I have a set of values as below from (r1,c1) to (r6,c1)
-2.1
-1.6
-0.3
0.3
1.5
2.9
I want to find the smallest positive value of the given values.(output should be 0.3) ....
I am using to rotate through different values of 2 variables. The macro was created by a friend of mine 2 years ago so I need to modify it. The macro is quite usable so I hope someone will benefit from it. The problem with it is doesn’t rotate through a range of integers but only from zero to some number. In other words it allows to specify only the right hand of the range through which it will rotate (for example, from 0 to 100 or from 0 to 20 for A). The second issue with it is that it adds a difference number (“dif”, e.g. 3) to the start of the second variable’s range and starts only from there (from 3 to 100 for B). The third issue is that it doesn’t allow to rotate through a third variable (“C”) as you will see in my example. I am working on a task which requires precise definition of the ranges through which the macro will rotate and also the ability to rotate through a third variable. Need to modify it so that all the three imperfections are removed from it? Or maybe there are ready made macros freely available which allow to do just that?
View 34 Replies View RelatedPlease find the attached MS Excel 2010 file <average set.xlsx>.
There is set of positive set & negative set of values available in the Column A. The values are plotted against Column A in Column B. Light green are positive sets and light yellow are negative sets.
Now I want to calculate the average for the positive set & negative set of values as shown in light majenta in the cells F4:F9. Also all majenta cells to be plotted by formula.
The Column H and Column I also same as like above , but here negative set of numbers starts first.
I'm trying to define a range of values in two cells M1:M2; lookup that range of values in a three column array (K12:M600) and sum the values in column M12:M600 if they are positive values. I've been trying this formula:
=SUMIF(M12:M600,">0",(VLOOKUP(M1:M2,K12:M600,3,TRUE)))
but cannot seem to get it to work.
I've got numerical data in columns A through AF, starting in row 4. I need a formula, starting in AG4 that I can drag down. I need the formula to look back across the row until it gets to the last posistive number, then return the column header of that column (the column headers are in row 3)
so for example
Header row
Jan Feb Mar Apr May Jun Jul Aug
Data
0 3 0 0 8 0 0 0
the formula would return May in this example as 8 is the las positive value and the column header for that column is 8. There are no blank cells in the data.
I'm trying to count the number of times a payment is made within a certain set of dates. I believe that I should be using a countifs function, but I'm not exactly sure how to program it. I have a number of months, say the last 12. And in each month a payment is made or it isn't made.
View 6 Replies View RelatedI am creating a template in Excel 2010 and am having some issues due to a combination of positive and negative values. Specifically, I have a named range of values that can have either a positive or negative deviation from zero. I need to return the value that has the greatest deviation from zero (either + or -) based on criteria in another named range I have used the following array formula with success for the "Y" range:
{=IF(PRB=M1,INDEX(Y,MATCH(MAX(ABS(Y)),ABS(Y),0)),MAX(Y))}
However, if there are not any negative values, as in the "Z" range, it only returns MAX(Z) for the entire range, when I would like ti to return "0.00134" (the largest deviation from zero based on the PRB range criterai. Would this be better accomplished using VBA?
PRB
Y
Z
A90B90
A90B-90
[Code].....
I have a variable called "MinVal" which is an integer. Does anyone know the correct code for rounding this integer to the nearest multiple of 5 (or 10)? I need to do this in VBA, not on the Excel worksheet.
View 4 Replies View RelatedI am trying to add some numbers only if they are integers/numbers. My condition goes like this:
IF((rangeA)=Numbers,SUM(rangeA),"One or more values not available")
I came up with this formula, but it gives me an error.
=IF(ISNUMBER(P5;Z5;BL5;BN5;BP5;AS5;AV5;EU5;FI5;GH5;GK5;GN5;GX5;HE5;HR5);SUM(P5;Z5;BL5;BN5;BP5;AS5;AV5;EU5;FI5;GH5;GK5;GN5;GX5;HE5;HR5);"One ore more values not available")
It says I have given many arguments for ISNUMBER function.
The only way I can find under "Conditional Formatting" to highlight round numbers is to set a formula.
View 1 Replies View RelatedAccording to Microsoft in Visual Basic an Integer can contain -2,147,483,648 to 2,147,483,647.
Yet when I store 5,000,000 to an integer I get an overflow error.
A user would input 4 integers.
How can I generate a list of all possible combinations of the integers?
I have attached xl sheet for ref.
I have value in E2(5),F2(10)=G2(5[sub of F2-E2])
I need to find E2(5) value in B2:B21 and the same of F2 also
After finding that
(eg): E2 value 5 present in B6 cell and it should come to c6 cell same of F2 also
Now It should select C6 to C11 cells.(ref of B6 to B11,ie,5 to 10)
I tried in vba and formuals but i couldnt find solution.
I have a set on 300 values and I want to sum the 290 smallest numbers. Is the a function or combination of functions that can give me that result?
View 3 Replies View RelatedI recently had a major system crash. Took me a couple of hot stops and starts to get my XP professional to behave. It seemed to sort itself out and all is now working fine except that is for excel 2010 part of office 2010 personal and business. I first installed Office 2010 in January this year and it has all worked fine. Now Excel spread sheets behave as follows - even those that were created before the system crashes mentioned above. If I enter integer 1 in any cell and press accept the entry becomes '0.01'. If I enter 1.0 the entry becomes 1 when accept pressed. I have repaired the Office suite. I have removed and reload the Office suite. I have tested numbers in Word and on the calculator and both work correctly - so my question is simple - How do I make Excel once again accept that a single digit should be taken at value and not convert it to tenths?
[URL]
Suppose you have 3 variant Arrays, named sArrPos1, sArrPos2, and sArrPos3.
What is the syntax for using an integer variable to specify which of the three to work with?
E.g.
[Code] ......
I want to work with sArrPos1 first, then sArrPos2, then sArrPos3, but can't hard type them.
I needed to convert PartNumber to a string using Cstr(PartNumber).
The following VB code searches an Excel spreadsheet for a Production Order and then looks for a Part Number in the corresponding row. The Production Order can be listed multiple times, but there is only 1 Production Order/Part Number combo. When searching for the Part Number, it will find letters, numbers with a dash and letter/number combos, but won't find integers.
For example, it will find ABC, 3500-01 and T1000, but not 200.
is it possilble to extract integers from a text string within a cell?
Eg.
Cell A1 - "ABC 123"
I want to extract the "123" from cell A1.
I have many text strings from which I need to extract the integers from.
The trouble is that each text string does not follow a consistent order, so I
cannot use text functions such as LEFT, MID or RIGHT to extract what i need.
I'm trying to round off my numbers to specific integers. Sorta like a step function (in algebraic terms).
For example, my first few integers are 0-8-13. I want: 0<=X<8, 8<=X<13, etc.
So far, this is what I have: ...
I have a lot of lists of integers and I want to sum their Xth power automatically, for X = -3, -2, -1, -1/2, 0, 1/2, 1, 2, 3, 4, 5, 6.
For example, take this short list of integers: 1 2 3 4 6 12
The sum of their Xth power must be: 1^X + 2^X + 3^X + 4^X + 6^X + 12^X
How can I do that?
I need to declare a two dimensional array that will return the Row and the cell's string value. My only solution is to return the row as a string like this.
Public GlobalArray(2, 100) As String
How to get more control than this? Maybe I should just declare it as a variant but this might open it up for problems later.
I am experimenting with solver and have attached an example of my problem.
A3:A12 contains a list of numbers from 1 to 10. B3:B12 are my cells I wish to change to be either 1 or 0. If a cell in column B equals 1 then it multiplies the corresponding number in column A by 1 and puts the result in column C. Column C is summed up in cell C14.
My solver settings are below: ...
I have a comma delimited CSV file that holds about 2 millions rows of data (a lot I know but it's the only format I can work with unfortunately). One of the rows has some numbers in it that have lots of decimal places (like 3.908651901). I need to round that entire column - all 2 million rows - to whole integers.
The problem is that when I open it in excel it says something like "only 1 million rows shown". After more investigation I have found out that excel cannot handle more than 1 millions rows at a time.
My question is this: If I select the whole column and round the numbers to integers will that apply to the entire 2 millions rows? Or only the 1 million showing in excel?
Are there any other programs available that can handle 2-2.5 million rows and change the column to whole integers?
I have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:
Text box = NumberBox
Spin button= NumberSpin
I've a big problem getting the Constraints in excel solver to use variables.
It seems that the only accepted variable type in the contraints are STRING variables. THe following simple example works AS LONG AS the variable apa is a STRING value and as long as it doesn't contain decimals....
So the question is. How to use varialbes in the FormulaText argement other than string values as integers?
I am attempting to multiply the value of strings/integers for an output in a function macro. I know it's a simple question, but a simple answer would be suffice. I'm in the middle of a massive brain fart...
View 6 Replies View RelatedI have tracked down an overflow Error 6 to the following line:
dMax = Int(s * DPoints / SPoints)
Where all variables are defined as Integers. The error goes away when I define s as Long, but I don't understand why this should be required since none of the individual variables ever exceed the scope of an Integer (-32768 to 32767).
Strangely, I get the same overflow problem when I type either of the following calculations in the immediate window:
? Int(328 * 100 / 1000)
? 328 * 100 / 1000
? 328 * 100
Note that no variables are defined, so why the overflow problem? Surely Excel/VBA should be able to work with this very basic calculation without any problem, by assigning the appropriate dimension, no?
Is this a known problem with Excel/VBA?
I am using Windows 7, with Excel 2010 (updated from 2009).
Book1.xlsx
I have two sheets of data and two tables (1=finial 2=data comparison) I am trying to figure out some kind of formula or vba that can easily tell me that the location point in table one data comparison matches the location in table two. The VPMDFS (location footage) in table two or NDE data can be a range, say vpmdfs.NDE + or - 3 ft. so the ILI or source record should fall in between this range. Once the match has been made I need to copy and paste that record onto sheet one all in the same row. I have been scratching my head and researching for weeks and cannot come up with a simple solution. My problem with all the scenarios that I've tried is the formulas what the data in the data comparison sheet to already be in the same row. Please reference my attached work book for examples.
I want to be able to find all the 0 differences (i.e debit = credit) cut that group out of that sheet and paste it to a new sheet in the same workbook. I have the code to find the 0 difference but I don't know how to select the range that makes up that difference and cut and paste it to a new page.
View 2 Replies View RelatedI name a range "MyList".
In another cell, I use Data.Validation.List and use "MyList" as the source.
Now I find another range named "HisList". Is there some way to determine if "HisList" is being used as a source for some other validation somewhere in the workbook?
"Trace Dependents" doesn't work.