Run Macro In Another Workbook

Sep 18, 2007

My problem is I have many workbooks with the same command button name in each and i would like to loop through the workbooks and have the code click the command button, wait for the code to finish, and then save that workbook and go onto the next.

looping through the documents is easy but I'm not sure how to "click" the command button in the other workbook.

View 9 Replies


ADVERTISEMENT

Modify Existing Macro To Copy To Different Workbook Instead Of Open Workbook?

Dec 7, 2012

Here's my macro:

Code:
Sub CopyRow()'
'Copies row to new sheet, highlights it, marks column 'A' as copied.
'
Dim cCell As Range
Set cCell = Selection.Cells(1, 1)
Selection.Copy
Sheets("Sheet2").Select
Rows("2:2").Select

[Code] .....

Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.

View 2 Replies View Related

Macro To Transfer All Data From One Workbook To Specific Sheet In Another Workbook

Feb 23, 2014

I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.

View 8 Replies View Related

Close And Reopen Workbook From Macro Stored Inside Workbook

Mar 30, 2007

I have a Macro that is stored in a specific workbook,"Projection Modeler.xls" the last line performed in this macro is the close workbooks without saving chages(this needs to be done due to the way this macro was written, and it would take too long to rewrite). If I would then like to reopen this workbook, and then rerun this macro, can I do this from inside the current macro (in a new sub routine, for instance), or do I have to write a macro outside of the workbook and then open the workbook and call the routine?

View 4 Replies View Related

Macro To Copy Only Formats And Values From One Workbook Into New Workbook

Mar 5, 2014

I have a workbook that has a lot of formulas in it that reference material stored on my local computer.

I need a macro that will copy all 42 tabs in to a new workbook book without all formulas, but saving all the formats have made. This would save me from every other day coping and pasting manually each of the pages.

View 2 Replies View Related

Adjust Copy Macro From Another Workbook To Print Name Of Workbook As Well?

Feb 11, 2014

I have this nice macro that copies data from another workbook. I want to make it to also add the filename of the workbook (for example data.xlsx) it copies the data from, in a cell on the actual workbook (for example on sheet "Combined", Cell A10). What should I add to my macro?

View 3 Replies View Related

Copy Data From One Workbook To Updated Workbook Using Macro

May 1, 2012

I am creating a spreadsheet to provide to a group of about 40 people. The spreadsheet allows each member to track the referrals they receive and give. I need to plan on creating updates for the spreadsheet and want to make it so they can easily transfer their data to the most current version in the future. Here is a breakdown of the workbook:

Worksheets:
Members
Lists
Referrals Given
Referrals Received
Totals
Formulas

I need to copy the data that they have input from the following worksheets:
Referrals Given
Referrals Received

Here is a breakdown of the "Referrals Received" worksheet:
A1:V4 - Data that will not change and includes many named cells
A5:Nxxx - Dynamic Named Range where they input their data
O5:Vxxx - Contains formulas

I need to be able to copy
A5:Vxxxxx
from the old workbook to the new

Some side items to note:
There is VBA in the worksheet of
Private Sub Worksheet_Change(ByVal Target As Range)
and included in the code is an Unprotect & Protect code to always keep the sheet protected

I figure whatever works for this sheet will work for all the sheets.

View 1 Replies View Related

Macro To Save As Workbook 2 From Data In A Cell From Workbook 1

Sep 28, 2012

I have two workbooks open. I need to "Save As" and close workbook 2 with a file name from a cell in Workbook 1. The macro is running from workbook 1.

I'm guessing a change in the last line. I don't know what Dim means either.

Dim FName As String
Dim FPath As String

FPath = "G:"
FName = Sheets("sheet 1").Range("A1").Text
ThisWorkbook.SaveAs Filename:=FPath & "" & FName

View 1 Replies View Related

Run Macro In Open Workbook When Workbook Becomes Activated Or Deactivated?

Apr 8, 2013

Is there a way to run a macro in an open workbook when the workbook becomes activated or deactivated? So if I have workbook A open with a macro in it and workbook B open as well, can I have the macro run on workbook A when that becomes the workbook I see on my screen?

View 2 Replies View Related

Copy Macros From Personal Macro Workbook To New Workbook?

Mar 28, 2014

I need to copy several macros from the Personal Macro workbook to a new workbook that I need to take to another computer. I need to be able to run the macros on that computer. I can only record macros and make minor changes in the VB editor. I do not know VB code.

View 5 Replies View Related

Macro To Create New Workbook And Sheets Inside Each Workbook

Mar 31, 2009

I have a spreadsheet which has all the names of trips from a warehouse, the day that they operate (1,2,3 etc) and the job line allocated to each trip. It looks something like that:

A B C
DAYTRIPCUST

I would like to create a macro that will be creating 7 new workbooks and then in those workbooks as many sheets as the trips. In these sheets, the customers should be displayed.

How do I write it? I could not find how to have a "dynamic choice" in the macro. I.e. not to have the criteria as "1", "trips1" but to choose from the range of inputs that are available.

View 9 Replies View Related

Macro Is Closing Wrong Workbook Before Going To The Next Workbook

Aug 12, 2009

I run most of my macros out of a file called "Personal.XLS" and I have this bit of code at the end of this particular macro which is closing personal.xls instead of the active file it is working on. It is set up on a loop and it should go to the next file in the directory but since it closes the file I run the macro from, the macro stops immediately. It appears that it believes "ThisWorkbook.Close" is referring to the file from which the macro is initiated.

View 2 Replies View Related

Save Workbook As Macro Enabled Workbook By VBA

Jan 23, 2012

the following scenario.

I am using the following code to save a workbook as a macro enable workbook on the selected path as today's date. But it is being saved as a macro free workbook.

Below is the code in module:

Sub save_file()
Dim tDate As String
Dim FileSaveName As String
Dim fPath As String
tDate = VBA.Format(DateSerial(Year(Date), Month(Date), Day(Date)), "dd-mm-yyyy")
'FileSaveName = Application.GetSaveAsFilename(InitialFileName:=tDate, filefilter:="Excel Files(*.xlsm),*.xlsm", Title:="Please save the file")

[Code]...

View 4 Replies View Related

Call Macro When Clicking In Specific Cell From Personal Macro Workbook

Aug 13, 2014

This is the code I use to call a macro when the macro Im calling is in the same workbook.

[Code].....

However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.

I also tried this code.

[Code] .....

View 2 Replies View Related

Macro Disable/enable Still Appears After Macro Deleted From Workbook

Oct 3, 2006

I have a question concerning Macros and the Disable/Enable prompt. My boss has a spreadsheet which has been used for years and he recently wanted to and did remove the macros from the spreadsheet (they were no longer necessary), but the disable/enable prompt still appears when the spreadsheet is opened. I replicated this in a test spreadsheet with a simple insert line macro and received the same results. Is there a way to remove the macros and the disable/enable prompt once they are removed? I know about setting the security to low to not see the prompt, but I would think that once the macros are deleted, the prompt should not appear any more.

View 2 Replies View Related

Macro To Save Workbook By Referencing Cell In Another Workbook For File Name And File Path

Mar 21, 2013

I have got a master workbook and I have written macro to copy and paste data on another workbook. write a macro to save the new workbook to a file path with a file name where both file name and path are stored in master workbook sheet...

View 5 Replies View Related

Restrict Macro Keyboard Shortcuts To The Workbook Containing The Macro

Sep 30, 2006

I've created Keyboard Shortcuts to run Macros in "Workbook A". Problem is, if I have "Workbook B" open in the same Excel instance/process as "Workbook A" the Keyboard Shortcuts will run the Macros in "Workbook A".

Is there a way to restrict the Keyboard Shortcuts to only run the Macro if Workbook A is active?

Or is there a way to code the Macro to run its procedures only if Workbook A is active?

View 3 Replies View Related

Open File Macro: Same Directory As Macro Workbook

Nov 17, 2006

I created folder on my desktop to hold various documents. I have master excel document which contains forms and command buttons that open documents from same folder. Is there a way to change code instead of having full file path to specify current directory. I'm worried that if I move this folder to another location then my open file button will not work since location is changed.

Also when I open with command button word document, I have a button on word document to close. I can close document but word application is still active. Can I close word application with the document at the sam time. This is the code I'm using: "ActiveWindow.Close"

View 3 Replies View Related

Cannot Edit A Macro In A Hidden Workbook. Unhide The Workbook Using The Unhide Command?

Apr 23, 2009

using Excel 2007/Vista

when I go a new edit a macro, I get the message

"Cannot edit a macro in a hidden workbook. Unhide the workbook using the unhide command"

Where do I find the relevant "unhide command"?

View 9 Replies View Related

Run Macro In All Excel Macro Enable Workbook

Jan 27, 2014

I want to run a welcome macro in all excel workbooks. Whenever I open any macro enable workbook the welcome macro should run.

View 9 Replies View Related

Create Macro That Won't Allow Movement With Workbook Until Macro Run

Jan 28, 2014

Writing a Marco. I would like to place a macro on the opening page of a workbook and like to a button that executes three functions.

1) I need to hide selected tabs in a workbook
2) I need to copy paste values of a couple select cells in a workbook
3) Lastly, I would like to set up the workbook so that the use can not move beyond the opening tab with out clicking the macro to preform the steps above.

Is this possible? I know 1 and 2 are for sure, what about 3?

View 1 Replies View Related

Macro To Open And Execute A Macro From Workbook

Jul 20, 2003

Is it possible to use a macro to:

1. Open Excel from the Desktop

2. Open a workbook

3. Execute a macro from this workbook

If so, how can it be done, specially point 1?

View 9 Replies View Related

Macro To Log Changes On One Workbook Onto Another?

Jan 28, 2014

I'm looking to use a macro that says that every time a change is made on column H in one sheet (Test Book1), that change is recorded (Record Name, Revision Date and Revision #) on another (Log Book1).

I realize I would begin with a worksheet change operator, but past that I'm stumped. I would then need to reference column C and H onto the Log Book1 worksheet.

View 4 Replies View Related

Use A Macro In ANY Workbook?

Feb 11, 2009

Is there somewhere/someway of storing a macro so that I can use it when I open any workbook.

I have to export a new report to Excel each week and would like to run the macro on this exported report.

I have the macro (found on this site), can this be (easily) done?

View 2 Replies View Related

Run Macro In One Workbook From Another

Jun 30, 2009

I have a vba Project that asks the user if he/she wants to add an option. If he or she choses "no", the the sub exits. If they choose "yes" then the code opens a workbook template, saves it with a specific name, and takes the user there.

What I need is for a specific macro to be run, (exists in the template book) only when opening the workbook through this method.

View 3 Replies View Related

Run Macro From Different Workbook?

Nov 5, 2012

I have a function that opens another workbook, (I have to open the Workbook for many reasons) then run a Subroutine within the workbook, extract some data and close the workbook. Simple but I get an error that the workbook could not be found when I run the command:

Application.Run "Server machine status.xlsm'!MatchGroupsAndPolicies"

ERROR
Run-time error '1004':
'Server machine status.xlsm" could not be found. Check the spelling of the file name, and verify that the file location is correct.

The file is open and selected!

View 2 Replies View Related

Run Macro Or Sub In A Different Workbook

Sep 28, 2006

How do I run a macro or sub in a different workbook? I am getting an error with the following syntax, though the file is open:

Run "Model Template with Sensis.xls!ELcalculation.xlm!ELcalculation"

where ELcalculation are names of the module and the macro also, if I were to copy and paste from one workbook to another, could the syntax be

Workbook(something).Worksheets(something).Range(something)value = Workbook(something).Worksheets(something).Range(something)value

View 3 Replies View Related

VB Run Macro From Another Workbook

Jun 1, 2007

From a macro in one workbook I want to run a macro in another workbook.

I can't make this work as VB won't run the macro (CreateAndSaveAnalysis) in the second workbook....

View 9 Replies View Related

Run Macro Once Workbook Is Opened

Oct 2, 2012

I want my macro on the IR Tracker sheet to run once workbook is opened. Is this possible?

I have attached the workbook for better understanding.

View 9 Replies View Related

Macro For Row Copying From One Workbook To Another?

Mar 29, 2013

#in order of priority

#1 So what I want to do is copy multiple rows from a table into another table, but only info from column a,b and c of that row into the other workbook's table. So I need to search for the number that is in E1 of workbook#1 and pull the rows that have that number from anywhere down column E of workbook#2. But I only want the info from cells a,b and c of the rows to transfer over.

#2 Also how to pull that off on all the sheets 1,2,3,4,5,6,7,8,9,10,11 and twelve of workbook#2's column E's into one list in workbook#1.

#3 How to put a button for the macro so if I change the value in E1 I can just hit it to repopulate the workbook#1 with a new list.

#4 How to pull from page 1-12 of workbook#2 but also a workbook#3 as well.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved