I currently have a tab on my spreadsheet named CSV. I have a macro that when called saves the information on that tab and sends it to a folder saved as a CSV file.
However this tab has a lot of information on and i want it so send it with only the information needed at the time. the data i want to send is in Columns A to AM and has rows down to 7392. I only want it to save the file with the data in the rows that has "Export" in Column AQ ignoring any other rows of data that i dont need it to send
I dont want anything to happen to the CSV tab ie delete lines etc as files will be getting sent regulary from that sheet still but with the data constantly updating in different cells
I have a problem concerning sending an active word document via mail. I have a worksheet with various information in it, that I am exporting to a word document. I then want to send the word document via email. I want to do this without saving the changes in the word document. I am working with excel 2010. I have posted some of my code below.
VB: Sub letter() Dim myWord As New Word.Application Dim adr As Variant
[Code]....
I get the following errormessage: "Compile error. Wrong number of arguments or invalid property assignment"
I have a worksheet in my workbook that contains data for 25 different airfoils, each one in a cell space of 3 columns and 50 rows. In order to do some analysis on these airfoils, I need to save each 3x50 as separate text file to define input for analysis code. How can I do this in VB in one macro?
I was wondering if there is a way to write a macro that will take an excel file that I have called Alldata and then have it copy the first two sheets to a new workbook named something else( FullSparameter_0) and then copy the name of the third and fourth sheet into the new FullSparameter_0 workbook and then copy column A-E from sheet dB Alldata.xls and paste it into the FullSparameter_0.xls workbook in the same dB sheet in the same spot. And do the same thing with the Phase Sheet. i know this sounds confusing, but im really new to the VBA stuff.
I just need 15 different files from the original Alldata.xls that will be named FullSparameter_0, FullSparameter_1, .., FullSparameter_14. but each file will have the same two first sheets, Setup Information and Cal Verification, and the same last two sheet names, dB and Phase, but then in the dB and phase sheets, it will copy over the next four columns of data. so in FullSparameter_0 it will have column A-E from sheet dB in Alldata.xls in the dB sheet in FullSparameter_0 (Same with the Phase Sheets). Then in FullSparameter_1 it will have column A and Columns F,G,H and I (for dB and Phase). In fullSparameter_2 it will have column A and then J,K,L and M. Each FullSparameter_X will have the exact same first two sheets and then the other columns for the last two sheets will be pasted into columns A-E in dB and Phase.
I've seen a few posts recently asking about sending either sending a range or a worksheet in an Outlook email as the body of the message through code. I've been looking at this and think I've come up with something that might work. I'd appreciate it if any of you XL kings and queens would take a look and see if the code works OK on your machine. I've sent a few messages to myself (sad I know ) and they seem to work well.
Here's the code. You need to set a reference to the Outlook object Library AND the Microsoft Scripting Runtime in order for this code to work.
Option Explicit
Sub SendRange()
'Sends a specified range in an Outlook message and retains Excel formatting
'Code written by Daniel Klann 2002
'References needed : 'Microsoft Outlook Object Library 'Microsoft Scripting Runtime...........
Sub SendEmail() 'References needed : 'Microsoft Outlook Object Library 'Microsoft Scripting Runtime Dim olApp As Outlook.Application, olMail As Outlook.MailItem Dim FSObj As Scripting.FileSystemObject, TStream As Scripting.TextStream Dim rngeSend As Range, strHTMLBody As String Dim Range1 As Range, Range2 As Range alertsSheet = ActiveWorkbook.Name Workbooks(alertsSheet).Activate Sheets("STATS").Select
Issue with this code is it is selecting wrong source range while generating email.
MsgBox Range1.Address is giving results as "$A$1:$B$1,$BX$1:$CA$1" and MsgBox Range2.Address is giving results as "$A$32:$B$38,$BX$32:$CA$38" but MsgBox rngeSend.Address is giving results as "$A$1:$B$38"
And the email generated as output is having only the data from range "$A$1:$B$38". Is there anything wrong with the way I am specifying the source range ??
I need that the code should replace strHTMLBody with the data in Range1 and Range2. I checked the tempsht.htm file and found that this file also have the same wrong data i.e. data from range "$A$1:$B$38"
Needless to specify that I am working with data having few hidden columns and need to consider only visible data.
I have a macro used to save a worksheet, its placed on the DATA sheet. is there a way so that when the user clicks this button each row 12:200 is checked for empty cells in that row (cells B:P). If a row is found the ref number in column A of each row is placed into next available row in Sheet3
For example : A12 = 12345 A13 = 6789 A14 = 9876 A15 = 54321
the DATA sheet is populated with various data in rows 12:15 it is found that B12, L12, E14,F14,P15 all have no data, so the values of A12,A14 and A15 are placed into next row in Sheet3
Result in sheet3
A2= 12345 (valuse of A12 in DATA Sheet) A3= 9876 (value of A14 in DATA Sheet) A4= 54321 (value of A15 in DATA sheet)
Finally a message box to state there is missing data, for example
"there is missing data from refs 12345 , 9876 , 54321" ie the list pasted into sheet
I've tried to remove connections after saves and have been unsuccessful.
HTML Code: ' Delete Additional Connections ' If ActiveWorkbook.Connections.Count > 0 Then ' For i = 1 To ActiveWorkbook.Connections.Count ' ActiveWorkbook.Connections.Item(1).Delete ' Next i ' Else ' MsgBox ActiveWorkbook.Connections.Count ' ' End If
HTML Code: ' Remove named ranges For Each nm In ActiveWorkbook.Names nm.Delete Next nm
I've tried both of these and the Excel file is still attached with XML to the query table. I get an error message saying the format is different then if you click okay it shows its connected to the database still. Is there an aggressive command that will severe all connections before saving? What commands to run to stop this connection after save to another workbook?
I have a spreadsheet that imports data, manipulates it then deletes 2 of the sheets then saves the file under a different name to the network. Is there any way to save this new worksheet without it storing the macros - so when the user open it, only the data is there and they get no prompt to enable macros?
is it possible to import just a portion of a csv file into my excel workbook? For example:
My csv file has data from 2010-2015. I want to somehow import only data between 2013-2015 from the csv file into my excel workbook every time I click refresh.
I cannot delete data from the source file because many other people are using the same file. Is there some sort of "SQL" for excel that makes it possible to trim csv file?
I have a workbook which, amongst several worksheets, also includes 12 blank worksheets (one for each month of the year).
Is it possible to have a macro that will (a) first prompt the user to select an excel file to import (the excel files to import are provided each month and only have one tab); then (b) select which worksheet to import the data (values only) from the selected file into.
To this point I have been able to successfully write code that will save a constant set of worksheets as a pdf. However, I would now like to alter it to be able to dynamically select the desired worksheets from a list box (I have been able to populate my list box) and then save as a pdf. The last step is where I am have issues. This is what I have thus far..
Dim relativePath As String Dim Selected As Long
For Selected = 0 To ListBox1.ListCount - 1 If ListBox1.Selected(Selected) = True Then Sheets("Summary").Range("Q65536").End(xlUp)(2, 1) = ListBox1.List(Selected) ListBox1.Selected(Selected) = False
I have numerous spreadsheets that I need to open and unhide a sheet, that has XML data stored in cell A1. What I need to do is copy that data in cell A1 and paste it into a text document and save that as an XML file saved as the XLS workbook name with a date stamp.
I'm running into many issues, the main issue is the saving as current file name, and the formatting of the text/XML file.
Here is my current code, which doesn't reference the current file name and is just very generic. Once I get the saving as file-name correct and the formatting of the xml file correct, I will work on it a bit more.
Code: Sub Test() Dim Rng As Range Dim wb As Workbook Set Rng = Range("A1:A2") Set wb = Workbooks.Add With wb Rng.Copy
I am setting up a "save as" macro that saves a file by replacing another file in a folder. Even though the macro has been recorded by approving the replacement (the prompt appears "the file --- already exists. Do you want to replace the existing file?"), when I run the macro, I am again prompted about replacing the file. Is it possible to avoid the prompt so the file is automatically saved by replacing the named file?
found the following code which works for 1 workbook at a time. I am trying to save 7 workbooks at 1 time. Is it possible?
Sub SaveAsCell() Dim strName As String
On Error Goto InvalidName strName = Sheet1. Range("V77") ActiveWorkbook.SaveAs strName
It will work on the first sheet but none after that. I need to have each workbook saved with the value in cell V77. Also if that is possible, is it possible to change where the file is saved as well?
Right now I have a master workbook that will open the 7 other workbooks, paste data onto several pages in each workbook. I would like the macro to save the workbooks. The workbooks are named: 02 Tuesday, 03 Wednesday, 04 Thursday, 05 Friday, 06 Saturday, 07 Sunday, 08 Monday.
I have a log that is used to keep when items are due. I do not want my coworkers to delete items once they have been entered and saved. So the excel sheet I am trying to make has certain cells in a range that I want to autolock after saving. For example: the cell range is G3:J402. I enter Customer Name in Cell G3 and the Date the job was received in H3. Once i enter that information I want it locked once i save it. Then later on, my coworker completes the job and enters the date in I2. And again once she saves this she shouldn't be able to edit this information. Then again another day she comes and enters the date on I3 when the product has been shipped out.
While all of the above activity is going on, new customers are continuously being in added in G4, G5....
Also, if possible the date in the H range should be the date items are entered in G (this would be a nice added feature). I've included the file for review. I'm running Microsoft Excel 2010
I have a log that is used to keep when items are due. I do not want my coworkers to delete items once they have been entered and saved. So the excel sheet I am trying to make has certain cells in a range that I want to autolock after saving. For example: the cell range is G3:J402. I enter Customer Name in Cell G3 and the Date the job was received in H3. Once i enter that information I want it locked once i save it. Then later on, my coworker completes the job and enters the date in I2. And again once she saves this she shouldn't be able to edit this information. Then again another day she comes and enters the date on I3 when the product has been shipped out.
While all of the above activity is going on, new customers are continuously being in added in G4, G5....
Also, if possible the date in the H range should be the date items are entered in G (this would be a nice added feature). I've included the file for review. I'm running Microsoft Excel 2010.
I have tried hard to find other solutions with links at the following places but not exactly what I'm desiring:Auto lock cells after data entry when file saved...
Auto lock cells after data entered and SAVED.
Auto Lock Selected Range of Cells After Saving
I should also mention that most solutions either provide for locking/unlocking of all cells but not a selected range. Or they provide for locking/unlocking of a selected range but not for a specific sheet or not after you have saved the workbook.
This is unique in that I'd like it to autolock after i press the save button for a SPECIFIC number of cells. I just wanted to clarify as to not make others think that I haven't used the search function.
I am trying to save my workbook in a specific directory with a specific filename and to incorporate a date field from within the spreadsheet. I have changed the format of the cell so it does not include / as i know this would not work. Saving it is the easy part but adding in the field from the spreadsheet is where im falling over.
I have an excel spreadsheet of 500 users which contains these details:
A1 = Email Address B1 = Mobile Number C1 = User Name D1 = Department E1 = Manager F1 = Handset
What i am after is something which will let me be able to use outlook to email each user their own details. So the "TO" filed in outlook to be A1 Email Address Subject to be - Company Mobile Phones Then in the body of the email to have the users details, so something like.
Mobile Number - 0123456789 User Name - Stewart Layzell Department - IT Manager - The Boss Handset - Iphone
How do I send data via VBA from a spreadsheet to a webpage that is already open? I don't want to open another IE window. I just want to be able to navigate the IE window that is already open on my desktop. Also, in reference to the open webpage, with this particular webpage (secure site), when you enter data on 1 screen, it takes you to another screen with a different url where you have to enter a bit more data and then move to a third screen with a different url and enter the rest of the data and then submit. Is there a way in VBA to have one macro handle passing data to all 3 screens and submit the information?
I have a spreadsheet file (excel 2003). I'd like convert it in CSV with delim.
But when I save it appear message that say "the file contains some things not compatible with CSV with delimiter" then I can save it and lose information. After when I open it with Word it looks ok but delimiter is ";"
I set delimiter in windows and inside excel too to ","
But I can't undertand what are things not compatible. there are only words and number as general format....(there aren't "," and each other strange character).
How can I modify this code to simply display the pdf and not have it save to anywhere.....
Sub SavePDF_Click() Dim UserSite As String UserSite = Sheets("Site").Range("D102").Value Sheets("View your Graphs").Select Sheets("View your Graphs").Activate
How do I save the spreadsheet with the current name of the spreadsheet in a macro?
Example: I want to save the spreadsheet to a network drive using the current name of the spreadsheet (it changes every other day). But I dont know to put the name in the SAVE statement. Here is what I have now:
I am trying to create a .csv file from an Excel file using VBA and when I use the ActiveWorkbook.SaveAs command, only the first row of text contains " quotes around the text. I have multiple rows that must contain the quotes. I have tried using """", and Chr(34), but then that puts """ (3 quotes) around my text. Is there a different function that I should be attempting to use? I am using concatanation to create a field where I would like the quoted text and am using the ActiveCell.Value command (ActiveCell.Text didn't seem to make any difference).
I have a code that performs a task for me and will save the file at the end. It currently saves as a name I have selected and today's date. The problem I now face is that I will be completing this task several times a day and it will not work as the file names will be the same. Is there any way to save a unique name each time?
I am trying to develop a routine that will save the file I am currently working on, then save the current tab as a *.csv file with the name equal to cell "C1" in the same directory as the original file. Then I would like it to close the .csv file and reopen the original file all while being generic with the naming so that if the file name and location changes, the script will still work. I recorded a macro to get me started.
