Screen Position

Aug 18, 2009

I would like to end a macro with a specific cell (e.g. E50) in the first cell in the upper left hand corner of the screen. How might I accomplish this?

View 3 Replies


Position A Message Box On The Screen

Nov 5, 2008

Is there a way I can position a message box on the screen? Is it possible to put in the coordinates?

MsgBox "Do you want to print this", vbYesNo

View 9 Replies View Related

Position Message Box On Screen

Mar 2, 2008

I have a Msg Box in my code. It usually pops-up in the Center of the screen. When I enabled a second monetor, the Msg Box now pops-up at the right edge of my main screen.

Is there a way to control where this Box pops-up? Ths code looks like this:

response = MsgBox("Switch to Manual Mode?", vbYesNoCancel, "Manual Switch")
If response = vbYes Then
WriteValue 0, "5MFWMODE.f_cv"

View 4 Replies View Related

Measure Cell Position From Right Of Screen

Jul 26, 2009

I once used a Function to Measure the distance of the lefthand side of the active cell to right of the screen.

But now I can find it anywhere.

can anybody remember the function Name?

View 8 Replies View Related

Code To Position Sheet On Screen

May 29, 2012

I'm using a bit of code (below) which is not amazing but which does seem to work, the idea being that entering a number then the active cell relating to that number will be highlighted and the sheeet position will "goto" it to move it into view on the screen. I have adapted this from something in one of my old Workbooks, and I admit it's probably a bit messy!

The problem is, it doesn't seem to always put the returned active cell in the same place, sometimes it's nicely central to the screen, but at others it's right at the top. As the numbers corrrespond to the top line of each little area of 30 rows, I'd like it to to come about 10-12 rows down. I can't seem to get this to work!

Sub FindSection()
Dim nm As Integer, txtnum As String, Found As Range
txtnum = Application.InputBox(prompt:="Enter a Number")
Set myRange = Worksheets("T&M SHEET").Range("K:K")


View 5 Replies View Related

Lock Shape Position On Screen

Feb 15, 2007

I created a shape (rectangle). I assigned a macro to it, to activate another worksheet.

Can I fix the position of the shape on the screen, near the top. I have 700 rows in the worksheet and I want this rectangle always visible, near the top.

View 4 Replies View Related

Show/Position A1 To Top Left Of Screen

Apr 23, 2008

I have a very large workbook with multiple sheets and use macros to copy and paste all data as values, then delete some rows and columns depending on certain criteria. This starts at cell A1 and works right, then down.

This is then saved as a copy and distributed to a wide audience.

The problem is that when each page is opened up, the data shown is the bottom right of the whole sheet instead of the top left ( Panes are frozen for row and column headers).

View 9 Replies View Related

Calculate Screen Pixel Position Of Cell AA1

Jul 7, 2014

I have an image overlapping a range of cells. I want this code to scan the pixel at the center of the cell, find out what color it is, and set the entire cell to that color, for each cell. Unfortunately with the GetPixel function I have to specify the x and y coordinates in terms of pixels from the top left corner of my monitor. The "CurrentCell.left &" method is not giving me the right location (Should start at cell AA1). If you would like, open up the file, go to sheet 2, insert an image, and click "Generate Field from Image". I set the cursor to follow the current position so you can see that it is selecting pixels from the corner of my monitor rather than cell AA1. Is there a way I can calculate the screen position of the top left of cell AA1?

Domino App.xlsm

[Code] .....

View 7 Replies View Related

Position Cell In Top Left Position

Jan 7, 2009

Is it possible to position a predetermined cell (e.g. A42) in the top left corner of the screen. (Not every screen users use has the same size)

View 3 Replies View Related

Application Onkey: Prevent Users From Using The Print Screen Or The Alt Print Screen Buttons On The Keyboard

Dec 29, 2009

I'm just looking to prevent users from using the print screen or the alt print screen buttons on the keyboard. I have this script that works if I use "39" (Right Arrow)but wont work if I use "42" (Print Screen Button).

View 5 Replies View Related

Position First Character

Mar 6, 2009

I have some cells with some spaces and then text where I want to find the position of the first letter. Do any of you know about any function I can use?

The example below contain 5 spaces and then my name. It should give me the answer 6.

" Magne"

View 8 Replies View Related

Position Of Last Two Numbers

Jun 7, 2009

Here is example... Explanation is in the title


View 3 Replies View Related

Fix Chart In Particular Position

Nov 16, 2011

I have a user who has created a spreadsheet and wants to fix the charts in a particular position.

When she places them in one position and saves the spreadsheet they appear to have moved the next time she opens the spreadsheet.

Is there any way to fix them in a certain position without having to protect the worksheet?

View 3 Replies View Related

Position Of The Before Last “/” In The Text

Oct 16, 2009

In cell A2 I have text with a lot of “/”, so I need formula that will return the position of the before last “/” in the cell. (Or the last if above isn’t possible).

View 9 Replies View Related

Specify Position Of New Sheet

Feb 23, 2007

I've written code that involves adding a number of new sheets to a workbook. I want to specify that each new sheet is positioned to the right hand side of all other sheets in the book, so that the sheets are positioned in the order (when reading from left to right) that they are added.

I know about the Copy After:= thing but I only know how to specify copying after a particular sheet name. I could solve my problem by each time referencing the sheetname from the previously-created sheet, but I think there must be a way to it properly.

View 3 Replies View Related

2003 Is Too Far Up On The Screen

Sep 27, 2009

I did the restart our company required and when Excel reopened it was on my laptop rather than the big screen. I run 2 screens. Excel 2003 is now so far up on the laptop screen, I cannot move it. I can barely see File, Edit, View, etc. How can I drag Excel down so I can resize it?

View 4 Replies View Related

Screen Size

Dec 7, 2009

what size monitor do you use?

I'm thinking about upgrading my 17" to a 23" monitor so I can see more cells without zooming

Anyone currently use a 23" for Excel?

View 14 Replies View Related

Can't Get Screen To Go All Way To Top Of Page

Nov 21, 2011

I cant get my screen to go all the way to the top of the page! & there is a 2 inch or so area at the bottom of the worksheet as well. I need to get my display back to normal!

View 4 Replies View Related

Print Screen

Jul 6, 2007

macro minimizes excel takes a print screen of the application behind excel then pastes it in a word document then maximizes excel screen again

View 9 Replies View Related

Splash Screen

Nov 22, 2008

I have never created a splash screen and would like to do so now, I am in the VB editor, i have inserted a userform, i would like to insert my company logo on to the userform, how do i do this?

View 9 Replies View Related

Screen Updating

Feb 13, 2009

Is there a way to disable updating to the screen but have a message displayed to the user while a macro is running? Something like a userform displayed on the screen or a message in the status bar. I vaguley remember you could "print" message to the status bar in LotusScript, wondering if there is something similar in Excel.

Application.ScreenUpdating = False
"the macro is running, hang tight"
...macro code in here...
Application.ScreenUpdating = True

View 9 Replies View Related

Screen Refresh

Nov 18, 2009

I have a large workbook with about 20 worksheets that I have used for several years without problems. Recently, I have been getting strange behavior when the screen refreshes. The biggest problem is that I get images of other worksheets covering my current worksheet when I change a cell. I can make them go away by scrolling or flipping between another worksheet and back. I have tried using manual recalc and this has helped somewhat but I can still get the images sometimes. The workbook contains VBA that performs various tasks on every worksheet (unlock, update pivots...) but these have been in there forever. There is also one piece of code that performs advanced filtering. I can only think there was something changed with a security patch, but I wanted to know if anyone else has had this issue and might be able to provide some advice on how to prevent it.

View 9 Replies View Related

Position Chart In Range

Jul 23, 2014

I have created a button in an excel worksheet that when clicked, creates new tabs each containing a chart. I have tried to modify the code to position the chart within a specific range of cells on each tab, however, I have not been able to get it to work. Below is my code. Please see the code following 'Add the Chart.

Sub AddCharts()
Dim lastr As Long, r As Long
Dim shname As String
Dim ltitles As Range, rng As Range, rData As Range, x As Range, tbl As Range, r2Data As Range

On Error Goto ErrorCatch:

Set ltitles = Sheet1.Range("A3:N3")
Set rng = Sheet1.Range("A4:A" & Sheet1.Range("A3").End(xlDown).Row)

[Code] ......

'Debug.Print Err.Number
'Debug.Print Error
If Err.Number = 1004 Then
shname = x.Value & x.Row + 1
End If
If Err.Number = 20 Then Exit Sub
End Sub

View 6 Replies View Related

Change Position Of Where Subtotals Are Placed?

Dec 31, 2013

Formula/code to change the position of where the subtotals are placed. I don't want them appearing at the beginning or end of the data set but in a separate column beside each data set. how to access the code so I can try and alter it myself.

View 14 Replies View Related

Find The Value In A Column To The Nth Position

Feb 17, 2009

A simple question:
I have a column of numbers, for example:

I would like to know the value that corresponds to (for ex.) 5th position from, of course, the beginning of the column, ie 8.

View 2 Replies View Related

Fix Position When Moving Between Sheets

Feb 26, 2009

I use a Workbook with several Sheets. I want to be able to quickly move to the same cell (whatever cell is currently in use) up and down the Sheets. Ideally I would also like the chosen cell to be centered on the page as well!!

View 2 Replies View Related

Position Of Last Number In Column

May 26, 2009

How to find position of lust number in column (non macro preferably).


For number 1 match will return 3 but I need 9 (and I can't sort column opposite)

View 4 Replies View Related

Determine Position/order Of Tab(s)

Feb 11, 2010

I'm am trying to find some way to determine if a particular tab falls before/after/between other tabs in a workbook. For example, if I have a tab "Top" and a tab "Bottom", I want to be able to determine if tab X is between them.

View 14 Replies View Related

Finding Position In The Array

May 15, 2014

I have an array that I want to go through several times. I want to try something like this:

[Code] ......

I cant just say "If Val < 7 Then" because it will spit out the string where "Val" is.

I know that I could create another variable like so:

[Code] .....

but this doesnt seem like an elegent solution...

View 1 Replies View Related

Position Of Third Comma In A Cell

Sep 25, 2008

How to know the position of third comma in the same cell.

View 14 Replies View Related

Copyrights 2005-15, All rights reserved