Search Along A Column And Scroll To It
Oct 10, 2008Is there a way using VBA, that I could type something in a cell, and then it would find it in the A column and scroll to it?
View 3 RepliesIs there a way using VBA, that I could type something in a cell, and then it would find it in the A column and scroll to it?
View 3 RepliesI have a document that is rather simple but has 32,984 Rows.
What I would like to do is program the sheet so if I enter a six (6) digit employee number in A2 (A1 is a header) then all the rows would scoll up and stop just below A2 in other words strop at row 3, if this makles any sense,
Also what I woudl like to do is the same option in A2 and have the same effect but here the user would have to enter only the first 3 characters of a name and then the system would scroll through all the options and start listing them as above starting at row 3.
The end result for both options would be to highlight the desired sorted rows..............
I have a spreadsheet form with a bunch of cells receiving and writing data via vba. On the form is a search box. The data is on the same sheet as the form to prevent flickering by activating another sheet. The problem is that I cannot select the search area and set the scrollarea or the "Find" quits after the first find:
if I have 2 jacks then it will find the first and not the second.
If I don't set the scrollarea of course it goes to the selected cell and moves the form out of the picture.
If I select a cell in the form area after the search, the "Find" is reset to the beginning and locates the same cell again.
Here is the code:
Code:
On Error GoTo DataNotFound
Cells.find(What:=txtFindText, After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _ , SearchFormat:=False).Activate
[Code]....
I have a rather large workbook with a lot of VBA behind it (about 1MB with no data, just formatting and VBA code). It all seems to work perfectly, except one sheet. It is a list of about 35 options with checkboxes beside each option. When the sheet is made visible through VBA code, the user has problems when scrolling the sheet.
It's hard to describe, but it all looks perfect until either the scroll-wheel or the scroll-bar is used to move around the sheet. The display then goes completely screwy. The heading row (which is actually a frozen pane anyway) ends up repeated all down the sheet, as do the column headers (A|B|C|D|E...). If i select another sheet and then back to this one, it's fine, it appears to be only when it is un-hidden through VBA.
I have attached two screenshots as an example... the only thing I have done between the un-scrolled one and the scrolled one is scroll the mouse wheel down and back up once.
Easy scroll to down ways, should I copy rows to a column? See the attachment for a more clearance.
View 4 Replies View RelatedI have a table with 500 rows. Is it possible to make so my header row which actually on row 9 of my excel chart stays visiable as I scroll deep into my rows. This is need due to the fact by the 50 row or so you can no longer see the column titles which makes it harder to fill out the data.
View 3 Replies View RelatedIs there a function/routine/etc. that when I scroll over a cell that I can display the name from the row along with the date from the column. (I know I can do it if I click the cell.)
Objective: Once I zero in on the desired cell I click it to schedule the person to work, count their hours, add to weekly and monthly totals, etc. etc. etc.
I am using the toolbox/ properties method to restrict the scroll area in the sheets of my workbook. However, for some sheets when i keep the right hand arrow pressed, the screen will not scroll to the last column. (i.e. the screen display will not move with the selected cell box)
View 2 Replies View RelatedMay seem straightforward, but not to me. I need some code to scroll down column A and insert the sum total of A2:A16 in B17, and repeat this everytime a blank cell appears in colum B, continuing down to the end of the worksheet.
View 5 Replies View RelatedIn the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?
View 2 Replies View RelatedI have never written or used a macro before and I have a simple macro task to complete:
I have Column L (L4:L10) of seven scroll bars that move according to number changes in column F (F4:F10). I want to create a form control command button that resets the changes on the scroll bars according to static column of numbers in Column E (E4:E10).
I don't know if it matters, but I'll add that I plan to add a second button that does the same thing with a different column of data. I assume I'll simply replicate whatever procedure I use in the first button - is this okay?
I have an array 20 Rows x 42 Columns, which contains a competition draw.
I need to search this array for a unique value and return whatever the time is in the first column on the same row as the value appears, and enter it into column C in the Womens Times sheet.
I also want to return into column D the court number from row 3.
The reason i want this automated is as teams enter / withdraw we may need to drag the games from court to court to fill gaps, so i want the Womens Times sheet to update accordingly.
I have been messing around with index and match, but cannot quite get it to return what i need.
I have attached an example ... on the sheet "Womens Times" in column A there is a list of game numbers ( #1W etc etc) indicating womens game #1 and so on. The main sheet i am using also has a seperate tab for the mens games, hence the designator of W or M on the end of the game number.
I am trying to get a formula that will search one column range “B” and pull data from another, “D”. Dates are down column “B” and some of those dates are repeated several times. In column “D” there is only one piece of data (a number) entered for each day. Eg, if 08/06/2009 has been entered 3 times in column “A”, there will only be data entered in 1 of the cells of column “D” and blank cells in the other 2.
Column B -- Column D
07/06/09 -- 54000
08/06/09
08/06/09 -- 62000
08/06/09
09/06/09 -- 61000
I couldn’t get the LOOKUP function to work properly, as there are duplicate dates in column “B” and I often got a result of 0 returned.
As I’ve only got 1 piece of data added in column “D” per day and any duplicate days would just have blank cells in “D”, I can actually get a SUMIF function to work, SUMIF(B3:B60,DATE(2009,6,8),D3:D60). Although it does work, it doesn’t feel right using it and I would prefer a formula that would return just the one cell, instead of the sum of a range of cells.
I have a file with duplicate names of test id's in col a. In col b I have single test id's and col c I have test names. I need to search col a for exact match of test id in col b and if it is there then put the name of test in col c into col d.
See attached document. Basically I need to know the name associated with the ID in column B.
I made a quick little spreadsheet that explains what I am trying to accomplish. Basically I need to search a column for a known number, when it is found, I need to look at another column on that row, and if the cell is a specific item , count it.
View 9 Replies View RelatedI like to search in a columns(1) for specific words say “Don” and then write in another column (say column 6) as “one”. Then it should keep doing until the last cell in that column. It should do nothing if "Don" is not found.
How can I do it?
how to find text from a row in column, where is a lot of text and return row number, of located text?
View 15 Replies View Relateduse the VLOOKUP function when the column I need to search is not column A?
I have a Workbook with two worksheets in it and in Sheet 1 I have 10 columns of various text and numbers. In cell A1 of sheet 2 I will fill with a certain code that appears in column E in Sheet 1. The result I would be looking for should come from Column A in Sheet 1. I thought that the following would work copied into B1 of Sheet 2 but it doesn't appear to - =VLOOKUP($A1,'Sheet 1'!E$1:$E$481,1,FALSE).
I need to come up with a way to search Sheet1 column-by-column and within each column search cell-by-cell. The value within each cell is a string and there are empty or blank cells between data (Ending the search after 100 rows is sufficient). As the macro iterates down each column and finds a cell that contains data, I need it to copy that data and paste it in a column on Sheet2. Basically, as the macro searches column A with space between data in Sheet1, it needs to copy that data to column A with no spaces in Sheet2. This needs to repeat for 20 columns.
View 9 Replies View RelatedI am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15")
.Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate
End With
how to make it search through columns then rows?
I have this formula:
=INDEX(Sheet1!D:D,MATCH("Kona",Sheet1!$C:$C,0))
Works great, however I need to tweek this somehow to search row "5" across dor "DEC" and when its found get the value 6 rows down which will be in row "11"
So basically I want to switch the columns in the formulas to rows
I want to have a search function on top of each column. Please find the attached.
Asearch box.xlsx
I have the below code used in my app, the problem I am having is that is searches the whole sheet, how do i limit the search range to just column A and B as all i need to search for is programs names and types.
View 14 Replies View RelatedThe end goal: to take the list of transactions provided by my bank and make a spreadsheet that adds up all the transactions for a different type.
I have already figured out that =IF(ISNUMBER(SEARCH("wal",B5)),C5,"") works REALLY well when searching for Walmart. I was originally using FIND instead of SEARCH but I found--through this site--that I should use SEARCH instead because FIND is case sensitive and SEARCH is not. considering I have found walmart listed 3 different ways: WALMART, Wal-Mart and WAL-MART. B is the "description" column I am searching and C is the amount column that I want to copy if it matches the search string.
I want to consider McD, Wendy's, BK and Chick-Fil-A all 1 category(column), instead of 5+ different categories.
How can i change the 'C' column with the name of the column. For example, the header name for 'C' column is 'Address'. How can i replace it?
Code:
yearidx = Year(.Cells(i, "C").value) - Application.Min(target.Rows(1))
monthidx = Month(.Cells(i, "C").value)
If Application.CountA(target.Rows(processrow)) > 1 Then
processrow = processrow + 1
target.Rows(processrow).Insert
End If
Is this possible using some excel formula? Need to search for every value under Col A in Col B and Col C and print the "Result" column as shown below:
Col ACol BCol CResultABEFound in Col CBDFFound in Col BCSMNot FoundDTNFound in Col BEUOFound in Col CFVAFound in Col CWX
I got two separate files which have column A, column B, how am i going to match the file A of column A & column B with the file B of column A & column B. I know something like match and index function but just cannot figure out this. Can somebody helps me. thanks
File A
Column A___Column B
aaaaa______44444
11111______33333
44444______ggkkkk
File B
Column A_Column B
44444_____uuuuuu
99999_____999
11111_____33333
I want to match from file A which column A & column B match with the file B of column A & B. In this case, my expected match will be 11111, 33333
How to put the match case in formulae.
I have 4 values in column A (Let's say A1:A4)
These values are also contained in column Q among/with many other values. I am looking for a script that will find these 4 values in column Q and delete them by shifting the cells up. I need something like:
Look A1, If the same value exist in Q column Then delete the same value cell in Q and shift cells up
Look A2, If the same value exist in Q column Then delete the same value cell in Q and shift cells up
Look A3, If the same value exist in Q column Then delete the same value cell in Q and shift cells up
Look A3, If the same value exist in Q column Then delete the same value cell in Q and shift cells up
I'm trying to simplify a macro so that I don't have to manually find the column to change each time. Basically, I want the macro to search for a column that contains [alt enter], and then add that column name to the existing macro below.
I tried various "find" or "match" comands in VBA, but am unsure how to execute the command so that the result of the find/match affects the highlighted line below.
VB:
Sub Seperatefromlinebreaks()
'working for active sheet
'copy to the end of sheets collection
ActiveSheet.Copy after:=Sheets(Sheets.Count)
Dim tmpArr As Variant
Dim Cell As Range
[Code]....
How to search two values in Two cell in one click. For example
My Input Values
Column A Column B
Apple Cake
Apple Juice
Apple Icecream
Mango Cake
Mango Juice
Mango Icecream