Same Colors To Same Data Series
Nov 27, 2013
I have a big set of data and I want to create different graphs in different tabs with it.
So Imagine that in Tab 1 I want to do the sales forecast for the next five years for product A for all countries in Europe
Tab 2 would be the same, but for product b
Tab 3 the same, but for product c
So with dynamic tables in each tab I can easily do my graph
The problems is that since values vary per product country A in tab 1 is red, in tab 2 is blue and in tab 3 may not exist.
How can I set up a template so taht I do not have to color code each country in each tab? I.e. I want Spain to be blue in all my graphs in the workbook, Italy red and so on...
View 1 Replies
ADVERTISEMENT
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Jul 7, 2013
My pallet lost color-coding - if I hover over each little scare it displays the names for the colors and if I click on them they color the cells with the right colors, but the palette itself lost the visual display of colors except for 8 colors: black, blue, red, magenta, yellow, cyan, and white.
I use color-coding of cells a lot and I find it difficult to work without visual clues. At least the hover-support allows me to get the work done, but with difficulty.
View 12 Replies
View Related
Mar 18, 2007
i have a file which consist of sheets called june 2007, color, and report. When i click on the command button on sheet june 2007 the code works and copies some data into sheet called report in that case some of them white color copied over and some of them blue.
Since at the actual file there are nearly 500 rows and 32 columns when the report works, i want to sort each colors individually by looking the values at column called ETA (column "E")
white rows should be sorted in ascending order in column e wise
blue rows also should be sorted in ascending order in column e wise
each colors should be sorted individually
View 9 Replies
View Related
Oct 4, 2006
How can i link colors used in charts to companies i have i my database. Now excel provides colors in a certain sequence but this is not what i want. I attached a file in which i for example wants to create pie charts of the company's sales. What do i have to do to give each company its own color?
View 2 Replies
View Related
Oct 17, 2006
Within the Workbook events there is a "Before_Print", however I also need something like "After_Print" which does not exist (as far as I can tell).
I have several rows of data which alternate colors. When I print it I want to take out the fill (so as to save ink) - which I can do in the "Before_Print" event. [No problem.] However, once it is done printing I need to restore the alternating colors, but I cannot think of any event or trigger which would enable this.
I have thought through several things and the closest thing I can think of is setting up a timer. But there is of course no way to now how long to set it for. [Before/After Save also has the same "issue".]
View 9 Replies
View Related
Apr 30, 2009
I have a sheet with alternating colors (gray,white) for the rows. This makes it easier to read each individual rows data, just like some printer papers. The problem i have is when i sort the data it takes the background color with it and i end up with a mess. does anyone know how to get around this.
View 2 Replies
View Related
Jan 6, 2013
I'm trying to create a formula that can display colors based on the strength of the margin of victory of a candidate, take these two examples for instance.
County
Frank
Cole
Dean
Total
MOV
MOV%
[Code]....
I want to be able to draw in the outline of these counties (or at least the cell proceeding the MOV%) displaying the color that corresponds with the winner of that county. The added twist would be to shade the color depending on the Margin of Victory (MOV) as well. The closer the vote, the lighter (or mixed?) the cell (or county) would be. If it could be at all possible I would really be cool to mix both colors so that a result 100% for one candidate would get a color 100% pure while a 17% MOV would get a color 17% more of the winning candidate than of the loser (or losers) colors. I don't think a VBA is necessary for this one.
View 2 Replies
View Related
Dec 9, 2008
in a data validation list can we show colors,assume the following list as a data validation list
Item #
Orange =50
Apple =60
Banana=56
Mango = 40
in this list i want to give colors (as shown) to these two items
View 13 Replies
View Related
May 5, 2008
I have to create a chart XY Scatter plot in excel. I have to differentiate the data points color based on the another column "category". Now I can change the data points color manually. Since the number of points is huge, is it possible to color the data points based on a column?
View 5 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related
Nov 1, 2011
I have a combination chart with data from Sun thru Sat (7 days). My manager wants to display only the weekday data (M,T,W,Th,F) and remove the weekend data (Sat,Sun). However, I also need this data to be included in other charts I need. I was thinking in years past, that I was able to remove specific data from the chart directly without having to alter or change the spreadsheet data? I have copied a second set of data and hid the weekend data, however, I have gaps in the data, which I need to remove in the chart display. Not sure what to do, or the best avenue?
View 2 Replies
View Related
Aug 22, 2014
I consider myself decent at Excel, but I don't have quite the depth of knowledge I would like. Here is my issue:
I currently have a series of 50 numbers for each row on a 300 row spreadsheet. I would like to write a formula that identifies the six largest numbers in that series and adds them together. So, for example, if the series was 8-6-4-4-4-5-1-1-0-15-3-9, the formula would spit out 47 (15+9+8+6+5+4)
How do I write that kind of formula?
View 8 Replies
View Related
Sep 21, 2011
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
View 5 Replies
View Related
May 15, 2008
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies
View Related
May 8, 2014
There is data which comprises of Part (#), Discount (%), Start Date & End Date. In this data Part (#) can repeat but Start Date & End Date periods will not overlap.
I want to write a formula which looks up into this whole data set and give me result as TRUE or FALSE and get Respective Discount (%) in another cell. True if for a specific Part (#) Discount (%) is applicable on Current Date.
Attaching sample excel file for example of data set.
View 7 Replies
View Related
Nov 13, 2008
The full s/s stretches to nearly 350,000 rows and consists of over 20,000 series of data, between 6 and 30 rows deep, in columns A:J.
In column I of each series, on rows 3, 4 and 5 there are three numbers.
The second number is to be subtracted from the first with the answer being divided by the third.
If possible, the answers should appear in the rows directly beneath these three numbers.
Because there are so many series of data it isn't feasible to manually input the formula and I'm searching for a macro(s) which can do it automatically.
Can anyone please suggest code to help me to this end?
View 10 Replies
View Related
Jul 17, 2007
I want to match rainfall with historical rainfall.
It is quite simple to match a single value but I want to mtach a series or closest series (or series')
Eg for the last 6 measurements I get an couple of columns like this:
Time value
1 5
2 4
3 5
4 2
5 5
6 5..........
View 10 Replies
View Related
Jun 23, 2014
So I have this given: Screen Shot 2014-06-23 at 3.53.01 PM.jpg and I am trying to fit my data to the graph I have in excel below. There is only one x-axis; suction pressure. However, there y values are dependent on two variables, discharge pressure and outdoor air temp.
How can I make the data on this sheet: Screen Shot 2014-06-23 at 3.53.05 PM.png
dependent on both axes?
View 2 Replies
View Related
Dec 13, 2012
I have a list with hundreds of customers. Each customer has two measures (i won't bore you with how they are calculated)
1) % Coverage by Salesman
2) % Of Opportunity Won
What tips and tricks can you give me to take my analysis to the next level? The example is a very limited sample and the data was made up using a formula so correlated very well, i've chucked in a couple of anamlous results to make it a bit more realistic.
One of the main things i would like to see is a correlation "score". I suppose if the two series correlated perfectly then the score would be 100%. The less they correlate, then the lower this score gets....
In business terms, if i can run this rule over thousands of customers and get a good correlation - then it becomes a conversation with the salesman to show them that doing those pesky, boring coverage calls has a measurable impact on sales...and here is the number to prove it...
How I can interpret this data?
View 1 Replies
View Related
Sep 11, 2006
I've tried several things to accomplish this with no luck, but I'm sure it's not too tough to do:
On my worksheet, I am entering columns of cells with alphanumeric data. The data are actually thousands of reference numbers that need to go in chronological order, with only the numerals changing (e.g., ABC0001DEF, ABC0002DEF, ABC0003DEF..., with "ABC" and "DEF" always the same).
I can create a series just fine if I leave off the "DEF" part of the reference numbers (by selecting the first couple cells in the series and using the fill handle), but I can't get the same results with the numerals "nested" within the reference numbers (i.e., ABC####DEF).
It sure would save me a lot of typing to be able to create a series to fill in all my reference numbers!
View 6 Replies
View Related
Mar 1, 2012
I have a spread sheet with some data strings in Column E.
In Column A I want to extract a series of number from within the data in column E.
Example data in Column E
C:cleanedsystems1021_update_log_2-12-2012.csv
C:cleanedsystems42_update_mail_log_2-12-2012.csv
I created a formula in column A "=MID(E2,20,4)". I drag this down the column and I get the following results
1021
42_u
The first result is fine but the problem is the second result. Because I am looking at fixed length I am often getting something other than the file number which I seek.
Is there a way to do a formula that will go to my starting positions (this is a constant starting point) and then look for the numbers before the first "_" as a stopping point? The maximum will always be 4 digit numbers but the problem is there are 1-3 digit numbers as well.
View 4 Replies
View Related
May 31, 2012
How to format an Excel table in a forum post!
I have the following table
Code:
seqIdpointsMAEMFE
1033022
1122-511
12-10-1018
130-517
14-11-117
1630-620
1712-120
186-444
190-126
I want to create a stacked chart with seqId as the x axis, and the other 3 columns are values on the y axis.
Excel is making seqId a data series, I don't want it to do that. How do I change it? This is what I have now:
View 9 Replies
View Related
Apr 10, 2009
let's get str8 to the point.
My data sheet comprises of projects in MW. So I have the name of a project and there power in MW.
I would like to fetch all projects that have a similar MW power within a range of + and - 100, and align them one under another.
i.e.:
project 1 = 1000 MW; year=2007
project 2 = 1200 MW; year=2008
project 3 = 900 MW; year=2008
project 4 = 1100 MW;year=2009
project 5 = 800 MW;year=2009
I need a formula that gives me fetches all projects that are =1000 or + and - 100 MW
the result should be the following :
project 1 = 1000 MW; year=2007
project 3 = 900 MW; year=2008
project 4 = 1100 MW;year=2009
I hope I made myself clear...in any case...I'll pass the torch to the Master that can work this dilemna out.
View 9 Replies
View Related
Nov 9, 2006
Trouble: I need to replace address of datacells for serias of chart
Result: data for serias will be some lines above or below as i need
simv = Workbooks(1). Names("adr").RefersToRange.Formula
num = Len(simv)
For i = 1 To ActiveChart.SeriesCollection.Count
oldadr = ActiveChart.SeriesCollection.Item(i).Formula
res = Left(oldadr, Len(oldadr) - num - 3) + simv + Right(oldadr, 3)
ActiveChart.SeriesCollection.Item(i).Formula = res
Next i
simv - my new address data for all serias this code is working on Excel 2003, but not working on some other versions. Beause "Formula" may has different structure :
version 2003: =SERIES(,,'C:...[macros.xls]Sheet2'!$B$8:$M$8,1) other version:
=SERIES('C:...[test.xls]#Source'!$C$6:$D$6,'C:...[test.xls]#Source'!$E$2:$AC$2,,1)
View 3 Replies
View Related
Feb 21, 2007
I am creating a timeline using a stacked bar graph. The 3 colums in the source spreadsheet are title,start time and duration. The Two data series are start time and duration. I hide the start time series to give me timelines for each row in the spreadsheet. This works fine. What I'd like to do is to group the rows by title and distinguish by colour in the duration series but this doesn;t seem possible? I hope I've made myself clear.
View 4 Replies
View Related
