I like to search in a columns(1) for specific words say “Don” and then write in another column (say column 6) as “one”. Then it should keep doing until the last cell in that column. It should do nothing if "Don" is not found.
How can I do it?
I'm afraid I've run into some trouble with the Listbox function, which I really love, but I can't quite get past this hurdle.
I want to have a listbox which populates by checking an entire column for values, ignoring blank cells, and, if value is present, to also check to see if any value is present in the cell one column to the right and one row down from the cell that has the initial value. If both these conditions are true, to then display both values in the Listbox. In other words, the Listbox would contain two columns.
During this routine, when checking value is present in the second cell, I'm guessing that an IF statement would increment a variable signifying the cell reference by + 1 for column and + 1 for the one row down?
I need to make a list of items that occur above the string "Room" and the data offset to the bottom and bottom right.
Here is the sample data:
1, 100A
2, Room, Rh
3, 123, 11
3, 200B
4, Room, Rh
5, 456, 24
6, 300C
7, Room, Rh
8, 789, 56
...
On another sheet this is what the output should look like:
1 100A 123 11
2 200B 456 24
3 300C 789 56
...
Here is a copied function that I've been trying to work with. "ROOM_AREAS" is the range in column A. I just can't seem to figure out how the ROW and SMALL functions are supposed to work here.
I have the following VBA code that will copy data from one workbook to another.
Sub copytoanotherworkbook()
Dim smallrng As Range
Dim destrange As Range
Dim destWB As Workbook
Dim Lr As Long
Application. ScreenUpdating = False
If bIsBookOpen("P&WM Estimate Tracking Sheet.xls") Then
Set destWB = Workbooks("P&WM Estimate Tracking Sheet.xls")
Else
Set destWB = Workbooks.Open("N:Estimate SheetP&WM Estimate Tracking Sheet.xls")
End If
Lr = LastRow(destWB.Worksheets("Tracking Sheet")) + 1
Set sourceRange = ThisWorkbook.Worksheets("Links").Range("A1:L1")
Set destrange = destWB.Worksheets("Tracking Sheet").Range("A" & Lr)
sourceRange.Copy
destrange.PasteSpecial xlPasteValues, , False, False
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
The problem I am having is that when it copies the data to the last line of the destination workbook, I have a formula in column I of the destination workbook that calculates days remaining. How would I go about creating an autofill to fill the formula to only the last row of data? I've read some posts on this, but I don't think they deal with what I need.
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
I am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies View RelatedI have an array 20 Rows x 42 Columns, which contains a competition draw.
I need to search this array for a unique value and return whatever the time is in the first column on the same row as the value appears, and enter it into column C in the Womens Times sheet.
I also want to return into column D the court number from row 3.
The reason i want this automated is as teams enter / withdraw we may need to drag the games from court to court to fill gaps, so i want the Womens Times sheet to update accordingly.
I have been messing around with index and match, but cannot quite get it to return what i need.
I have attached an example ... on the sheet "Womens Times" in column A there is a list of game numbers ( #1W etc etc) indicating womens game #1 and so on. The main sheet i am using also has a seperate tab for the mens games, hence the designator of W or M on the end of the game number.
I am trying to get a formula that will search one column range “B” and pull data from another, “D”. Dates are down column “B” and some of those dates are repeated several times. In column “D” there is only one piece of data (a number) entered for each day. Eg, if 08/06/2009 has been entered 3 times in column “A”, there will only be data entered in 1 of the cells of column “D” and blank cells in the other 2.
Column B -- Column D
07/06/09 -- 54000
08/06/09
08/06/09 -- 62000
08/06/09
09/06/09 -- 61000
I couldn’t get the LOOKUP function to work properly, as there are duplicate dates in column “B” and I often got a result of 0 returned.
As I’ve only got 1 piece of data added in column “D” per day and any duplicate days would just have blank cells in “D”, I can actually get a SUMIF function to work, SUMIF(B3:B60,DATE(2009,6,8),D3:D60). Although it does work, it doesn’t feel right using it and I would prefer a formula that would return just the one cell, instead of the sum of a range of cells.
I have a file with duplicate names of test id's in col a. In col b I have single test id's and col c I have test names. I need to search col a for exact match of test id in col b and if it is there then put the name of test in col c into col d.
See attached document. Basically I need to know the name associated with the ID in column B.
I made a quick little spreadsheet that explains what I am trying to accomplish. Basically I need to search a column for a known number, when it is found, I need to look at another column on that row, and if the cell is a specific item , count it.
View 9 Replies View Relatedhow to find text from a row in column, where is a lot of text and return row number, of located text?
View 15 Replies View Relateduse the VLOOKUP function when the column I need to search is not column A?
I have a Workbook with two worksheets in it and in Sheet 1 I have 10 columns of various text and numbers. In cell A1 of sheet 2 I will fill with a certain code that appears in column E in Sheet 1. The result I would be looking for should come from Column A in Sheet 1. I thought that the following would work copied into B1 of Sheet 2 but it doesn't appear to - =VLOOKUP($A1,'Sheet 1'!E$1:$E$481,1,FALSE).
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
View 5 Replies View RelatedI need to come up with a way to search Sheet1 column-by-column and within each column search cell-by-cell. The value within each cell is a string and there are empty or blank cells between data (Ending the search after 100 rows is sufficient). As the macro iterates down each column and finds a cell that contains data, I need it to copy that data and paste it in a column on Sheet2. Basically, as the macro searches column A with space between data in Sheet1, it needs to copy that data to column A with no spaces in Sheet2. This needs to repeat for 20 columns.
View 9 Replies View RelatedI am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15")
.Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate
End With
how to make it search through columns then rows?
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
If I have a table as noted below with the following assumptions:
- this table will likely grow
- the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted.
- Macros aren't an option as this sheet needs to be macro free.
A
B
C
1
Item
Calories
Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
a macro to convert this;
a
b
c
d
[Code]...
Into this;
x
a
9
x
b
[Code]...
So far I have the following, but this is not quite right!
[QUOTE][Sub ConvertRange()
Dim targetRowNumber As Long
targetRowNumber = Selection.Rows(Selection.Rows.Count).Row + 2
Dim col1 As Variant
[Code]...
/QUOTE]#
If you open the attached file you'll notice that once clients are entered into the name field of the master worksheet that a new worksheet is created with their name based off a master template. What I need now is a way to create a "on-demand" "click" macro that will allow the user to select a month (Jan-Dec) based on my master tab and autocreate a summary worksheet named that month with each client listed on the Team Roster worksheet in the next available column of the worksheet that was just created.
macro generate a prompt to list the months to allow updates frequently.. so if the same month was run twice it would overwrite the previous.. the woman we're doing this for isn't very excel literate...
NOTE: As you enter names on the Team Roaster sheet it will autocreate tabs.. test file has MrExcel as the worksheet, if deleted the sheet will delete automatically.
I need the searchable list box to return data one column to the right of the "searched" column data.
This works mostly with Data Validation.
Named range "validationlist" with "=OFFSET(Choice!$AC$4,,,COUNTIF(Choice!$AC$4:$AC$14,"?*"))"
D9 has a drop down control. Enter the cell and type "br" and click the drop down arrow. Mouse to choose an item from the list box. If you chose "brown" , it will be entered in the cell. The returned item should be "banana" from the other column. How to do this?
Once working the control needs to be used across the row in more cells: E9, F9... all the way out to W9. And there has will be a Lookup to pull data from elsewhere above D9.
This worksheet ultimately needs to be uploaded to Skydrive and used as a collaborative worksheet as a 'web app'.
See attachment and formula output below.
[Code]............
searchableListBox-EF1.xlsx‎
I am trying to create a macro that converts a large list of Customer details from a vertical to horizontal format.
Each Customer has a unique sequential number running from 1 but the details are not always the same (e.g. in the below Phone does not always appear).
Current format is per the below:
Before
Column A Column B
Customer1
Address ABC
Phone 1234
Customer2
Amount 25
Address XYZ
Customer3
Amount 500
Address PQRS
Phone 567
Format afterwards should be
Customer AmountAddress 1Phone
1 ABC 1234
2 25 XYZ
3 500PQRS 567
I have a list of IPs that have attacked a certain site over the past year. There are 3000 different IPs, so I would like to automate this. Is there a way to code a lookup on an IP to match its country of origin? ....
View 6 Replies View RelatedI have two columns of data and what I would like to do is have excel look over one column ( I5-I379) and for each cell that has say 30 in it I want it to return the value from a corresponding column (G5-G379), to form a separate column.......is this possible?
View 9 Replies View RelatedI want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
I know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
search column "E" for a specific text value (let's say "it"). When found, copy the value in column "A" for the corresponding row where "it" was found to another cell "F2". When copying to cell "F2", if a value already exists in cell "F2", then no nothing else copy the value. If no "it" was found in the column, do nothing. I will continue to search, but since I am new to VBA it takes me a bit to find what I specifically need.
View 1 Replies View RelatedI am trying to work out how to nest offset in a code using search replace. The goal is to find a value from cell A1 (example) and replace the values in the cells next to the cell containing samuel and the cell containing samuel.
A sort of search and remove data tool if you like So for example:
[QUOTE]A1: "samuel" (the search criteria)
Search range is: B1:D400
(for example)
Cell B40 = samuel
C40 = Driver
D40 = year
So, the macro is activated and finds "samuel" in B40 and I would like C40 & D40 replaced with "" The code I'm using is below: (this is just replacing the cell containing the search criteria with "test". I would like to nest offset(0,2) & offset(0,3).Value = ""
Sub Macro1()
Range("B1:D400").Select
Selection.Replace What:=Sheets("Sheet1").Range("A1").Value, Replacement:="test", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
I have this formula:
=INDEX(Sheet1!D:D,MATCH("Kona",Sheet1!$C:$C,0))
Works great, however I need to tweek this somehow to search row "5" across dor "DEC" and when its found get the value 6 rows down which will be in row "11"
So basically I want to switch the columns in the formulas to rows
I want to have a search function on top of each column. Please find the attached.
Asearch box.xlsx
I have the below code used in my app, the problem I am having is that is searches the whole sheet, how do i limit the search range to just column A and B as all i need to search for is programs names and types.
View 14 Replies View Related