I am getting a runtime error 32809, Application-defined or Object-defined error when I try to open my workbook. I remember someone posting code to set the VBA References when the Workbook is opened and I think this is what I need, because the file will run on Excel 2000 and not on Excel 2003. I know the References are different, but I don't know how to change them.
View 9 RepliesI have a list of workbooks on a sheet that i am trying to open with vba one by one. If a workbook in my list does not exist or was deleted then excel displays a runtime error. Is there a way to bypass this error and have the code skip the non existant workbook and open the next one?
View 8 Replies View RelatedSuddenly when I open a ExcelWorkbook Microsoft Visual Basic shows a messagebox stating: "Runtime faillure 9 Subscript out of reach" only the closebtn is enabled. After closing the box the workbook opens normally.
View 2 Replies View RelatedThe following script runs fine the first time I click the command button on an Access form but after I close the Excel workbook and click the command button again to edit a new spreadsheet, I get the follow error message:
Run-time error '1004': Method "Columns' of object'_Global failed.
It fails here:
Code:
Columns("H:H").Select
The script is being run from Access 2007 and is opening a spreadsheet in Excel 2007 (but using xls extension)
Code:
Private Sub IdahotoExcel_Click()
Dim dlg As FileDialog
Dim idahofile As String
[Code].....
VBA code below. My aim is to be able to copy a range from one workbook to another and I get the Run Time Error 438 on the line colored red.
Can this code be corrected or is there an easier way to get this done?
[Code] .....
I'm trying to introduce some VBA code to an existing workbook that will automatically sort column A alphabetically on Sheet 2 (Summary) (excluding rows 1 & 2 as they contain headings) whenever the workbook is opened.
At the moment this code doesn't automatically run and when I run it manually I get a run-time error '91' the first time I try and when I run it for a second time (again manually) it works.
The code I've got at the moment is:
VB:
'The following code will run the sorting subroutine when the workbook is opened:
Private Sub Workbook_Open()
Call SortByWave
End Sub
'And this subroutine will enable the autofilter functionality, clear all existing filters and then filter the data on column A:
Sub SortByWave()
[Code] ......
i have this code for copying diffrent ranges of cells and saving it in different workbooks:
Sub NewCopy()
Dim strFileName As String
Dim range1 As Range
Dim rng1 As Range, rng2 As Range, myMultiRanges As Range
[Code].....
the problem is when is share the workbook, it generated the runtime error '1004' Command is not available in a shared workbook... make it work even in a shared workbook.
I do not understand why my code returns a Run Time Error"9" Subscript out of range. With the following code, I opened a workbook and then wish to close that same workbook without saving. Eventually I will be pulling information from the workbook but for now I just want it to open and then close right away.
Private Sub cb_NewDate_Change()
ListIndex = cb_NewDate.ListIndex
If ListIndex = 0 Then
Application. ScreenUpdating = False
Workbooks.Open Filename:="I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls"
Application.Workbooks("I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls").Close False
End Sub
Having a problem with a simple udf to calculate values across multiple sheets using the calling cell as a reference point. It works great until you open another workbook and then switch back. At that point all cells calling this udf return a #value! error. If I type anywhere on the sheet all of the values will recalculate but this is less than ideal for the end users here. below is example of concept
Function TestMe()
Application.Volatile (True)
Dim strCallAddress As String
Dim intSubTotal As Integer
strCallAddress = Application.Caller.Address
intSubTotal = Worksheets(2).Range(strCallAddress).Value
intSubTotal = intSubTotal + Worksheets(3).Range(strCallAddress).Value
TestMe = intSubtotal
End Function
whats happening to my workbook. On a worksheet called Data, i'm pulling in a lot og data from a database. Then on another worksheet i'm looking for certain things on the data sheet and counting how many there are.
This all goes along find until i close the workbook, and then re-open.I click the automatically update button that appearsand once it finishs updating all my values are replaced with #Value.
This is the formula i'm using.
= SUMPRODUCT(--(Data!$X$1:$X$49871="4")+(Data!$X$1:$X$49871=4),--(Data!$M$1:$M$49873="FTS-Unix"))
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
I have a need to open a file from my companies intranet. My current method was to open said file via the method that the recorder gave me. However, I would like ot be able to open a said file without having to start open another workbook.
This is the path:
[url]
So the command is this:
Workbooks.Open [url]
Links are not actual links
So what I need to know. Is how can I open this file without opening a workbook. I haven't been able to use the VB "Open Statement" to open a file and I don't believe that I've been successfull using the Filesystem object either.
The code thats generating the error is the following:
For Y = 8 To 131
TmpDate = Empty
Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
TmpDate = Range("A1").Value
For Langd = 1 To Len(TmpDate)
TmpChar = Mid(TmpDate, Langd, 1)
If Not TmpChar = " " Then
TmpComp = TmpComp + TmpChar
End If
Next Langd
TmpDate = TmpComp
TmpComp = Empty
If Len(Dag) = 1 Then
Dag = "0" + CStr(Dag)
End If
Macro continues before the Next-statement...
(it might not be good programming, but I think it should work).
A little explanation to the code.
I have a spreadsheet located on the intranet that has values I need in my spreadsheet. These figures are sorted by date, so I search for the date to find the right figures.
The line Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
works prefectly. I can see the value in my spreadsheet in the cell A1. its the next line that causes the error "Type mismatch".
The value I get from the intranet spreadsheet looks similar to this:
"1 Jul 2006 " (note all the spaces).
What I do is just run it through a loop and cut of all spaces so it will look like this: "1Jul2006" to be sure I dont miss a space or anything.
Now to the funny part.
The error only happens at runtime on the first go.
If I chose to END the macro then and there, and then run it again from the top it works perfectly.
If I set a stopsign to debug the code, it works perfectly on the first go too.
Can anyone explain to me why that happens??
I know enough about programming to handle my syntax errors and so on, but I cant see anything wrong in this one...
Please note that this isnt the the entire code.
I'm building a report on 12 diffrent spreadsheet. The main macro is almost 2000 rows of code, and it call other Subs too (because of limitations in the VBA-editor. A macro cant to be too big), so its impossible for me to post the entire macro...
if I leave the inputbox blank I get an Excel error. I.e. it says that the formula I tried to type contains an error..... Is the Type:=8 not working properly here?
Dim Addr As Range
On Error GoTo Problem
Set Addr = Application.InputBox( _
Prompt:="Enter or Select a cell in the last record", _
Title:="Select Last Record:", Default:=Selection.Address, Type:=8)
If Addr Is Nothing Then Exit Sub
Edit: I guess I should mention that I am trying to retrieve a cell reference from the user via an input box. This cell reference will help me determine the last record in the spreadsheet.
In Excel 2003 I have made a model for evaluating co-workers. The model consist of a number of different questions regarding performance. At the top of the sheet, the user have to select som data from a drop down list, and depending on the answer (upward or downward), som of the questions in the sheets is hidden or shown. For this purpose I have created this string of VB-code in the sheet:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$E$5" And Target.Value = "Upward" Then
Rows("20:41").EntireRow.Hidden = True
ElseIf Target.Address = "$E$5" And Target.Value = "Downward" Then
Rows("20:41").EntireRow.Hidden = False
ElseIf Target.Address = "$E$5" And Target.Value = "" Then
Rows("20:41").EntireRow.Hidden = False
End If...........
He's the issue i'm getting with the code...
Public Sub Auto_Open()
wrkbkName = Application.ActiveWorkbook.Name
'this little snippet of code determine which branch the user is at
'based on the ip address
'if ip is like 192.168.1.xxx then we on welthsrvr
ipadrr = GetIPAddresses(True)
If Left(ipadrr, 9) = "192.168.1" Then
Private Sub Worksheet_Change(ByVal Target As Range)
If Not (Application.Intersect(Target, Range("G9:BF94")) Is Nothing) Then
With Target
If Not .HasFormula Then
.Value = UCase(.Value)
End If
End With
End If
End Sub
However when ever I select more than one cell which already has text in it and press delete I get a runtime error 13 and the debugger highlights this line:
.Value = UCase(.Value)
I get a runtime error 9 on my excel form.
This line is highlighted:
Workbooks("Proposal for XL.xlsm").ActiveSheet.Range("S13:AH13").Copy
I have created a workbook for external users that allows them to track data on a monthly basis and submit to me. Each spreadsheet has a code to sort names alphabetically. Here is the
Sub Button53_Click()
Dim i
For Each i In [B10:K309]
If i.Value = 0 Then
i.Value = ""
End If
Next
ActiveSheet. Unprotect Password:="xxx"
Range("B10:AB309").Select
Selection.Sort Key1:=Range("B10"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
ActiveWindow.ScrollRow = 10
ActiveWindow.SmallScroll ToRight:=-5
Range("B10").Select
ActiveSheet.Protect Password:="xxx", DrawingObjects:=True, Contents:=True, Scenarios:=True
End Sub
Everything works great for the majority of users, but those who are using Excel 97 return a runtime error on the following line: If i.Value = 0 Then. This code was created in Excel 2000 since that was the software our office used.
I'm getting Runtime Error 91 on this line:
destRange = Range(.Cells(destRow, 2), .Cells(destRow, 7))
Here is the overall function:
Public Sub sendRow(myRow As Integer, destinationSector As Integer)
'************************************************************
'1. Copy Row... Cols 2-7
'2. Find First Empty in new Sector
'3. Paste Row on first new Row
Dim myBounds() As Integer
Dim destRow As Integer
Dim destRange As Range
Dim cutRange As Range
Dim y As Worksheet
myBounds = getSecBounds(destinationSector)
This subroutine is being called from the Worksheet_Change event, and should therefore have an active sheet.
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click()
Dim filepath As String
filepath = Range("A100")
MsgBox ("File Appended")
Workbooks.Open (filepath)
Windows("CorrespondenceMaster.xls").Activate
Sheets("Sheet2").Select
Range("DesNo", "LocationPath").Select
Selection.Copy
Windows(filepath).Activate
Range("A2").Select
ActiveSheet.Paste
End Sub
Is there a limit on the amout of pictures you can use with the statement me.pictures.visible? Reason being, I am trying to import 119 pictures into a spreadsheet. When the information is selected form a drop down list, it pulls up the 1 of the 119 pictures. I was able to get 54 pictures input. Everything was going great until the 55th. When it stared giving me an error...
______________________________________________
Runtime Error '1004':
Unable to set the Visible property of the Pictures class
______________________________________________
When I select Debug, it takes me to the line with Me.Pictures.Visible = False
Everything seems to work fine until I enter the 55th picture. If it is that, is there a viable work around?
Getting a error message when opening a workbook "Runtime error 1004" I dont know much about excel and the user explained it to me as best she could . Here is where the script bugs:
Sub auto_open()
fdist = ActiveWorkbook.Name
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Worksheets("f_cumul").Cells.ClearContents
Worksheets("f_cumul").Cells.ClearFormats
Worksheets("vtes_dj").Select
Range("a1").Select
Selection.End(xlDown).Select..............
I have read the other posts on here and swapped, Dim timeinc As Interger to Dim timeinc As Long and Dim timeinc As Double but neither worked. They both make the calculation 0 and I can not figure out why. This macro has worked before and is failing only on this new dataset which I have attached as well.
I am solving this problem on a PC and the macro was built for a Mac but I do not think that should change much as when I run it on a Mac it fails the same
I've been having some problems with my company's spreadsheet in terms of calculations using Add Ins.
Some of the functions work within the spreadsheets - others give me a runtime '9' error,
I have an application using two userforms. Following sequence is used:
1. Open Userform1 (with uf.show)
2. click on a commandbutton in userform1 opens a second userform on top of userform1.
3. Close userform2 with commandbutton on userform2 (userform2.hide)
(I did not want the user to close the UF via the "X" )
Runtime error 402 : Must close or hide topmost modal form first
So, I changed my code so when the user clicks the commandbutton in userform2
userform1.hide (which is the topmost)
userform2.hide
But again I get the same error.
I have a script that usually runs, but all of a sudden gives me a run-time error 6: Overflow error. Basically I'm searching for certain criteria and copying or cutting and pasting lines from one sheet to another. Why I'm getting the error by the code below?
Sub teal()
Dim i As Long
Dim qq As Long
Dim assignmentnum As Long[code]......
When I run the following code it keeps giving me a runtime error 1004.
Code:
Sub ImportData()
Dim fNameAndPath As Variant
Dim wb As Workbook
Dim cNextRow As Long
Dim Ans As String
NextRow = ThisWorkbook.Worksheets("Errors").Range("B" & Rows.Count).End(xlUp).Row + 1
cNextRow = ThisWorkbook.Worksheets("Compare").Range("A" & Rows.Count).End(xlUp).Row + 1
[code]...
I have a bug on a macro that was working until yesterday. I did not write this macro and I cannot seem to fix it. The debug stops at the below command. The data it looks at seems to be in the right format so I think there is something else that is wrong.
Set PTCache = ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=PRange)