SUMIFS With One Condition Being Word As Part Of Cell?
Jun 23, 2014
I am trying to use SUMIFS function in Excel 2010 to add the amount of money spent on a certain category by year. I have the year part of the calculation worked out, but can not seem to get Excel to find a word in a cell as part of the last condition. So far I have:
The A column contains dates, the D column includes the values to be totaled. The G column may include "utility bill for Maine" or "upkeep for Maine" or other text. I want excel to use having the word Maine in column G to be included in the total and those without the word to be omitted.
I am trying to get a Sumifs to work where one condition is activated based on a cell value.
SUMIFS($E$2:$E$6,$A$2:$A$6,"=Region",$B$2:$B$6,"="&B1). I have a drop down in cell B1 that lists all the products.
I want the condition to be active only when I make a selection in the drop down, if I don't then I want the Sumifs to ignore the second condition and do a Sum on Region.
I would like to use an (I think) easy SUMIFS formula. In this case I'm using only 3 criteria, and 2 of them work perfectly. With the third I want to SUM only IF the series begins with 112 in the example.
I'm working on a macro to change the color of the row between column W to AN if in column K the value is "FCA" (without quotes).
So far I have this, but it doesn't work:
Code: Sub Test() For Each cell In Range("K1", Cells(Rows.Count, "K").End(xlUp)) If InStr(1, cell, "FCA") Then Range("W" & cell.Row & ":AN" & cell.Row).Interior.ColorIndex = 3 End If Next cell End Sub
I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
I'm working on a spreadsheet designed to track total overtime hours worked in a year; on the spreadsheeet is a column to keep track of each day's total OT, the week's total OT, as well as a column to track the year's total. There is a formula in the week total, but the year total is calculated via a macro (day of the week total, added to the existing year total, result updated, so, each day has it's own button and macro). We have a shift that works a different week than the shift that needs to track overtime, but still must be included in the list.
Therefore, I created a column to place the shift designator so there can be recognizable diffrerentiation. With quite a bit of help from this board, and others, I've created (or been kindly given) the following macro (this is just a part of it) to total the day's overtime and existing year overtime and input the result into the cell. I now need to have this executed only when the condition I specify (say, in cell D1) is met (that would be the shift, for example the text M1 or SST). Please note, the week totals are only for user reference - they do not come into play for calculations of year totals. The below macro actually takes the totals from a day of the week and adds it to the existing year total, placing the result in the year total column.
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
I have a workbook with about 8 sheets that is used for pricing vehicles with options.
On the first sheet is the list of about 40 vehicles. I would like to insert a command that IF the quantity of vehicle X = 1 (all others would be blank) then insert a MS Word document that contains the proposal.
The MS Word document could be a worksheet if necessary.
In cell A1, I have three possible text strings: (1) "change/s: changed the color green to red", (2) "change/s: changed the color from green to red, changed the size from big to small", or (3) "changed the color from red to green".
I need a formula that will look at a text string, and if there is a comma in the string, it finds the word "change/s" and substitutes it with "changes", if it finds no comma, it substitutes the word "change/s" to "change", and if the word "change/s" is not in the text string at all, it leaves that text string unchanged.
Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
I need to count how many times the word Test is in the range B4:H9 with
Range N2 = Test the formula below works if Test is only in the cell once.
=COUNTIF($B$4:$H$9,"*" & N2 & "*")
But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
I have a bunch of cells in column b that have products.
Column B Dell 24" lcd vaio sony laptop 8.0 mpxl kodak camera photoepsonprinter
Basically in Column A I want a formula that'll say.
If the word "dell" is somewhere in cell b1, then put the word "Dell" in cell a1. If the word "sony" is somewhere in cell b1, then put the word "sony" in cell a1.
And then so on and so forth down through column A. The brand names are potentially endless, so is there a easy way to on like a seperate sheet make a list of brand names and have it pull from there?
Originally I made a if function that said if the brand name was contained in the cell then output the brand name, but that caps at 7 for the amount of brands i can use....
I have the below formula working correctly. However the issue is when it pastes and fills down values its using H1 reference in the formula even when it goes to the next column. So basically when it goes to cell I2 it should update the sumifs formula to lookup I1 instead of H1 and so on and so forth for all columns till the loop stops.
VB: Sheet1.Activate Dim frmla As String frmla = "=SUMIFS($C:$C,$A:$A,H$1,$B:$B,$G2)" Range("H2").Activate Do Until ActiveCell.Offset(-1, 0) = "" ActiveCell = frmla ActiveCell.Offset(0, -1).End(xlDown).Offset(0, 1).Activate Range(ActiveCell, ActiveCell.End(xlUp)).Select Selection.FillDown ActiveCell.Offset(0, 1).Activate
In a workbook I have a tab with multiple columns containing names, activity codes, billed hours, etc. On another tab I have created a budget for which I use the Excel SUMIFS function to check the database in the first tab for relevant entries and add them together in the budget sheet.
Now here's for the tricky part. On the budget sheet the names are not mentioned, only the job titles. So these are grouped together. This means that the first tab shows only names, while the budget tab only shows the function title.
The function I have used thus far is this:
Formula: [Code] ......
The first part refers to the column containing the billed hours, the second part refers to the column containing the names (criteria range 1), the third part refers to a specific name (criteria 1), the fourth part refers to the column containing the activity codes (criteria range 2), while the fifth part refers to a specific activity code (criteria 2).
This works really well as long as the budget tab only mentions the names, yet it only aggegates at the job title level. Would it be possible to use the same SUMIFS function to search the database for, say, all the names that fall within one specific job title? Essentially that would result in this somewhat bulky function:
I have a report for which I would like to set up a Quarterly summary section. There are 6 working teams listed in my table and I have created two cells with data validation to allow me to specify which team and for which quarter I would like to pull data. My intent is to have a formula in one cell which can extrapolate the quarterly team information based on the values in the data-validated cells.
My worksheet is set up so that:
The data table (tblD) contains metrics for all teams for the full yearTeam names appear in Column A of the table and the reporting month appears in Column BCell M10 has data validation so that the only choices are: Q1, Q2, Q3, or Q4Cells X1:X4 contain the quarterly values mentioned aboveCells Y1:Y4 contain array references, so that Cell X1 = Q1 and Cell Y1 = {"January", "February", "March"}Cell N10 contains a VLOOKUP which returns the appropriate array from Column Y based on value in Cell M10Cell L11 has data validation so that the only choices are the 6 team names
Now I was able to get quarterly information by manually typing the 3-month array into my formula like so:
While inspecting the formula in the formula bar, I noticed that the values listed in the array appeared with double quotes (i.e. "{""January"",""February"",""March""}"). I tried every permutation of typing the array in the lookup cells I could think of, but none would allow my formula to properly calculate the total I needed.
{"January", "February", "March"} {January, February, March} January, February, March
Although I don't often utilize arrays in my formulas, I do employ them from time to time. I'm hoping there's some factor I might have overlooked which keeps my formula from working. is there an issue preventing array references stored in cells from being used in formula?
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document. For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document 'or Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
I have come across a problem which delivers 0 as a result, I am doing sumifs which i never had a problem before with, however I am trying to include a cell which is variable by using the & in collating data, the raw file also contains that criteria in 1 column so I have no mismatch.
I am trying to create a SUMIFS function to sum estimated hours for specific systems that do not have a Completed date. I do not want to sum remaining hours if it has been completed. i.e.
I'm trying to set up my formula so that if there is no criteria match, rather than returning 0 it leaves the cell blank.
(I recommend skipping the below text and just opening the attached spreadsheet, instructions/what I'm looking for and trying to achieve and well laid out requirements and examples are in the spreadsheet and much more thoroughly explained then I can do below)
I'm setting up a table that grabs data from columns in a raw data spreadsheet.
For the purpose of the table I'm making, the formula needs to match up both the House, and the year/month from the raw data sheet, then if the two match and are side by side, return the value to the right either in the Plan Field or the actuals field depending on which field in the table the formula is in. If there is no entry or matching criteria for both the house and Month then it should leave the cell blank, not show a 0
So I have a SUMIFS formula that I'm trying to set up so that if there is no criteria match it leaves the cell blank.
So =SUMIFS(sum range, criteria& range, criteria&range), if no matching criteria can be found, leave cell blank, else if matching criteria found then return value from the sumrange.
Yeah kind of hard to follow, so attached is a very detailed and well laid out spreadsheet showing the example of what the formula is, how it's working/what it's returning and an example of what i want it to return/look like, so please check out the spreadsheet, it explains it a million times better.
Essentially though i want the formula set up so that if there is no criteria match, rather than returning 0 it leaves the cell blank.
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.
I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".
I have 2 basic parts to a Macro which need to be separated by a pause of 1 second, before proceeding to the next part of the macro. Then pause for 1 second, and loop.
Application.Wait is no good to me as the spreadsheet must remain live, editable, and receiving updates from an external program linked via DDE. Below is the ...
i have a column of data part number part text e.g 7w1,8b1 in the next column i want to write a function that will look at the other and dependant on whats in it place a word e.g. for 8b1 i need it to look at the "b" and enter beauvale if theres no "b" but a "w" enter wollaton, i have tried an if function and used "*b*" but it doesnt seem to like wildcards ....
