I have a sheet protected and filters enabled. I use this code to enable sort and filters:
[Code] ........
Nevetherless, when I try to sort, I receive this message in excel: "The cell or chart you re trying to change is on a protected sheet.
To make changes, click Unprotect Sheet in the Review tab (you might need a password)."
i am uable to use autolfilter when protecting sheet via vbacode even though i have checked the autofilter box to be able to use it whilst protected, why does it work when i manually do protection but does not work via vba?
View 9 Replies View RelatedI need to make a excel costing model to calculate various products prices. I am using Excel 2010.
I have many products and do not need all of them displaying at the same time, therefor I inserted a Checkbox (ActiveX Control) that hides my columns that I do not need. I did that by inserting the following and it works fine :
[Code].....
The problem is I now need to lock certain cells so that they can remain fixed and the recipe cannot change.
Once locked my checkbox no longer works and I get the following error :
"Run-time error '1004': Unable to set hidden property of the range class"...
What settings should I use in order to allow a user to sort data in a table when some of the cells are locked?
When I protected the sheet I ticked the option to allow user to sort data but it doesn't work...
When I either manually check the box for allowing sorting and autofiltering, or I do it through vba with:
Code:
With Sheets("Inventory")
.Protect Password:="###", AllowSorting:=True, AllowFiltering:=True, AllowUserInterface:=True
.EnableAutoFilter = True
End With
I still am unable to use the icons. The icons are clickable to filter or sort, but every time they say that the cells I am selecting are protected. I want them to be protected from editing the data, but want to allow them to be sorted or filtered.
If I protect a sheet but tick the boxes to allow sorting and autofilter I still get an erro when I try to use the sort buttons on the autofilter.
It allows me to use the filters but as soon as I sort I get told to unprotect the cells im trying to sort.
Is there a way around this where I can keep formulas from being touched but allow sorting of data through autofilter?
I have a problem with a spreadsheet I am working on, and I'm not sure if its something I've done, or whether its corrupted.
Basically, Column A is Hidden and not Locked in the protection tab of formatting. The other columns are Locked and not Hidden.
I used to be able to use the arrow keys to scroll through Column A, but this now doesn't seem to work. I can select the cells within column A with the mouse and I can scroll with the mouse and the scroll bars, but I can't move between the cells with the arrow keys, enter button or tab button.
Does anyone know what might be causing this, or is the workbook corrupt?
I have a column with a value resulting from a fairly complex formula:
I will not include the formula, but basically what it does is a number of calculations including subtracting dates, that is
TODAY'S DATE - A GIVEN DATE (provided in a different cell)
That means that, either manually or automatically, those values are constantly recalculating (with every second that goes by, that value changes).
And the number of values/cells to update is not few: about 1100.
Here's the problem.
When I press SORT, Excel seems to be absolutely incapable of sorting that list correctly. The values are completely and randomly out of order.
I wonder if it could be due to the fact that given that those values would be constantly changing, there would be a conflict with the commands
sort
update
I am having trouble getting this list of data sorted the way that I would like.
Here is the data:
I am putting together multiple worksheets with dumped data that should sort themselves by the press of a button. Each entry has a 'code' and a value and they are sorted by the 'code'.
At the moment i have the first worksheet sorting correctly and i am trying to program the second worksheet to sort data into the existing worksheets if they exist or create a new worksheet if the data doesn't have it's own worksheet.
Here is the code i am working with.
Is it possible to keep the sort icon available on a worksheet which is protected? I have issued a spreadsheet to colleagues which contains formulas so I have protected it, but I have now been informed that they need to be able to sort the data according to a ref number.
I thought of using code (which I'm not very good at) and used some from another excel document, but couldn't get it to work...the code was ....
I'm not fond with macros, but this is what i need help with.
I need two macros one to sort ascending (Ctrl+A), and one to sort descending (Ctrl+D).
This is what the macro to do. Unprotect, sort selected column, protect.
Is there any way to allow autofiltering and sorting even with locked cells within the range to be sorted? I've conditionally locked some cells based on user input, and at the end of my vb code I have allowsorting and allowfiltering. But I want to sort cells that are locked even after that. Does anyone know if that's even possible with VB?
View 4 Replies View RelatedI have a column containing 365 entries, one for each day of the year. This I intend to send out to Army bands, to have them fill in their forecast of engagements. I do not want them to be able to amend the original diary, but to scroll to the bottom of the list, add a new entry with the applicable date and then be able to 'sort' back to chronological order. This would then allow a separate entry for every engagement to allow me to interrogate the spreadsheet. As I have protected the sheet, the 'sort' facility does not function even though when protecting I ticked the box to allow users to 'sort'.
View 2 Replies View RelatedIs there a way I can sort multiple hidden protected worksheets with a password “Protect”
I have 12 worksheets “Jan”, “Feb”. Etc
“The Range on each worksheet is the same ("A11:CR200") ....
I need to protect my worksheet and only allow users to edit certain ranges. I am allowing the use of autofilter which I can select when I apply protection. However, I am now aware I cannot sort protected cells..which is essential. I basically need to be able to sort a column titled 'surname'. The worksheet is a record of pupils attainment in my class.
Now, I have a macro which seems to do the job: ....
I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
For the following code:
Code:
Sub ShowAdmin()
Sheets("Admin").Visible = True
End Sub
I'm getting the following error message:
Run-time error '1004' Unable to set the Visible property of the Worksheet class
I have spent ages creating a work diary and have protected the sheets using VBA however on finishing the sheet one important thing that needs to happen is the ability to copy and paste information from the boxes to another worksheet. i.e MONDAY - SUNDAY
View 1 Replies View RelatedDoes anyone know if there is a way to unprotect a sheet. The person who created this spreadsheet no longer works for our company and although we can see the spreadsheet, the formulas are hidden so we can't figure out where the data is being pulled in from. Any ideas?
View 9 Replies View RelatedIt was suggested that cells formatted as lists will now allow new rows or columns. I don't think this is case but not sure how to tell? Other suggestions were merged cells or cells protected. Not sure if any of these are the case either.
View 5 Replies View Relatedis there a code to still allow me to move between sheet tabs by using [alt] pg up or [alt] pg dn on a protected sheet?
What code would I use to test if the sheet is protected or not? In other words:
If Activesheet.Protection = True Then
MsgBox "You have no authority!!!"
Else
' Some code here
End If
I have a workbook whose worksheets use protection (don't want my calculations stomped on).
When the Protection is on, the search function does not work. You call it up, write what you are looking for, it accepts it, and then when you tell it to search it ignores you.
When you turn the protection off, the search function works just fine.
HOWEVER....Other workbooks I have with protection on its sheets do not share this problem, just this one workbook. And the problem is on all sheets in this workbook. The problem is not on any of the sheets in the other workbooks. I can't see anything different between them, but then I may not know what to look at.
I wanted to know:
Q1. How can we insert new rows in a protected sheet?
For example: In the attached sample protected excel sheet "insert rows.xlsx" , if for Employee ID and Name fields, the user has more no. of records than provided, how can he insert new rows considering the fact that Company ID and Name field are locked.
Or any way to address this issue via some other method like adding a scrollbar,etc.
I've locked certain columns on my worksheet so that users cannot overtype target dates etc. I've password protected the worksheet.
The password protection means that for some reason the users can't use the autofilters that are on the header row.
Can someone help me solve this problem; I still need the locked cells and password protection on the sheet but the success of the sheet depends on users being able to filter for specific rows using the autofilter....
I have protected several sheets in my workbook to protect the forumlas and data for being tempered with by the users.
When I try to run my macro, I get an error message stating:
Runtime '1004'
You can not use this command on a protected sheet
And the debug is pointing to this part of my code
When I protect my sheet and have the option to allow the users to autofilter the sheet, how come it doesn't work? I want to allow people to autofilter the data in the worksheet but not modify the contents of the cell.
View 9 Replies View RelatedI have a dropbox located on a sheet which other information needs to remain protected.
How do we give access to users to the dropbox while the remainder of the sheet is protected?
I have a question relating to the use of autofilter in a protected sheet.
My code is working fine in setting the autofilter and locking down the sheet but a user then loses the ability to use the (Data - Filter - Show All) menu button.
Is there a way to have the worksheet protected, allow the use of the auto filters, and allow the use of the show all button?
Code below incase it is of relevence ...