Saving Cell Contents To XML File Saved As Current Workbook File Name
Dec 12, 2012
I have numerous spreadsheets that I need to open and unhide a sheet, that has XML data stored in cell A1. What I need to do is copy that data in cell A1 and paste it into a text document and save that as an XML file saved as the XLS workbook name with a date stamp.
I'm running into many issues, the main issue is the saving as current file name, and the formatting of the text/XML file.
Here is my current code, which doesn't reference the current file name and is just very generic. Once I get the saving as file-name correct and the formatting of the xml file correct, I will work on it a bit more.
Code:
Sub Test()
Dim Rng As Range
Dim wb As Workbook
Set Rng = Range("A1:A2")
Set wb = Workbooks.Add
With wb
Rng.Copy
I am using excel 2010 on windows 8. I load a file which has been sent to me via e-mail and save it with an upgraded name, I then do a large amount of data input and save the file again, I do this regularly and even test load it at times to check it has saved, finally I save and close the file and then on reloading I discover the version I have is the first one I saved! all the work I have done on it has disappeared! I also sometimes find random .tmp files with non-sensical names in the folder to which I have saved, but I do not have the rights to open these .tmp files.
I have a worksheet that has a number in cell K5 - the number is generated on "file open" code and is custom formatted as "TN"0000. Thus 1 appears as TN0001, 2 as TN0002 and so on. I am trying to save a copy of the workbook based on the this cells contents i.e. TN0001.xls, TN0002.xls etc. but the files are saved as 1.xls or 2.xls. The code I am using is
When I open any saved Excel file the saved file opens along with a blank workbook titled "Book 1". How can I make it so when I open any saved Excel file it only opens the file I want and not a new workbook every time?
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
I've got a macro set up to copy a range of cells in one workbook, open another existing workbook, and then paste that range. So far so good.
However, I need the macro to also save a copy of that second workbook with a filename that is derived from the original workbook.
To be a bit clearer, let me give an example of how I'd like this to work. Let's say the original workbook is titled Pickle2014-03-14.Raw.xlsm, and I have a second workbook titled UploadFormat.xlsx. I want to run the macro in Pickle2014-03-14.Raw.xlsm, have the data pasted to UploadFormat.xlsx, then save UploadFormat.xlsx with the file name Pickle2014-03-14.Final.xlsx.
I have got a master workbook and I have written macro to copy and paste data on another workbook. write a macro to save the new workbook to a file path with a file name where both file name and path are stored in master workbook sheet...
I have a master workbook that contains macros and has an xlsm extension.
One macro in the workbook copies one of the worksheets to a new workbook. I then want to save this new workbook as an xlsx file. I use the following code line:
I have an add-in called GeoDesiX. It is a geocoder/mapping tool that uses Google Maps API. It works fine, even on my machine, but I think it was built using 32-bit, while I have 64-bit Excel. When I open the add-in for the first time, an example workbook is below, it works great.
The problem is, that when I save any file with the map in it, the VBA no longer works, and an error pops up in the below code that says: "Object Reference not set to an instance of an object". This happens at the Err.Raise 65000, "GeodesiX", Result part. It looks like it just cannot find the DLL file, which is the "GeodesiX" in that error part. I was reading that it might be caused by switching between 64 bit and 32 bit, but could not figure out how to do it. I am guessing you need to put Private Function Declare PtrSafe, but I could not figure out syntax on how to get that to work. I understand that you will not be able to use these as it is an add-in, but maybe you just know what I need to do in order for the vba to call to the DLL file.
I am setting up a "save as" macro that saves a file by replacing another file in a folder. Even though the macro has been recorded by approving the replacement (the prompt appears "the file --- already exists. Do you want to replace the existing file?"), when I run the macro, I am again prompted about replacing the file. Is it possible to avoid the prompt so the file is automatically saved by replacing the named file?
I was wondering if there is a way to write a macro that will take an excel file that I have called Alldata and then have it copy the first two sheets to a new workbook named something else( FullSparameter_0) and then copy the name of the third and fourth sheet into the new FullSparameter_0 workbook and then copy column A-E from sheet dB Alldata.xls and paste it into the FullSparameter_0.xls workbook in the same dB sheet in the same spot. And do the same thing with the Phase Sheet. i know this sounds confusing, but im really new to the VBA stuff.
I just need 15 different files from the original Alldata.xls that will be named FullSparameter_0, FullSparameter_1, .., FullSparameter_14. but each file will have the same two first sheets, Setup Information and Cal Verification, and the same last two sheet names, dB and Phase, but then in the dB and phase sheets, it will copy over the next four columns of data. so in FullSparameter_0 it will have column A-E from sheet dB in Alldata.xls in the dB sheet in FullSparameter_0 (Same with the Phase Sheets). Then in FullSparameter_1 it will have column A and Columns F,G,H and I (for dB and Phase). In fullSparameter_2 it will have column A and then J,K,L and M. Each FullSparameter_X will have the exact same first two sheets and then the other columns for the last two sheets will be pasted into columns A-E in dB and Phase.
found the following code which works for 1 workbook at a time. I am trying to save 7 workbooks at 1 time. Is it possible?
Sub SaveAsCell() Dim strName As String
On Error Goto InvalidName strName = Sheet1. Range("V77") ActiveWorkbook.SaveAs strName
It will work on the first sheet but none after that. I need to have each workbook saved with the value in cell V77. Also if that is possible, is it possible to change where the file is saved as well?
Right now I have a master workbook that will open the 7 other workbooks, paste data onto several pages in each workbook. I would like the macro to save the workbooks. The workbooks are named: 02 Tuesday, 03 Wednesday, 04 Thursday, 05 Friday, 06 Saturday, 07 Sunday, 08 Monday.
I recorded a macro to save a workbook to a specific folder using the current file name. However, I've tried to remove the absolute reference to a specific filename but it is not working for me. Am I close?
ActiveWorkbook.SaveAs Filename:= _ "H:Files and DocumentsPROJECTSSR 2 SS Phase Two Component ReliabilityWinTrac Files xt_conversionsexcel_version" & SheetName _ , FileFormat:=xlOpenXMLWorkbook, CreateBackup:=False
I want to create a standard macro that will copy values from a Master workbook to the current, active workbook I have open. The problem I have run into is when I record a macro it also records the name of the active workbook I'm copying data into and I would like it so when I bring up a workbook I just run the macro and it copies the values in. I'll be doing 8 different macros that each copy different values from the Master spreadsheet
I am trying to save my workbook in a specific directory with a specific filename and to incorporate a date field from within the spreadsheet. I have changed the format of the cell so it does not include / as i know this would not work. Saving it is the easy part but adding in the field from the spreadsheet is where im falling over.
How can I set the SAVE AS file name to equal A1's cell contents? (More specifically, when I need to rename an existing open file and place my cursor in A1 and hit Save As, I need to new file name to automatically populate A1's cell contents so I don't have to retype the contents of A1.)
I am trying to automatically reference the contents of another file into my main file. Basically I have one schedule that I've automatically generated in AutoCAD, and another formatted template. The AutoCAD schedule is completely unformated.
I want to include a link to the AutoCAD scheule (a *.CSV file) on my main spreadsheet and have the autoCAD schedule populate my template. I've done some reading, primarily on here, and I think I need to use either the INDIRECT() or the INDEX() function.
I can get INDIRECT() to work, but it's fairly repetitive (not overly important, but still.....). More importantly, though, the schedule file has to be open, which I would like to avoid if possible. INDEX(), I just can't figure out how to work!
I am trying to save this file but I'm having problems with "my Name" This information is in a workbook that is already opened called "Recaps" and the sheetname is "Data" and the value I am looking for is in "$C$5". I open another workbook called "Spare" and want to rename and save it to the code below.
End Sub This macro is the one I'm struggling with. I need to save a copy of the workbook I just opened (currently named MultiFuel Expense) in the same directory using the cell contents of G2 as it's name with _expense on the end.
Sub TestSave() ' ' TestSave Macro ' Macro recorded 08/11/2009 by Tracy ' ActiveWorkbook.SaveAs Filename:=ThisWorkbook.Path & "" & Range("G2") & "_expense" End Sub
I just found a code to copy file path and file contents. However it is copying folder path and folder contents.here is my requirement.I will specify a path, macro has to copy that file name in a particular cell, then it has to copy all its contents. ex:
file name 1 has 3 sub files in it, file name 2 has 2 sub files in it--
I'm actually using a macro that saves all the sheets from a workbook in new separate files, and save them in a specified folder.
Code: Sub Estrazione_Schede() Dim n As Long Dim myNome As String Dim myPath As String myPath = "D:path"
[Code] ......
What I'm trying to do is that, instead of saving all the sheets in one folder, the macro would save them in different folders, depending on specific values in a specific cell of each sheet. I tried to modify the macro like this, but it doesn't seem to work properly:
Code: Dim n As Long Dim myNome As String Dim myPathOne As String Dim myPathTwo As String myPathOne = "D:pathOne"
[Code] .....
With this code the macro ends up to check the condition only in the first sheet and then it copies all the sheet in the same folder.
