Creating A Series From Alphanumeric Data?
Sep 11, 2006
I've tried several things to accomplish this with no luck, but I'm sure it's not too tough to do:
On my worksheet, I am entering columns of cells with alphanumeric data. The data are actually thousands of reference numbers that need to go in chronological order, with only the numerals changing (e.g., ABC0001DEF, ABC0002DEF, ABC0003DEF..., with "ABC" and "DEF" always the same).
I can create a series just fine if I leave off the "DEF" part of the reference numbers (by selecting the first couple cells in the series and using the fill handle), but I can't get the same results with the numerals "nested" within the reference numbers (i.e., ABC####DEF).
It sure would save me a lot of typing to be able to create a series to fill in all my reference numbers!
View 6 Replies
ADVERTISEMENT
Sep 24, 2013
I need to create a series which must look like in third column. This can be done using concatenate and & function but what i need that 01 & 02... must get autogenerarted and i have to use only first two column as source.
MON
MON001
MON-01_MON001
MON
MON001
MON-02_MON001
View 9 Replies
View Related
Feb 21, 2008
I have a need to expand data rows such as the following example:
A cell in a column of alphanumeric characters contains for example: 9,2,36J,10-13,42L-42N
In this example I need to replace this row with 10 new rows (deleting the orginal) so they would be expressed like this:
9
2
36J
10
11
12
13
42L
42M
42N
View 9 Replies
View Related
Feb 25, 2010
I would like to create a series of folders in explorer using a range of cells A1:A162 for the names of the folders. Wondering if there is a way that I can automate this using VBA versus doing it manually .
View 9 Replies
View Related
Aug 25, 2006
I have a line Chart and want to create a static horizontal/indicator line.
I cannot create a new series to plot this horizontal line as I'm using an external data source (OLAP cube) as source data for the chart.
View 8 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Jun 23, 2009
I need to automatically populate a column with an alphanumeric MFR0001 to MFR9999 and am currently using the formula below to add 1 to the start point (A1)...
A1=MFR0001
Formula in A2 =LEFT(C1,3)&(RIGHT(C1,4)+1)
This works perfectly if I start at MFR1000, but breaks and drops the 000 if I use it on the number I need to start with (MFR0001).
View 3 Replies
View Related
Jan 21, 2013
I am trying to sort alpha numeric data like so -
PA1
PA2
PB1
PB2
PB10
When I sort, the alphabet part is sorted right, but the number part is is not what I want -
PB10 is right below PB1-
PB1
PB10
PB2....
View 2 Replies
View Related
Feb 8, 2010
Ok, before any one shoots me down, i have looked around the forum and the internet for a answer, Im im half way there.
I have a column in my worksheet which contains alphanumeric data, I also have a Custom menu option to sort the worksheet but 3 columns.
No i know if i have a column contains the following ....
View 7 Replies
View Related
Jan 29, 2008
I'm looking for a formula or function to identify cells that are alpha numeric. The alpha is not necessarily in the same place (i.e. 1st, 4th. etc) in each cell. Some cells are all numeric.
What can I do to identify cells that are alpha numeric?
View 5 Replies
View Related
Jan 25, 2010
I have in two cells :
a1 b1
1m 1-3-6-11-17
how can I get:
1m1
1m3
1m6
1m11
1m17
using vba code.
View 8 Replies
View Related
Mar 2, 2014
I'm currently working on a spreadsheet for my husbands work in a school environment. All was going well until I hit a wall with the alphanumeric data of the current uk stats system. Is there any way of getting my 4c...4b...4a...etc. to chart?
View 1 Replies
View Related
May 18, 2009
I require a custom formula for in cell data validation of an 5 digit alphanumeric entry. The valid format is ANNNN (1 x alpha & 4 x numeric). Case of the aplha is not an issue.
View 3 Replies
View Related
Sep 26, 2012
I'm running Excel 2007 on Windows 7.
I've got a crude code which searches for multiple alphanumeric data. The code is below:-
Code:
Cells.Find(what:="1kp", _
LookIn:=xlFormulas, _
lookat:=xlWhole, _
[Code]...
I want to make this code more efficient by searching for either 1kp, 2kp or 3kp in one process & 'doing the same thing' at one time. How do I achieve this?
Explained slightly differently, the code should look something like this:- Find 1kp or 2kp or 3kp. Then do something with the found results.
View 1 Replies
View Related
Jul 3, 2013
I have a column of data that contains text such as 'as per A3', 'B4 requested' and 'as per F6 Mark' (these aren't cell references).
I'm trying to find a formula that will just strip out the 'A3', 'B4' and 'F6' element of the text. I've tried SEARCH with wildcards but it's not working, and can;t use the LEFT RIGHT or MID functions due to the inconsistent data.
View 4 Replies
View Related
Jun 16, 2006
Columns A & B contain several thousand Project Numbers (e.g., P1052, PA844, etc.). Many of the Project Numbers in column B are the same as in column A, but column B also has additional (i.e., newer) Project Numbers scattered throughout. Ideally, I would like to use a built-in function (versus a custom function if possible) that compares all the Project Numbers in both columns and then separately lists those that are unique to column B.
View 9 Replies
View Related
May 11, 2013
Formula to automatically do these operations in the table below?
"column I1" contain data which I need to find in between columm B1:H1; and marked them red.
I need to do same operation for row2 to row4. I need a formula that can automatically find and mark the data in red.
I need to put a formula in B6 to count the data marked in red for column B1:B4 and do the same operation for C6,D6...H6.
A
B
C
D
E
F
G
H
RESULTS
p1
11
01
12
22
21
M1
10
11
[Code] ..........
View 9 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related
Nov 1, 2011
I have a combination chart with data from Sun thru Sat (7 days). My manager wants to display only the weekday data (M,T,W,Th,F) and remove the weekend data (Sat,Sun). However, I also need this data to be included in other charts I need. I was thinking in years past, that I was able to remove specific data from the chart directly without having to alter or change the spreadsheet data? I have copied a second set of data and hid the weekend data, however, I have gaps in the data, which I need to remove in the chart display. Not sure what to do, or the best avenue?
View 2 Replies
View Related
Aug 22, 2014
I consider myself decent at Excel, but I don't have quite the depth of knowledge I would like. Here is my issue:
I currently have a series of 50 numbers for each row on a 300 row spreadsheet. I would like to write a formula that identifies the six largest numbers in that series and adds them together. So, for example, if the series was 8-6-4-4-4-5-1-1-0-15-3-9, the formula would spit out 47 (15+9+8+6+5+4)
How do I write that kind of formula?
View 8 Replies
View Related
Sep 21, 2011
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
View 5 Replies
View Related
May 15, 2008
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies
View Related
Nov 27, 2013
I have a big set of data and I want to create different graphs in different tabs with it.
So Imagine that in Tab 1 I want to do the sales forecast for the next five years for product A for all countries in Europe
Tab 2 would be the same, but for product b
Tab 3 the same, but for product c
So with dynamic tables in each tab I can easily do my graph
The problems is that since values vary per product country A in tab 1 is red, in tab 2 is blue and in tab 3 may not exist.
How can I set up a template so taht I do not have to color code each country in each tab? I.e. I want Spain to be blue in all my graphs in the workbook, Italy red and so on...
View 1 Replies
View Related
May 8, 2014
There is data which comprises of Part (#), Discount (%), Start Date & End Date. In this data Part (#) can repeat but Start Date & End Date periods will not overlap.
I want to write a formula which looks up into this whole data set and give me result as TRUE or FALSE and get Respective Discount (%) in another cell. True if for a specific Part (#) Discount (%) is applicable on Current Date.
Attaching sample excel file for example of data set.
View 7 Replies
View Related
Nov 13, 2008
The full s/s stretches to nearly 350,000 rows and consists of over 20,000 series of data, between 6 and 30 rows deep, in columns A:J.
In column I of each series, on rows 3, 4 and 5 there are three numbers.
The second number is to be subtracted from the first with the answer being divided by the third.
If possible, the answers should appear in the rows directly beneath these three numbers.
Because there are so many series of data it isn't feasible to manually input the formula and I'm searching for a macro(s) which can do it automatically.
Can anyone please suggest code to help me to this end?
View 10 Replies
View Related
Jul 17, 2007
I want to match rainfall with historical rainfall.
It is quite simple to match a single value but I want to mtach a series or closest series (or series')
Eg for the last 6 measurements I get an couple of columns like this:
Time value
1 5
2 4
3 5
4 2
5 5
6 5..........
View 10 Replies
View Related
