I have 3 different sheets with a private sub on each all labelled
Private Sub CommandButton1_Click()
The macro's runs fine on each page.
I want to put a macro on a separate sheet that i can run each of those macro's
I did initially copy the original private macro and change the
Private Sub CommandButton1_Click()
to
sub report()
But I couldn't do all 3 in the same manner. i did change each name to something different... the other 2 subs did run, but they didn't do anything except put the massage box on the end saying that "the macro has finished".
I need a line of code so that when I hit commandbutton2, the Private Sub Worksheet_Change(ByVal Target As Range) event macro on the same page DOESN'T run. The button clears certain lines, and when it runs the change event it ends up in an error, and I don't need it to run when hitting the commandbutton.
I have a drop down box selecting from a list of dates (Oct-13 - Dec-14) that I need to display as "mmm-yy" to the end user so have written the following code to format when a date is selected:
Code: Private Sub SDatePicker_Change() SDatePicker.Value = Format(SDatePicker.Value, "mmm-yy") End Sub
For some reason the code seems to run through itself twice and I can't figure out why. The result of this is an incorrect date being displayed (strangely when I select 'Jan-14' for example, the result is 'Jan-13'.
Perhaps I should point out that the default formatting of the date values seems to be in number format e.g. 41976.
I have a private sub macro for Sheet1 as shown below
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address "$B$2$" Then Sheets("Start").Select Exit Sub End Sub
And I have another macro (call ADDNumLine) that add additional data to the Sheet1. How do I temporally disable the Private Sub above when executing Macro AddNumLine?
When in a ThisWorkbook macro, I want to call a sub/macro in a Module. Usually you can just do a CALL MACRO1, and it will find it. But my MACRO1 is Private as I don't the users to be able to do a Tools, Macro, Macros and see it. So I don't want to make it a Public macro. So how do I call the private sub/macro from within ThisWorkbook?
Can I proceed the sub/macro's name with the name of the module, kind of like CALL MODULE1.MACRO1? Or do I have to make it public?
I have a sheet that has a macro on it, I would like to run that macro programaticaly but Im not able to call it using Call mymacro type of code. The code that calls the macro resides in a module and the macro is in a sheet. Obviously they are not talking, is there a way to run it remotely without moving the macro into the module?
I would like to have something that will auto run the code in Module1 when the Excel File is opened, but I do not want to code tansfered into the file when it is saved in its location.
I don't mind if the code is tranfered to saved file if in fact I can make sure the code is not run when the new file is opened...
Everything is working as intended at the moment, but when openeing the saved file the entire macro tried to run again. This is what I do not want...
I have a spreadsheet with near 300 tabs, each with a picture in the tab. The main tab has a list of all other tabs, the goal is to allow the user to click on a cell next to an entry, and have Excel flash the referenced tab to allow the user to see what the entry is referencing. I have written a simple macro that activates a desired tab, unhides it, displays a message box to pause the macro, rehides the tab, then returns the user to the main tab.
Rather than creating a macro for all 300 tabs and creating buttons I would love to use the Private Sub Worksheet_SelectionChange(ByBal Target As Range) or some variation thereof, to make my life much easier. The name of the tab is in cell A2, so I would want to have the user click on cell A1, activate the macro, then take A1 to A2 with something like A1 = A(x+1)->A2, then display the tab listed in A2. So rather than have 300 macros with Sheets("XYZ").Visible = True, I would love it to read Sheets(contents of referenced cell).Visible = True. with the contents of referenced cell coming from some manipulation of the cell I clicked on...
I'm having trouble calling a defined range within a VLOOKUP function in VBA. If the named range is located on the same sheet within which you are running the macro, everything runs fine and all is well in the world.
However, after I relocated the range to a separate sheet (a 'SourceData' sheet to tidy up the user interface sheet), I was getting the following error message:
Method 'Range' of object '_Worksheet' failed
The name is correctly defined - Range("DaysInYear").Select still picks up the correct selection - it's just the VLOOKUP will no longer function correctly.
Here is part of the macro's For I = 1 To NumberOfDays Range("A1").Value = DateAdd("d", -(I - 1), EndDate) If Application.VLookup(Range("A1"), Range("DaysInYear"), 3, False) = 1 Then If Application.VLookup(Range("A1"), Range("DaysInYear"), 4, False) = 0 Then ActualNumber = ActualNumber + 1 End If End If Next I
Where can I obtain some working examples or explanations as to what, where, when, why, and how these Public and Private Sub are correctly implemented? I see these code used extensively but not sure why it's there yet. A macro which uses a Private Sub is in one of my workbooks. Due the "progress" of things from here I now need to move to the next curios level of understanding Macro and VB coding.
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
I'm trying to get a macro to run when the user presses the save button. I have the following code:
[Code] .......
This code is supposed to apply the TRIM function to every worksheet in the workbook when the user presses save, and the saves the results. I understand the Private Sub bit is the code to have the macro run during the save, but for some reason the macro itself isn't actually running. I'm not getting any error message, its just that the cells which should have the TRIM function applied to them aren't being corrected.
I have a macro that takes about a minute to run. I would like to add a progress bar to appear once the macro starts running. There are no loops in the macro. What are my options?
I have 7 different workbooks as part of my daily routine.
At present the first workbook is opened via the task scheduler, and the macro is run using the following code
[Code] .....
This then opens the next workbook and closes the current one. The next workbook then runs its macro again from a timed call
[Code] ...........
This repeats for 7 workbooks. The problem is, if a macro overruns - the whole schedule is out of sync when macro's are called depending on the time. What I would like to do, is link each macro by calling for the next one, and closing the current workbook. However, when i have tried to do this, the macro has always stopped when the workbook has been closed - the next macro doesn't run.
Below is the entire code that I am using. It is a simple routine which checks whether a part has started its release process or not, based upon dates. The code works and does what I want.
The problem that I have is that it is very slow, for example it takes 35 seconds to go through 530 lines items. In my (limeted) experiance, based on other VBA doodlings this slow.
I already have a macro made named (PowerPoint) that is saved to the wookbook. I am looking for a way to have this run every 20min. I have tried several differnt things and it did not work. Here is one I found online. I only need it to run when it is open and every 20mins. as long as I have it open.
How do I ask for a confirmation box before running a macro, but only one time. What I mean is some of the macros I use loop and it wouldn't be practical to click on "ok" for each time the macro ran.
So again I just need some code to tack on to the beginning of a couple of my macros that will ask me before they run but only once.
I have the following macro in a worksheet...and it is running very slow. There are other macros in the worksheet and they all run very well. Any ideas by looking at this code why it would be so slow in running?
I have a spreadsheet containing a macro to automatically sum values from week to week and display the max/min and average. This is almost fully working. The problem I have is the macro copies the sum formula down the page and doesn't stop at the last row. It always adds one or two extra rows. The formula should stop at row 77 however this does not happen and therefore the sum keeps going. Which in turn, distorts the max/min figures.
I am trying to utilise a vba script for DNS resolution which i got from Followup: DNS Lookup and Ping in Excel - CodeProject
I have a list of IP addresses that I want to use this on, however if I test this by using the test instructions, excel does nothing, its just text in a cell, so I would like to know how would this procedure get called from the spreadsheet?
Code:
GetHostname("4.2.2.1") in any Excel cell.
or
Use: GetIpAddress("www.google.com") in any Excel cell.
The good news is, the macro is indeed being called because the MsgBox is executing. It may even be able to read cells and send the data back to ruby or display it in a message box. The bad news is I can’t select a sheet or cell and actually write to it! When I call this macro from Excel it works as expected. How do I fool Excel (2007) into thinking it’s OK to allow these operations. There is no explicit message that says “Hey this is in read only mode” but I suspect that is what is going on.
I have a macro running with columns from A to H and ''infinite'' rows +conditionnal formating and one formula for the value in column D I'd like to add one more condition, but I can't figure how...
*I'd like to add a step to the macro on sheet1 to automatically move a whole row (a to h) to sheet2 as soon as my equation in column D find a value = 0
after each row is transfered, i'd like to sort it in a descending order on sheet2 based on the number value in column A
what to add to get this to work
Private Sub WorkSheet_Change(ByVal Target As Range) If Target.Count > 1 Then Exit Sub 'Only run if 1 cell is changed If Target.Column 8 Then Exit Sub 'Only run if change is in Column "F" If Target = Cells(Target.Row, "A") Then 'Check to see if entry matches column "A" Else: MsgBox "Invalid entry" Application.EnableEvents = False Application.Undo Application.EnableEvents = True End If Range(Cells(2, 1), Cells(Target.Row, 8)).Sort Key1:=Cells(2, 8), Order1:=xlDescending End Sub
