I use Excel XP 2002. I now can't copy /paste by using the right mouse button. It works perfectly in other MS products, on the net and on the desktop. l have checked my Tools/Options with other users, I have uninstalled, rebooted and reinstalled the complete Excel package but the problem persists, even from start with a blank worksheet. I have also checked and there are no add-on ticked.
I'm trying to design a form, for various staff members to populate. I would like to ease their usage by putting a check mark in which ever cell they left click, also if they click a second time in the same cell it will undo the action.
I have not decided yet which which cells I am using, but is their some simple routine that could be used over & over again and all I would need to do would (hopefully) simply be to change the cell numbers in the routine to apply to that cell or range of cells.
I have a log that stores a list of different files in the first column. All of these files are worksheet hyperlinks (ie: =HYPERLINK("\USSS000010_PUBLIC5_COMMON15_PPA20066-032G6-032G.xls","06-032G")). If I click on any of these cells the file will open.
I am trying to open certain files from the list using VBA.
My question is Is there any way to simulate a mouse click, on the cell containing the hyperlink, using VBA?
In excel when you have filters on for all columns there is a little bitty square box with a little down arrow (like an upside down triangle) in the lower right corner of every cell in the top row (the header row) and I can't find a way to select one of those little itty bitty down arrows without using a mouse - -
Is there any way to select one of those little down arrows in the little filter box icon thingy with the keyboard?? I can't figure it out.
I just want to select the little arrow so that the filter dialog box opens - I am trying to create a keyboard macro that will use the 'BEGINS WITH' macro but when i record the macro it uses the same word for the "BEGINS WITH" parameter every time and I want it to use the word in the current clipboard - can't seem to write that.
way, using VBA code, to disable/enable individual shortcut menu items that are are made available with a right mouse button click. The following code disables the right mouse button completely but I would like to disable only a couple of options like the ' Cut' option.
The code to disable is below and to re-enable I just change False to True.
Dim cb As CommandBar i = 0 For Each cb In CommandBars If cb.Type = msoBarTypePopup Then cb.Enabled = False Next cb
I have a worksheet that I use to monitor the progress of student interns. They are assigned 20 different tasks and recieve 5 points for each task they complete, for a possible total of 100. In my worksheet, I record their progress and maintain a running total. I do this by simply inserting the number "5" by each cell containing each task. Instead of inserting the value, what I'd prefer to do is simply place my cursor, click the mouse button, and have a formattable check mark appear with a hidden value of "5". I'm simply trying to create a snazzy interface. Do I want too much? Or is it actually possible to do this?
I have an excel file with a column (I) which lists the total number of businesses in a different tab (DATA) that meet certain restrictions (these restrictions being listed in the same row in different cells). When the cell under coluimn "I" is double-clicked, it pulls the businesses from tab DATA that meet the restrictions for that row and shows them all in another tab.
I don't know the person that created this and was wondering if there is a way to figure out what is being done to make this happen? I looked in macros, but didn't see anything relating to this. Anyone know how this is done?
So you know, I have tried double-clicking other cells, but nothing happens - not even editing into the cell (altho this can be done from the toolbar up top).
I have a menu structure in place so when a user clicks a button, it opens a Userform as a menu. The only problem i have is that if the user doesnt want to use that menu, and clicks on the spreadsheet, it doesnt dissapear.
Is there any VBA code that anyone knows that when a user clicks on the spreadsheet, or even just clicks their mouse anywhere (ie other menus at the top, spreadsheet, desktop) like a mouseout code on HTML so the menu will dissapear?
A list box selection works fine on my computer but on a friends Windows Vista PC the following happens:
Selecting items near the top of the list works fine. 1/4 of way down a mouse click on an item selects the Next item. 1/2 of the way down in the list, the mouse click on an item selects the one 2 or 3 further down, etc., etc.
it would be possible to have text disappear after being displayed in Excel for a while.
My son and I played around with games (helping create a photographic memory, I told the youngster!) on the thing and until yesterday neither of us noticed that clicking the mouse anywhere (actually just clicking it) causes the screen to "freeze" while the code still happily erases the text in the background.
Hitting ESC allows the screen to cath up to the actual code EVEN THOUGH the ESC key is actually disabled from breaking the code.
I'm using code based on the following post: Add Borders To Cells Of Spreadsheet From Access. That code was developed for a relatively small recordest. I am using the same coding style to transfer a recordset that has roughly 2000 records in it. Since this is all taking place over a network there is a period of time (about 15-20 seconds) where Excel is open and the user is watching the cells get populated from Access. If, during that period of time when Excel is open, the user clicks in a cell during the population of data, it stops the process and causes an error on the Access end (Error 50290: Application-defined or object-defined error). Is there a way I can prevent user input (perhaps prevent signals from the keyboard and mouse) until after the data has been transferred? I know this is a long way to do a TransferSpreadsheet command but I like the way the column headers get formatted as well as the column sizes. I also think it's pretty cool to watch the data populate as it goes.
I've just inherited a load of Excel files I need to continue using, but my predecessor has done something that disables the middle-click scroll ability.
I can still scroll up and down by turning the wheel, but I want to be able to click it and scroll in all directions at speed - I didn't realise how much I used this until I couldn't. Can't see anything in the VBA sheet properties, and they are all .xlsx files. Nothing leaps out of the settings either. If I create a new file or a file of mine within the same session, they work fine.
I am trying to take two random Mouse click selections and swap a set of ranges associated with the cells that are selected. For example if the user clicks on A1 it will resize(3,22) and store the selection as a variable to be swapped with another selection. Here is what I have so far but I keep getting a object required error on rngEmp1.
VB: Sub SwapGroup() If Selection.Cells.Count < 8 Then MsgBox "Please Select two Groups to swap. Press and hold 'Ctrl' in between your selections", , "Swap Groups"
is there a way to launch a macro when your mouse is over a specific cell or a specific range of cells ? The idea behind is to update a chart based on the cell value, in case a name, with its associated values
Is it possible to display a name on a chart that is not the X or Y value?
I've been sent this macro which displays the school name on a chart when the mouse is on the data point - its all well and good but on the graph I am working on, the X and Y value are both values and I want the school name to come up as well.
Private Sub Chart_MouseMove(ByVal Button As Long, ByVal Shift As Long, ByVal x As Long, ByVal y As Long) 'macro that gets chart to show user details of a point on the chart when the mouse is moved over it Dim ElementID As Long, Arg1 As Long, Arg2 As Long Dim myX, myY As Variant
With ActiveChart .GetChartElement x, y, ElementID, Arg1, Arg2
If ElementID = xlSeries Then 'checks to see which part of the chart the mouse is over
I'm trying to do a few things actually. I am somewhat a newb at programming, although I do understand how C++ and the coding works within Excel. To me, it's like the English language...knowing all of the vocabulary and formatting it right is important. If I don't know the vocabulary, I don't know what options I have.
This tool is being used in the call center I work in. It is to help eliminate repititious information used to notate accounts. I have attached a picture of what the tool looks like so you can have a better idea of what I'm working with. Here are a list of things I'm trying to do which I have searched and not found answers to:
1. I am trying to use a middle mouse scroll to scroll through validation list. This list information is located on a different locked tab. Basically, I have a few rows where a drop down selection can be made and it would be easier to scroll rather than manually moving the slider within the validation list.
2. As you can see, this "tool" an employee and I have created has many buttons. What I would like to do is to be able to click a button on the right and have it "stack" text within a single cell. In other words, if I click the button once, the text may be entered into the "actions taken" cell. If I click another button, I can have the option (or maybe a little "+" next to the button) to add this button's information to the end of the information already entered within the "actions taken" box. I've tried recording and using the keyboard and selecting "end" and then having the text added, but it didn't work. I've seen "loop" VBA code, but I don't want something to repeat, I want it to stack in the cell when clicked manually.
I'm sure there is a way to make the tool much better using VBA code and not use Excel, but I don't have an extensive knowledge of Excel to do something like that. I'm a very fast learner and understand how the coding works, so if you have an idea which may help, and you understand what I'm trying to do here, please provide your .02.
Basically, it's used so the Customer's name and phone number are entered manually, and then just about everything else is automated by the use of the buttons on the right. If I could get the 2 above options to work, it'd be perfect. I just figured out I could eliminate screen flicker and hide the macros working by using:
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.