So I have this given: Screen Shot 2014-06-23 at 3.53.01 PM.jpg and I am trying to fit my data to the graph I have in excel below. There is only one x-axis; suction pressure. However, there y values are dependent on two variables, discharge pressure and outdoor air temp.
How can I make the data on this sheet: Screen Shot 2014-06-23 at 3.53.05 PM.png
dependent on both axes?
Im plotting data on a Line-Column 2 Axes Chart which works really well with 4 data series (2 column, 2 Line) but when adding a fifth data series, the fourth disappears from view. I can see its still there cos I can display the values but I cant get the line to appear. The values for the 5th series are also similar to other series values so its not like the chart cant display it....are there limits to the number of series on such a chart?
View 9 Replies View RelatedI'm trying to change 115 charts so that the Xvalue axes (Y-axes) will start on the lowest value of my data series. This is what I've come up with so far:
[Code] .....
What is the syntax to set instead of X so that all Xvalue axes is set to the lowest Data series value in individual chart?
My goal, albeit a simple one, is to return and store a single value within a Series. It is the first in the series collection.
Dim MyPoint As Integer
MyPoint = Worksheets("My Worksheet").ChartObjects("My Chart").Chart.SeriesCollection(1).Points.Item(1)
However, after i type the period after "Points", no autocomplete listing appears, and when the expression is evaluated, I get the error 'Runtime Error 438 - Object doesn't support this property or method'. How to accomplish the task of retrieve a single data point in a series and 2) Why the Points and Item methods don't seem to work as described in the help documentation
I have been looking for a printable overview of Excel VBA that covers the fundamentals like program structure and syntax, but have been unable to find anything other than pure examples (like many 3rd party sites) or unprintable references (such as Microsoft's help file). If there is a site that covers the fundamentals of using Excel VBA in some depth
I have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.
If I were to do it manually 365 times, the macro would look like this:
Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)
repeat for rows 2-365
Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.
Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long
Set rng = Worksheets("Sheet1").Range("A1")
[Code] .....
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
I have a log where I'm recording daily readings of a pipette. Each day three readings are taken and I have each stored as a dynamic range so that I can monitor how in control my process is. However, when I graph it, I would like it to be one continuous line graph (Three readings from day one followed by three readings from day two, etc.). I'm having difficulty doing any sort of combination.
View 7 Replies View RelatedI am trying to read a value in cell A1 and make say cell B1 read the same. The data in cell A1 is a real time percentage value that gets updated every lets say 10 secs. Every time the data is updated the new value goes into the next cell A2, A3, A4..... and so on. Every time it gets updated (i.e into A1,A2,A3,A4.....and so on), I want to read the new value each time in B1.
View 9 Replies View RelatedI have an XY chart that I would like to have the user select a single data point in the chart and be able to add a comment in a table corresponding to that point. For example: if the x-values are in A1:A10, y-values are in B1:B10, the user can select a point, say the 4th point, have some code run that will enter a text string into cell C4. I can manage the code to add the text to the appropriate location, but I'm having trouble with 2 things.
First, how can I ensure that the user has selected a single point (as opposed to the entire series or the chart background)?
And second, how can I determine which point is selected? I think I need to determine the point's item number in the SeriesCollection, then offset that number of rows in my data table. But I can't find a way to retrieve that number.
I have the following syntax in B1: "1,2,3,5,6". and I need VBA to take the very last number out of that list, and increase by four in single steps. For example: before the code: "1,2,3,5,6" and then after it "1,2,3,5,6,7,8,9." The code must be flexible, though, because it will be running within another Macro, and it must work whether the last number in the list is 1 digit ("...4,5,8"), 2 digit ("...34,35,36") or 3 digit ("...111, 113, 114"). Those three examples would be changed into "...4,5,8, 9, 10, 11" "...34,35,36, 37, 38, 39" "...111, 113, 114, 115, 116, 117".
View 4 Replies View Relatedmy VBA code does some simple editing. Something I would like it to do is make the x-axis and y-axis lines be editable. What I mean is say for editing the Plot area background you would use this
ActiveChart.PlotArea.Format.Line.ForeColor.RGB = RGB(0, 0, 0)
I am looking for the equivalent to do the x and y axis lines.
I have a cell with data such as: a0001-0004, a12, C8AF7-8, b17, j35-40 and i want it to output in the same cell(basically write-over the data): a0001, a0002, a0003, a0004, a12, C8AF7,C8AF8, b17, j35, j36, j37, j38, j39, j40.
View 4 Replies View RelatedI've got an excel worksheet that contains charts 5-14, each with different max axes on primary and secondary scales. Right now the code below works to adjust the axes, however I have pasted this into a script 10 times, once for each chart with different references to the chart number, the max primary axis and max secondary axis. how I could write the following as a loop so that I don't need to have to repeat this routine in my code?
Sub ChartsBillingsShare()
ActiveSheet.ChartObjects("Chart 5").Activate
With ActiveChart
.HasAxis(xlValue, xlPrimary) = True
.HasAxis(xlValue, xlSecondary) = True
End With
ActiveChart.Axes(xlValue).Select
With ActiveChart.Axes(xlValue)
.MinimumScale = 0
.MaximumScale = Range("Y6").Value
End With.................................
I have the theoretical set:
year $ %
2003 100 10
2004 120 20
2005 145 30
2006 205 40
2007 300 50
Could I make the year the X-axis and make 2 y-axes on the same graph in excel that each datasets would be correlated to (eg. for money it'd be from 0 to 300 while for percent it'd be from 0 to 50)
For an economics assignment I would like to graph price elasticity with price on the 'y' axis and units on 'x'. I have not found a way to do this in Excel, can someone assist?
View 6 Replies View RelatedI'm trying to create a code that when run hides a selection of columns and defines the minimum and interval value for a chart on the active worksheet. My attempt is assigned to the 'update skills' button at the top of the "GRAPH" worksheet of the attached workbook.
View 2 Replies View RelatedI run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
I have a combination chart with data from Sun thru Sat (7 days). My manager wants to display only the weekday data (M,T,W,Th,F) and remove the weekend data (Sat,Sun). However, I also need this data to be included in other charts I need. I was thinking in years past, that I was able to remove specific data from the chart directly without having to alter or change the spreadsheet data? I have copied a second set of data and hid the weekend data, however, I have gaps in the data, which I need to remove in the chart display. Not sure what to do, or the best avenue?
View 2 Replies View RelatedI consider myself decent at Excel, but I don't have quite the depth of knowledge I would like. Here is my issue:
I currently have a series of 50 numbers for each row on a 300 row spreadsheet. I would like to write a formula that identifies the six largest numbers in that series and adds them together. So, for example, if the series was 8-6-4-4-4-5-1-1-0-15-3-9, the formula would spit out 47 (15+9+8+6+5+4)
How do I write that kind of formula?
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies View RelatedI have a big set of data and I want to create different graphs in different tabs with it.
So Imagine that in Tab 1 I want to do the sales forecast for the next five years for product A for all countries in Europe
Tab 2 would be the same, but for product b
Tab 3 the same, but for product c
So with dynamic tables in each tab I can easily do my graph
The problems is that since values vary per product country A in tab 1 is red, in tab 2 is blue and in tab 3 may not exist.
How can I set up a template so taht I do not have to color code each country in each tab? I.e. I want Spain to be blue in all my graphs in the workbook, Italy red and so on...
There is data which comprises of Part (#), Discount (%), Start Date & End Date. In this data Part (#) can repeat but Start Date & End Date periods will not overlap.
I want to write a formula which looks up into this whole data set and give me result as TRUE or FALSE and get Respective Discount (%) in another cell. True if for a specific Part (#) Discount (%) is applicable on Current Date.
Attaching sample excel file for example of data set.
The full s/s stretches to nearly 350,000 rows and consists of over 20,000 series of data, between 6 and 30 rows deep, in columns A:J.
In column I of each series, on rows 3, 4 and 5 there are three numbers.
The second number is to be subtracted from the first with the answer being divided by the third.
If possible, the answers should appear in the rows directly beneath these three numbers.
Because there are so many series of data it isn't feasible to manually input the formula and I'm searching for a macro(s) which can do it automatically.
Can anyone please suggest code to help me to this end?
I want to match rainfall with historical rainfall.
It is quite simple to match a single value but I want to mtach a series or closest series (or series')
Eg for the last 6 measurements I get an couple of columns like this:
Time value
1 5
2 4
3 5
4 2
5 5
6 5..........
I have a list with hundreds of customers. Each customer has two measures (i won't bore you with how they are calculated)
1) % Coverage by Salesman
2) % Of Opportunity Won
What tips and tricks can you give me to take my analysis to the next level? The example is a very limited sample and the data was made up using a formula so correlated very well, i've chucked in a couple of anamlous results to make it a bit more realistic.
One of the main things i would like to see is a correlation "score". I suppose if the two series correlated perfectly then the score would be 100%. The less they correlate, then the lower this score gets....
In business terms, if i can run this rule over thousands of customers and get a good correlation - then it becomes a conversation with the salesman to show them that doing those pesky, boring coverage calls has a measurable impact on sales...and here is the number to prove it...
How I can interpret this data?