I have a spreadsheet containing a macro to automatically sum values from week to week and display the max/min and average. This is almost fully working. The problem I have is the macro copies the sum formula down the page and doesn't stop at the last row. It always adds one or two extra rows. The formula should stop at row 77 however this does not happen and therefore the sum keeps going. Which in turn, distorts the max/min figures.
View 2 Replies
I wanted to run a macro at 08:00 each day. I tested the macro would auto start and run, and set the test to start at 13:00.
In the Private module of the Workbook I put
Private Sub Workbook_Open()
Application .OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
and in a standard module
Sub TestTimeMacro()
Application.OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
Initially I had the TimeValue set as 13:00:00. The test worked OK so I changed the timevalue to 08:00:00.
The macro now runs at 08:00 and 13:00.
How do I stop the 13:00 event?
I currently have a userform that runs a bunch of code for me. There are a lot of listboxes on the userform that have rowsources of various dynamic named ranges. I'm running into a problem when I have the used click the "Remove Item" button from the userform. Normally it is supposed to go back to the sourcerow and remove all of the cells that contain values that are selected in the listbox.
The code for removing the cells works just fine, however when it deletes a cell, for some reason the code executes a private sub that is in a different sheet. I can't figure out why and it's messing up my macro.
Here's the
FROM USERFORM:
Private Sub cmdAIRemove_Click()
For i = 0 To lbAISummary.ListCount - 1
If lbAISummary.Selected(i) = True Then
For Each cItem In Worksheets("Lists").Range("YourAI")
If lbAISummary.List(i) = cItem.Value Then
cItem.Delete (xlUp) '<- right after this line it jumps to NWSMonth_Change
i = i - 1
End If
Next cItem
End If
Next i
End sub...
How to stop macro while running SendKeys statement. I am not able to stop the process while running SendKeys statement. this is my Sendkeys VBA
For Each cell In Selection
SendKeys cell.Text, True
Next cell
I've created a macro that runs for about 3 seconds. While the macro runs, the active worksheet display jumps around because of the various cell references being addressed in the macro.
Is there a way to stop the jumping around? How can a simple "Progress" screen be displayed while the macro is running?
I'm opening a workbook and then running the macro in the workbook. The problem is I would like to build a "timeout" feature if the macro is running too long (as some of the macro's this will run can take days to complete) but I don't know how to run the macro asynchronously. Also I need to know if i can get it to run asynchronous is there an event that will tell me when the process is finished. The calling application of the macro is written in VB6 and opening excel workbooks to run the macros out of. also the "timeout" feature must be done from the VB6 application it cannot be edited into the the workbooks containing the macro.
View 6 Replies View RelatedI've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
Hi, I am runnning this marquee label function in a userform (Dash). When I close the form, using 'unload frmDash' the function is still running in the background. Can someone give me a tip on how to end it at the same time as the form is closed?
View 14 Replies View RelatedI have a large macro called SplitData, which takes a load of data and splits it and reformats it each month.
I have 4 Activex Control combo boxes on one sheet that are linked to a range...this range changes each month, so I blank out the range and then repopulate.
My problem is that when I blank out the range, it triggers the Private Sub ComboBox1_Change() and throws some errors because there is no data to select.
So, I was wondering if there is something I can set in my SpltData macro that will not run the ComboBox1_Change sub while the SplitData macro is running?
I have a vba function linked to conditional formatting that i want to temporarily stop while a sub to insert a line is running as the sub stops when it hits the sheet where the vba function operates. When i disable the vba function (or remove the vba function) the sub works fine, if the vba function is not disabled the sub stops.
View 4 Replies View RelatedAttached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.
Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.
If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...
My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.
What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.
Test.xlsm
My users log on with unique PIN numbers for example 1234. I have a worksheet that has approximately 10 different VBA codes. What I would like is the ability at the start of the code to say if the current users pin is not in a hidden range then exit the code. If not run it. Is this possible?
View 7 Replies View RelatedI have the following code to add dash mark to TextBox1 value depending on some condtions (mentioned in the code), the code works perfectly, but when we use Backspace Key to clear some charactors it is conflicting with the code running when changing Textbox1 value.
View 11 Replies View RelatedI have a file that shows a rolling screen and updates information every 30 mins. I want to be able to stop the screensaver from activating while this file is open.
I have found this code on the forum that does this, how do I call this function from another module? ...
I have a couple of functions running in my workbook, and for no reason that I can see, when one of them runs during a simple macro I use to show/hide some columns, the worksheet vanishes. Is there a way to stop all functions running while I show/hide columns?
View 5 Replies View RelatedI am using a macro that automatically updates data obtained through a DDE link at 5 second intervals. My code is based off of the article "Automatically Run Macros at a Set Time or Date" found on the Ozgrid FAQs found here: http://www.ozgrid.com/Excel/run-macro-on-time.htm
However, I have this macro execute when I activate a Form Button, not when the workbook opens. So far, this macro works perfectly, and I have no problems. Although, I'd also like to include a Form button to STOP the macro from automatically running if the user chose to do so. How exactly would I go about making this STOP button?
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedHere in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
i need to make a button that Immidiately stops all macro's, Or (and This will maby be little more difficult) Stop all macros on a specific time inserted in 1 cell
the macro's that i want to stop running, are all single macro's which i activate with only 1 button i created.
i like something like this:
if "A1"(this is the cell where i have my updated clock) == A2 (the time i insert here stops the macro's at this time) do stop Macro's
If you run it now, ctrl t, it produces letters and changes alphabets as it hits a yellow box. If i change or add a yellow box, the letters change fine. The macro works perfectly, but instead of inputting the range or K3 to what ever, i would like to to run this macro and stop once it sees the row with the sort number of 4. ( this changes row postion depending on which sheet im working on, this is the problem).
View 4 Replies View RelatedI tried the belwo code to stop Macro if column "A" has the value "#NA" but i am getting error.
{if the Value "#NA" not in the column "A" then macro can continue to run}
[Code] ......
How to rectify the error.
I'm trying to create a macro to input information into a cell then repeat until the information stops.
So say I have 10 rows of information that fill up A1:D10. in E1:E10 I'd like a macro to insert some data into E1 then go to E2 and do the same until the end and then stop. So since A11:D11 would be blank the formula would just stop.
I actually work on 100's of cells a day and this is for a bigger project I'm trying to put together or I would just drag.
I need a code that will stop a Macro if any cell in column 3 equals #N/A All i have right now is:
If Selection.Columns(3).Columns = "#N/A*" Then
MsgBox "Incorrect Value"
Exit Sub
I have got he below code in "thisworkbook" it works fine but I have a problem with it if it has been closed before the time expires. If it is closed it tries to reopen it and then close it again. So for my users who have got their security set to prompts the file will be closed and a message box appears saying "enable or disable Macros". If it is already closed than i dont really want this to happen. My security is set to low but i still see it flash up and the bottom then dissappear again. How can i get the Macro to stop if it has already beed closed??
Private Sub Workbook_Open()
Sheets("database").Select
Range("au16").Select
Application.OnTime Now + TimeValue("00:15:00"), "TimeOut"
If ThisWorkbook.ReadOnly Then
MsgBox ("The file is currently being used by another user, please contact them to ensure they have not left the file open.")
ActiveWorkbook.Close SaveChanges:=False
End If
End Sub
Sub TimeOut()
ThisWorkbook.Close SaveChanges:=True
End Sub
I am running a macro that populates the same chart with variable data. I have approximately 40 sets of data and wish to pause or stop the macro to view one of the sets of data more closely. The pause option would be better but Stop option is acceptable
View 2 Replies View RelatedI am trying to use a macro to check if any cells in a range of cells are less than 0 before proceeding.
VB:
Sub Macro()
If Range("F2:F49") < 0 Then
MsgBox "Please verify column F."
Exit Sub
[Code] ....
I have macros that often pause for the user to take some action -- for instance, to confirm that the correct cells are selected, or to delete something. Usually I use the "Stop" command, which opens the VBA editor; when I finish doing the manual action, I just resume the macro.
When writing macros for actual users, I'd like to do the same thing without their having to deal with the VBA window. Is there a way to pause and resume action and remain in the Excel window?
I did not want to bother you again but I have a problem that I can not solve it because my knowledge in vba etc, are limited and could not become to find with Macro Recorder.Usually I solve the problems on my own by searching on Google and experimenting with ready Macros and Macro Recorder.
I have an excel file with a macro and I want before this macro launched, to run another macro that can check if the headers have the correct name and in its correct position. The headers is in first Row.
If are not in the correct position or if it doesn't exist or if not have the correct name, then the process of the next macro be stopped and of course be informed that there is a problem.But if Is everything okay, then proceed to the next macro and be informed that Is everything okay.
I have attached a Sample file with the headers i'm using.
Sample...xlsm
[Code].....
I have the following macro to recalculate the time every second on opening a spreadsheet
Sub Auto_Open()
Calculate
Application.OnTime Now + TimeValue("00:00:01"), "Auto_open"
End Sub
Looking for the code I need to add that will stop the macro when the file is closed.
