only from there (from 3 to 100 for B). The third issue is that it doesn’t allow to rotate through a third variable (“C”) as you will see in my example. I am working on a task which requires precise definition of the ranges through which the macro will rotate and also the ability to rotate through a third variable. Need to modify it so that all the three imperfections are removed from it? Or maybe there are ready made macros freely available which allow to do just that?
View 34 Replies View RelatedI have a set on 300 values and I want to sum the 290 smallest numbers. Is the a function or combination of functions that can give me that result?
View 3 Replies View RelatedI recently had a major system crash. Took me a couple of hot stops and starts to get my XP professional to behave. It seemed to sort itself out and all is now working fine except that is for excel 2010 part of office 2010 personal and business. I first installed Office 2010 in January this year and it has all worked fine. Now Excel spread sheets behave as follows - even those that were created before the system crashes mentioned above. If I enter integer 1 in any cell and press accept the entry becomes '0.01'. If I enter 1.0 the entry becomes 1 when accept pressed. I have repaired the Office suite. I have removed and reload the Office suite. I have tested numbers in Word and on the calculator and both work correctly - so my question is simple - How do I make Excel once again accept that a single digit should be taken at value and not convert it to tenths?
[URL]
Suppose you have 3 variant Arrays, named sArrPos1, sArrPos2, and sArrPos3.
What is the syntax for using an integer variable to specify which of the three to work with?
E.g.
[Code] ......
I want to work with sArrPos1 first, then sArrPos2, then sArrPos3, but can't hard type them.
I needed to convert PartNumber to a string using Cstr(PartNumber).
The following VB code searches an Excel spreadsheet for a Production Order and then looks for a Part Number in the corresponding row. The Production Order can be listed multiple times, but there is only 1 Production Order/Part Number combo. When searching for the Part Number, it will find letters, numbers with a dash and letter/number combos, but won't find integers.
For example, it will find ABC, 3500-01 and T1000, but not 200.
is it possilble to extract integers from a text string within a cell?
Eg.
Cell A1 - "ABC 123"
I want to extract the "123" from cell A1.
I have many text strings from which I need to extract the integers from.
The trouble is that each text string does not follow a consistent order, so I
cannot use text functions such as LEFT, MID or RIGHT to extract what i need.
I have a set of values as below from (r1,c1) to (r6,c1)
-2.1
-1.6
-0.3
0.3
1.5
2.9
I want to find the smallest positive value of the given values.(output should be 0.3) ....
I have a lot of lists of integers and I want to sum their Xth power automatically, for X = -3, -2, -1, -1/2, 0, 1/2, 1, 2, 3, 4, 5, 6.
For example, take this short list of integers: 1 2 3 4 6 12
The sum of their Xth power must be: 1^X + 2^X + 3^X + 4^X + 6^X + 12^X
How can I do that?
I need to declare a two dimensional array that will return the Row and the cell's string value. My only solution is to return the row as a string like this.
Public GlobalArray(2, 100) As String
How to get more control than this? Maybe I should just declare it as a variant but this might open it up for problems later.
I am experimenting with solver and have attached an example of my problem.
A3:A12 contains a list of numbers from 1 to 10. B3:B12 are my cells I wish to change to be either 1 or 0. If a cell in column B equals 1 then it multiplies the corresponding number in column A by 1 and puts the result in column C. Column C is summed up in cell C14.
My solver settings are below: ...
I have a comma delimited CSV file that holds about 2 millions rows of data (a lot I know but it's the only format I can work with unfortunately). One of the rows has some numbers in it that have lots of decimal places (like 3.908651901). I need to round that entire column - all 2 million rows - to whole integers.
The problem is that when I open it in excel it says something like "only 1 million rows shown". After more investigation I have found out that excel cannot handle more than 1 millions rows at a time.
My question is this: If I select the whole column and round the numbers to integers will that apply to the entire 2 millions rows? Or only the 1 million showing in excel?
Are there any other programs available that can handle 2-2.5 million rows and change the column to whole integers?
I have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:
Text box = NumberBox
Spin button= NumberSpin
I've a big problem getting the Constraints in excel solver to use variables.
It seems that the only accepted variable type in the contraints are STRING variables. THe following simple example works AS LONG AS the variable apa is a STRING value and as long as it doesn't contain decimals....
So the question is. How to use varialbes in the FormulaText argement other than string values as integers?
I am attempting to multiply the value of strings/integers for an output in a function macro. I know it's a simple question, but a simple answer would be suffice. I'm in the middle of a massive brain fart...
View 6 Replies View RelatedI have tracked down an overflow Error 6 to the following line:
dMax = Int(s * DPoints / SPoints)
Where all variables are defined as Integers. The error goes away when I define s as Long, but I don't understand why this should be required since none of the individual variables ever exceed the scope of an Integer (-32768 to 32767).
Strangely, I get the same overflow problem when I type either of the following calculations in the immediate window:
? Int(328 * 100 / 1000)
? 328 * 100 / 1000
? 328 * 100
Note that no variables are defined, so why the overflow problem? Surely Excel/VBA should be able to work with this very basic calculation without any problem, by assigning the appropriate dimension, no?
Is this a known problem with Excel/VBA?
I am using Windows 7, with Excel 2010 (updated from 2009).
I have date fields as column labels in a pivot table. When I try to group them I'm only given the option to group by integers and not by months, years etc.
I've had a look at the format settings of the column and they are formatted as date fields.
What is the code to round up a range of numbers at certain decimal.
View 14 Replies View RelatedI have a sheet that i use for doing quotes for sound systems. i have a qty and price column that i input and then a column which gives me the overall total. ie qty 2 x unit amount 160.00 = 320.00 i also have a discount column that i use and a column that gives them the final price after discounts. so i will put 22% into my discount column and get 249.60 as my final price for the 2 items after the discount.
what i am wanting to do is "round up or down to the nearest 5.00 mark. so for instance, the final price in this case would be 250.00 is this possible?
I have a worksheet (Sheet1) that gets information from other sheets (1)
So in cell D7 I have the function ='1'!K33
K33 is from the Sheet labeled (1) obviously. Now the problem I am having is if the number 20.6, it automatically rounds up to 21. I need to number to round down to 20 regardless if its 20.1, or 20.9.
Since I already have a formula in D7, how do I still get the information from the other sheet but have the number round down for me. Is it possible?
Am currently calculating the total number of cartons used for different items with this formula:
=SUM(F99/352)+(H99/135)+(J99/110)+(L99/60)+(N99/28)
The divisors are the number of items in a carton.
Would like to round up each of the 5 subtotals in the above formula to the next full number, so that the total will be the sum of full numbers.
What would be the correct formula?
Cell "CostPerEvent" has the value .298896, and when I run the following statement I expect that A2 will contain the same value .298896, yet it is entered into the cell as .3
Cells(1, 2).Value = Range("CostPerEvent").Value
Is there some kind of implicit rounding going on? I rewrote the code to:
Cells(1, 2).Value = CDbl(Range("CostPerEvent").Value)
But I am curious whether this behavior is documented...
I have written a macro which includes a number of calculations. This has resulted in a value with a number of decimal places. I want this value rounded to 1 decimal place and this value written to a cell. How can i round this value correctly.
View 4 Replies View RelatedHow can I make excel display 321.165 as 321.16 when I have the cell format set to number and 2 decimal places instead of rounding it up to 321.17?
View 11 Replies View Related