On Data Entry Integers Become Tenths
Apr 12, 2013
I recently had a major system crash. Took me a couple of hot stops and starts to get my XP professional to behave. It seemed to sort itself out and all is now working fine except that is for excel 2010 part of office 2010 personal and business. I first installed Office 2010 in January this year and it has all worked fine. Now Excel spread sheets behave as follows - even those that were created before the system crashes mentioned above. If I enter integer 1 in any cell and press accept the entry becomes '0.01'. If I enter 1.0 the entry becomes 1 when accept pressed. I have repaired the Office suite. I have removed and reload the Office suite. I have tested numbers in Word and on the calculator and both work correctly - so my question is simple - How do I make Excel once again accept that a single digit should be taken at value and not convert it to tenths?
[URL]
View 6 Replies
ADVERTISEMENT
Mar 5, 2014
I am working on a set of data that has a two week time period and specific times of events throughout each day. The dates and times are in separate columns and the time is in 24 hour format HH:MM. I am trying to count the number of occurrences in tenths of the hour or six minute increments, so 1-6 would equal .1 - 7-12 would equal .2 and so on - I really would remove the decimal and just express the value as 1-10. I am then just trying to do a count of the number of occurences for each hour and each day to see where the occurences are grouping. I will then graph this result to see where the clusters occur
View 1 Replies
View Related
Sep 24, 2009
How do I get a straight conversion from h:mm to h:tenths? As soon as it hits 23:59, the clock start over in the tenths column. ie...39:27 should read 39.4. I'm currently using this formula: =(T10-INT(T10))*24
3:283.5
8:508.8
9:269.4
10:4210.7
12:5712.9
14:1214.2
39:2715.4
41:4217.7
59:5711.9
View 2 Replies
View Related
May 19, 2007
How do you format
Second(Now)
to display tenths, hundredths, or thousands of a second? Must be in code since it will never be applied to a cell.
View 4 Replies
View Related
Jun 6, 2006
I have a variable called "MinVal" which is an integer. Does anyone know the correct code for rounding this integer to the nearest multiple of 5 (or 10)? I need to do this in VBA, not on the Excel worksheet.
View 4 Replies
View Related
Jan 24, 2014
I am trying to add some numbers only if they are integers/numbers. My condition goes like this:
IF((rangeA)=Numbers,SUM(rangeA),"One or more values not available")
I came up with this formula, but it gives me an error.
=IF(ISNUMBER(P5;Z5;BL5;BN5;BP5;AS5;AV5;EU5;FI5;GH5;GK5;GN5;GX5;HE5;HR5);SUM(P5;Z5;BL5;BN5;BP5;AS5;AV5;EU5;FI5;GH5;GK5;GN5;GX5;HE5;HR5);"One ore more values not available")
It says I have given many arguments for ISNUMBER function.
View 6 Replies
View Related
Mar 6, 2012
The only way I can find under "Conditional Formatting" to highlight round numbers is to set a formula.
View 1 Replies
View Related
Mar 16, 2007
According to Microsoft in Visual Basic an Integer can contain -2,147,483,648 to 2,147,483,647.
Yet when I store 5,000,000 to an integer I get an overflow error.
View 9 Replies
View Related
Jan 19, 2009
A user would input 4 integers.
How can I generate a list of all possible combinations of the integers?
View 9 Replies
View Related
Nov 29, 2006
I am using to rotate through different values of 2 variables. The macro was created by a friend of mine 2 years ago so I need to modify it. The macro is quite usable so I hope someone will benefit from it. The problem with it is doesn’t rotate through a range of integers but only from zero to some number. In other words it allows to specify only the right hand of the range through which it will rotate (for example, from 0 to 100 or from 0 to 20 for A). The second issue with it is that it adds a difference number (“dif”, e.g. 3) to the start of the second variable’s range and starts only from there (from 3 to 100 for B). The third issue is that it doesn’t allow to rotate through a third variable (“C”) as you will see in my example. I am working on a task which requires precise definition of the ranges through which the macro will rotate and also the ability to rotate through a third variable. Need to modify it so that all the three imperfections are removed from it? Or maybe there are ready made macros freely available which allow to do just that?
View 34 Replies
View Related
Dec 4, 2012
I have a set on 300 values and I want to sum the 290 smallest numbers. Is the a function or combination of functions that can give me that result?
View 3 Replies
View Related
Jul 5, 2014
Suppose you have 3 variant Arrays, named sArrPos1, sArrPos2, and sArrPos3.
What is the syntax for using an integer variable to specify which of the three to work with?
E.g.
[Code] ......
I want to work with sArrPos1 first, then sArrPos2, then sArrPos3, but can't hard type them.
View 5 Replies
View Related
Dec 8, 2009
I needed to convert PartNumber to a string using Cstr(PartNumber).
The following VB code searches an Excel spreadsheet for a Production Order and then looks for a Part Number in the corresponding row. The Production Order can be listed multiple times, but there is only 1 Production Order/Part Number combo. When searching for the Part Number, it will find letters, numbers with a dash and letter/number combos, but won't find integers.
For example, it will find ABC, 3500-01 and T1000, but not 200.
View 3 Replies
View Related
Sep 28, 2005
is it possilble to extract integers from a text string within a cell?
Eg.
Cell A1 - "ABC 123"
I want to extract the "123" from cell A1.
I have many text strings from which I need to extract the integers from.
The trouble is that each text string does not follow a consistent order, so I
cannot use text functions such as LEFT, MID or RIGHT to extract what i need.
View 10 Replies
View Related
Jun 28, 2013
I have a set of values as below from (r1,c1) to (r6,c1)
-2.1
-1.6
-0.3
0.3
1.5
2.9
I want to find the smallest positive value of the given values.(output should be 0.3) ....
View 1 Replies
View Related
Nov 5, 2006
I'm trying to round off my numbers to specific integers. Sorta like a step function (in algebraic terms).
For example, my first few integers are 0-8-13. I want: 0<=X<8, 8<=X<13, etc.
So far, this is what I have: ...
View 5 Replies
View Related
Jun 13, 2014
I have a lot of lists of integers and I want to sum their Xth power automatically, for X = -3, -2, -1, -1/2, 0, 1/2, 1, 2, 3, 4, 5, 6.
For example, take this short list of integers: 1 2 3 4 6 12
The sum of their Xth power must be: 1^X + 2^X + 3^X + 4^X + 6^X + 12^X
How can I do that?
View 5 Replies
View Related
Jun 2, 2013
I need to declare a two dimensional array that will return the Row and the cell's string value. My only solution is to return the row as a string like this.
Public GlobalArray(2, 100) As String
How to get more control than this? Maybe I should just declare it as a variant but this might open it up for problems later.
View 3 Replies
View Related
Oct 19, 2007
I am experimenting with solver and have attached an example of my problem.
A3:A12 contains a list of numbers from 1 to 10. B3:B12 are my cells I wish to change to be either 1 or 0. If a cell in column B equals 1 then it multiplies the corresponding number in column A by 1 and puts the result in column C. Column C is summed up in cell C14.
My solver settings are below: ...
View 9 Replies
View Related
Mar 20, 2014
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
View 4 Replies
View Related
Apr 10, 2013
I have a comma delimited CSV file that holds about 2 millions rows of data (a lot I know but it's the only format I can work with unfortunately). One of the rows has some numbers in it that have lots of decimal places (like 3.908651901). I need to round that entire column - all 2 million rows - to whole integers.
The problem is that when I open it in excel it says something like "only 1 million rows shown". After more investigation I have found out that excel cannot handle more than 1 millions rows at a time.
My question is this: If I select the whole column and round the numbers to integers will that apply to the entire 2 millions rows? Or only the 1 million showing in excel?
Are there any other programs available that can handle 2-2.5 million rows and change the column to whole integers?
View 2 Replies
View Related
Jun 9, 2014
I have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:
Text box = NumberBox
Spin button= NumberSpin
View 4 Replies
View Related
Feb 9, 2009
I've a big problem getting the Constraints in excel solver to use variables.
It seems that the only accepted variable type in the contraints are STRING variables. THe following simple example works AS LONG AS the variable apa is a STRING value and as long as it doesn't contain decimals....
So the question is. How to use varialbes in the FormulaText argement other than string values as integers?
View 14 Replies
View Related
Nov 29, 2006
I am attempting to multiply the value of strings/integers for an output in a function macro. I know it's a simple question, but a simple answer would be suffice. I'm in the middle of a massive brain fart...
View 6 Replies
View Related
Jul 17, 2012
I have tracked down an overflow Error 6 to the following line:
dMax = Int(s * DPoints / SPoints)
Where all variables are defined as Integers. The error goes away when I define s as Long, but I don't understand why this should be required since none of the individual variables ever exceed the scope of an Integer (-32768 to 32767).
Strangely, I get the same overflow problem when I type either of the following calculations in the immediate window:
? Int(328 * 100 / 1000)
? 328 * 100 / 1000
? 328 * 100
Note that no variables are defined, so why the overflow problem? Surely Excel/VBA should be able to work with this very basic calculation without any problem, by assigning the appropriate dimension, no?
Is this a known problem with Excel/VBA?
I am using Windows 7, with Excel 2010 (updated from 2009).
View 9 Replies
View Related
May 12, 2013
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies
View Related
May 5, 2009
Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
View 14 Replies
View Related
Jul 15, 2009
I want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
View 14 Replies
View Related
Sep 11, 2013
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
View 3 Replies
View Related
Apr 23, 2013
is there a way to lock certain cells to allow data entry but not allow data to be removed.
View 2 Replies
View Related
