Row Adding With Formula In Protected Sheet
Feb 11, 2014
I'm trying to manage my Stock by using protected sheet, but i stuck with this "row adding with formula" stuff.
The user can only write in the colored cell, but everytime the user add new row, the formula doesn't copying by itself
I attach the file below with no password, if it's protected, the password is none, just press enter ( password : "" )
Book2.xls
View 5 Replies
ADVERTISEMENT
Feb 10, 2014
I have A TABLE (Named Table1) and some columns filled by formula. (Like E,F,G,H columns) When I protect the worksheet E,F,G,H columns are locked, but A,B,C,D columns are UNLOCKED. When is sheet PROTECTED , If I add a row bottom of Table1, does NOT automatically fill the E,F,G,H columns and Table1 range does not expanding. But, if UNPROTECTED, it's OK. when add a row bottom of Table1, automatically fill all columns with formula and table range is expanding aotomatically with new row.
When sheet is PROTECTED , How can I allow, to add a row and aouto fill all columns like unprotected.
And I want to protect sheet in any case, after allowing to add row.
I need a macro code to do this.
View 5 Replies
View Related
Jan 20, 2010
I have (several) worksheets that have protection enabled. I have unlocked all the cells that users need access to and locked all the column and row headers/labels.
When I enabled protection on the sheets, the ability to add comments was taken away.
Is there a way to add comments to an UNLOCKED cell in a PROTECTED worksheet?
View 5 Replies
View Related
Mar 19, 2012
I was hoping to force end users to use a user form to input data into a work sheet. The problem is that the form wont input the data when the sheet is protected.
View 2 Replies
View Related
Mar 29, 2014
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies
View Related
Mar 16, 2012
I have a table of data 300 rows long with protected formulas in adjacent columns and at the bottom of the column. Some of the data cells are blank but the non-blank cells are contiguous and start at the top of the range (see Before Example).
a macro that would allow users to insert a blank cell at any point in the data table without losing any of the other data or disrupting the formulas. In other words I want to move all the data from that point to the bottom of the range down by 1 row. A before and after example for a smaller 10 row data set is shown below.
Before
AB1data aformula 12data bformula 23data cformula 34data dformula 45data eformula 56data fformula 67 formula 78 formula 89 formula 910 formula 1011formula Aformula B
After
AB14data aformula 115data bformula 216data cformula 317data dformula 418data eformula 519 formula 620data fformula 721 formula 822 formula 923 formula 1024formula Aformula B
View 9 Replies
View Related
Feb 24, 2011
I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
View 4 Replies
View Related
Apr 29, 2014
I have spent ages creating a work diary and have protected the sheets using VBA however on finishing the sheet one important thing that needs to happen is the ability to copy and paste information from the boxes to another worksheet. i.e MONDAY - SUNDAY
View 1 Replies
View Related
Jan 18, 2008
Does anyone know if there is a way to unprotect a sheet. The person who created this spreadsheet no longer works for our company and although we can see the spreadsheet, the formulas are hidden so we can't figure out where the data is being pulled in from. Any ideas?
View 9 Replies
View Related
Jun 11, 2008
is there a code to still allow me to move between sheet tabs by using [alt] pg up or [alt] pg dn on a protected sheet?
View 9 Replies
View Related
Apr 26, 2007
What code would I use to test if the sheet is protected or not? In other words:
If Activesheet.Protection = True Then
MsgBox "You have no authority!!!"
Else
' Some code here
End If
View 5 Replies
View Related
Feb 11, 2010
I have a workbook whose worksheets use protection (don't want my calculations stomped on).
When the Protection is on, the search function does not work. You call it up, write what you are looking for, it accepts it, and then when you tell it to search it ignores you.
When you turn the protection off, the search function works just fine.
HOWEVER....Other workbooks I have with protection on its sheets do not share this problem, just this one workbook. And the problem is on all sheets in this workbook. The problem is not on any of the sheets in the other workbooks. I can't see anything different between them, but then I may not know what to look at.
View 2 Replies
View Related
Sep 4, 2013
I wanted to know:
Q1. How can we insert new rows in a protected sheet?
For example: In the attached sample protected excel sheet "insert rows.xlsx" , if for Employee ID and Name fields, the user has more no. of records than provided, how can he insert new rows considering the fact that Company ID and Name field are locked.
Or any way to address this issue via some other method like adding a scrollbar,etc.
View 5 Replies
View Related
Dec 20, 2007
I've locked certain columns on my worksheet so that users cannot overtype target dates etc. I've password protected the worksheet.
The password protection means that for some reason the users can't use the autofilters that are on the header row.
Can someone help me solve this problem; I still need the locked cells and password protection on the sheet but the success of the sheet depends on users being able to filter for specific rows using the autofilter....
View 9 Replies
View Related
Mar 27, 2009
I have protected several sheets in my workbook to protect the forumlas and data for being tempered with by the users.
When I try to run my macro, I get an error message stating:
Runtime '1004'
You can not use this command on a protected sheet
And the debug is pointing to this part of my code
View 14 Replies
View Related
Dec 11, 2006
When I protect my sheet and have the option to allow the users to autofilter the sheet, how come it doesn't work? I want to allow people to autofilter the data in the worksheet but not modify the contents of the cell.
View 9 Replies
View Related
Jan 26, 2009
I have a dropbox located on a sheet which other information needs to remain protected.
How do we give access to users to the dropbox while the remainder of the sheet is protected?
View 9 Replies
View Related
Nov 10, 2009
I have a question relating to the use of autofilter in a protected sheet.
My code is working fine in setting the autofilter and locking down the sheet but a user then loses the ability to use the (Data - Filter - Show All) menu button.
Is there a way to have the worksheet protected, allow the use of the auto filters, and allow the use of the show all button?
Code below incase it is of relevence ...
View 9 Replies
View Related
Jul 31, 2008
I am looking for VBA code that will unprotect the Workbook, prompt the user for the number of rows to be added, find the last row in the Worksheet, insert the requested number and reprotect the Worksheet. I would like the location where the rows are inserted to NOT be dependent on the "active" cell.
View 6 Replies
View Related
Sep 15, 2014
I have a protected sheet to avoid delete of functions. In a specific area, however, i have merged cells of five columns in rows. Because in these lines i have write some text and overcomes the rows, after, what i do is: i unmerge the rows and choose 3 rows from 5 columns together and merge. Thus, the text is in one framework. In fact, every time, i want to merge different regions, but always i want to merged any areas who have marked with the mouse. Then, i delete the text and i need to redo the context of three lines, three separate lines. I hope you understand what i need.MergeAndUnMerge.xlsm
View 1 Replies
View Related
Jul 30, 2008
I want to allow user copy(Ctrl + C) and paste(Ctrl + V) a row. because some columns are locked and the sheet is protected. so, when user doing so, a warning dialog is show and can't do the paste.
so, I want to make it available in code. what I want to do is add some codes in this function:
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Application.CutCopyMode = True Then 'there are someing in clipboard
Sheet1.Unprotect 'unprotect sheet, so can paste
End If
and in Worksheet_Change function, I protect the sheet again.
But I find that when I do Sheet1.Unprotect , the clipboard is empty! I just want to allow user can copy and paste a row, the locked cell's value can be ignored.
View 9 Replies
View Related
May 24, 2014
We are needing to do a two tier sort in a protected spreadsheet. Is this possible?
The two columns that need to be sorted have protected cells between them.
If there a way to ad a button that will automatically do this sort for the user... as in can I add a button some how in one of the empty cells that will do it?
Here is the sheet. [URL] ..........
Looks like I need to sort column A thru Z, except W.
View 1 Replies
View Related
Dec 11, 2013
I am working on an excel table in my worksheet contains formulas and locked cells. lets say table range is from column "a" to "f" and there is formula on cell in columns "c" and "f". I just locked cells in column "c" and "f" to prevent people changing the formula accidentally. but when the sheet is protected i am not able to insert or delete rows as the rows has locked cells in columns "c" and "f".
I tried the below macro to unlock the sheet, insert row and lock the sheet again:
[Code] .....
So by running the macro it asks the password and do the job but the issue is it needs password and i do not want people to know my password. I don't want them able to unlock the workbook and make any undesired changes. I want them to be allowed insert or delete rows and input data in unlocked cell. I want the sheet to be locked all the time and only when people want to insert or delete a row it be unlocked and be locked again after inserting or deleting whit no need to insert password in this case only.
View 1 Replies
View Related
Dec 30, 2013
I have a sheet protected and filters enabled. I use this code to enable sort and filters:
[Code] ........
Nevetherless, when I try to sort, I receive this message in excel: "The cell or chart you re trying to change is on a protected sheet.
To make changes, click Unprotect Sheet in the Review tab (you might need a password)."
View 5 Replies
View Related
Feb 3, 2014
I am using Outlining on a sheet called "Today".The sheet is manually protected but now the outlining does not work as it says sheet protected.Is there a code i can use so that i can still have the Outlining working in a protected sheet.
View 5 Replies
View Related
Apr 23, 2009
I would like to be able to add data to a protected sheet, only from a form without unprotecting the sheet first. Below is the code.
View 5 Replies
View Related
Jul 9, 2009
I have a protected sheet. Under normal circumstances, once the sheet is protected, the facility to choose the font goes away. You can allow it by putting a check against 'Format Cells' in the protection dialogue. But then, the user can format all aspects of the cell.
What if I want the user to be able to format only the font (type and size) and nothing else in the cell or in a range of cells. Is there a procedure or VBA for that?
View 2 Replies
View Related
Mar 22, 2012
One of our password-protected shared workbooks is acting oddly, but only for one user. The protection is supposed to allow users to expand and collapse grouped columns using the "+" and "-" symbols on the sheet, and for most users it is; but one user is getting an error message that she can't perform that operation on a protected sheet. I've had her close and reopen the file and we have confirmed that she has the same version of Excel as the users who aren't having the issue (Excel 2007). This is a shared file on a server, not a local copy on her computer.
View 2 Replies
View Related
Oct 31, 2012
I'm using a sheet which provides a visual reminder to user via Conditional Formatting of which fields they need to complete, but there are cells outside of the 'User Input' range which i'd like to protect.
Any way by which I can still allow the Conditional Formatting to run, but protect the locked cells outisde of the input area.
View 2 Replies
View Related
Feb 15, 2013
I would like to copy a worksheet that is password protected. When I copy the whole sheet it says, cannot change part of a merged cell and nothing is copied.
Is there a way to override password protection without knowing the password?
View 2 Replies
View Related