I would like to do is search for a piece of data within a different specific row, and return true or false if it is there. In the attachment cells D15 and D16 would be true if the ID is in the correct row, and false if it is not.
View 3 Replies
I have a variable that can contain in no predefined order, a number of letters and one two digit number (code). I would like to extract this two digit number from this variable and based on its the value perform a task. I can test for the specific value of this number as there are only about 10 of these 2 digit codes. Im quite happy to have the routine test for the number by comparing them all one by one as there are only 10 it wount take too long.
The best scenario would be to extract the value into another variable which I then could use to construct a "select case" table from which I could then initiate the required task based on that number.
I have an excel spreadsheet that I am trying to format. Each time the spreadsheet is of the same format but with differing amount of numbers. I.e. sometimes it will be a set of 3, the next time might be 6.
I want to write a macro that will find a set piece of text, move it offset(-1,2) and then find the next one.
For example....
I have a monthly report. Worksheets for each month, each row is a type of fruit (column A), and the number sold (column B). A new worksheet is added each month with the information. I also have a Summary worksheet - running total of all months: Type of Fruit (column A), Number sold (column B), and Total of all fruits - number sold. I would like a formula for the Summary worksheet - to match that fruit (column A) to any of the other worksheets - matching the fruit (column A), and bring back the number sold (column B). (note some apples are Fuji and some are Honey crisp - those would be totaled together)
ex:
Tab = Jan 14
Fuji apples3
Bananas2
grapes9
TOTAL14
[Code]....
I am after tips on creating a macro in Excel 2010 where it will search a list of folder paths in a column on a spreadsheet and insert a jpeg within the sheet from that folder if it exists. If more than one jpeg exists i would like it to insert the first jpeg only. i have found tips where it will insert images if you know the filename, however I don't have this luxury as file naming routines vary from folder to folder the only constant is that the file is a .jpg format.
View 1 Replies View RelatedHow to assign a variable of type Long to the below code.
1) Dim searchField as LOng
ActiveSheet.Range("N2").FormulaArray = "=MAX(IF($A$2:$A$200=""" & searchField & """,$C$2:C$200))"
2) ActiveSheet.Range("N2").FormulaArray = "=MAX(IF($A$2:$A$200= searchField,$C$2:C$200))"
1) code failed because I want the variable searchField to have a data type of LONG.
2) code failed because it seems like excel thought the search criteria is of same searchField.
How to convert date to general format and store it in a variable of data type Long. I.E if I convert 3/15/2008(data type of Date) to data type of General, it should be 39522. What is the VBA code for doing this conversion?
I have an excel file with a large amount of employee data in it and want to create a search facility that will run on variable search functions and display the information on the screen
I want to be able to enter variable search functions as follows:
Employee Number; shows all information on employee
Division: shows all employees in division (possible from a list of all divisions)
Appraisal Eligibility : Applicable shows all the applicable employees
Job Role: shows all the employees with the same job role (possibly from a drop-list of all roles)
I know its easier in Access, but all records in Excel as a legacy and don't have time to create an access database currently.
I am doing a Regular Expression search on a string variable assigned to the HTML content of a Wikipedia search. However I am currently manually going to Wikipedia, searching for the term, saving the html page, opening the saved page with Notepad and then copying the content into a cell.
Can the above process be automated with VBA, how to assign the html content of a Wikipedia search to a string variable.
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test()
Dim StartRng As Range
Dim Buffer As Range
Set StartRng = WorkSheets("Sheet1"),Cells(1,1)
StartRng.Activate
ActiveCell. CurrentRegion.Select
Buffer = rngStart.CurrentRegion.Copy
' I also tried the following line of code but that didn't work either
'Set Buffer = rngStart.CurrentRegion.Copy
..
...
End Sub
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
I have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:
1. The rows containing the matched search criteria in the first sheet are highlighted.
2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.
I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.
Using the search macro code below, could someone please help to add in more codes what I'm currently using, and also where to insert it. The Search function works well for what I need and it helps me to locate data. When using the search function somehow it search all sheets within the workbook but I only want it to search an array of sheets when using this macro that is needed to complete the task for what I'm after.
Macro
Public Sub FindText()
'Run from standard module, like: Module1.
Dim ws As Worksheet, Found As Range, rngNm As String
Dim myText As String, FirstAddress As String, thisLoc As String
Dim AddressStr As String, foundNum As Integer
myText = InputBox("Enter the text that you want to search for:", "Start Search!")
If myText = "" Then Exit Sub...................
I'm from Bavaria, Germany. Right now, I am doing an internship for my studies. my problem: I need a search procedure which shows an Input Box where you can enter a word to search for. It should work like the original Excel search (Ctrl-F), but with a simpler design, like with my own Text "Enter your Query" and a Button "Submit Query" / "Quit search". Is there the possibility to Highlight the Search Target? The problem hereby is that this highlighting should not be permanent. That means the user sees the target for which he searched for, the cell highlighted in a different color, etc. But as soon as the user clicks onto another cell, etc., the highlighting vanishes. If there is no fitting match, there should be a MessageBox like "Sorry the Target xyz cannot be found"
View 9 Replies View RelatedOn the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedI'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
What i have so far is:
-3 Sheets (Sheet1 - Search, Sheet2 - Data, Sheet3 - Result)
-Sheet1 has a userform ready to link up - this opens up when workbook and worksheet is activated.
-Sheet2 has some example data to search - the search is for column 1 (see attachment)
-Sheet3 has a template ready for the data to be pasted to.
I would like the search result is column 1 to copy the data from columns 1 to 7 to sheet3.
I want the template/layout to remain after the pasting of results. (everything protected from editing, if possible).
Once finished (ie go back to sheet1, i want the data from sheet3 to be cleared.)
I' having trouble using the =IF(ISNUMBER(SEARCH formula to search multiple cells.
I can get it to work to search one cell (as below):
=IF(ISNUMBER(SEARCH("Same",G10)),"No Change",'Aug 09 Matrix'!F10)
(In this case the respone is No Change as Cell G10 contains "Same")
However cannot get it to work for several cells. I have pasted below and highlighted the function I would like it to perform:
=IF(ISNUMBER(SEARCH("Same",G10:R10)),"No Change",'Aug 09 Matrix'!F10)
Essentially the other cells in that row (G10:R10) all contain "Same", however for some reason it is identifying this as FALSE and putting in the data from the 'Aug 09 Matrix' sheet.
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
View 3 Replies View RelatedI Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code:
Sub dataintoonesheet()
Dim i As Integer
Dim jk As Integer
Dim j As Integer
Dim rowstart As Integer
rowstart = 3
[Code] .......
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing
With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With
'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar
'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1
End Sub
I need my program to:
- find the cell containing the string "Datum/Tid"
- record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range
Dim lRow As Long
Dim lCol As Long
'Find method of VBA
Set rFoundCell = Range("A1")
Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
lRow = rFoundCell.Row
lCol = rFoundCell.Column
End Sub
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim startDate As String
Dim stopDate As String
Dim startRow As Integer
Dim stopRow As Integer
startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)")
If startDate = "" Then End
stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)")
If stopDate = "" Then End
startDate = Format(startDate, "dd/mm/yyyy")
stopDate = Format(stopDate, "dd/mm/yyyy")
startRow = Worksheets("sheet1").Columns("A").Find(startDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select
End Sub
I am getting error in Set MyRange
[Code] .....
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
View 14 Replies View RelatedI attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.
View 7 Replies View RelatedI am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have
shCalculator.Range("C115:C314").Select
Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Select
x = ActiveCell.Row
shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value
shCalculator.Range("Package").Value = Cells(x, 12).Value
shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value
shCalculator.Range("Term").Value = Cells(x, 62).Value
shCalculator.Range("Discount").Value = Cells(x, 67).Value
shCalculator.Range("Equipment").Value = Cells(x, 72).Value
I want the select case list of a ComboBox to be treated as a variable in order to shorten the code size. To clarify the problem, i post the code with what i want to do, but don't know how to do it that way.
Code:
Select Case ComboBox1.ListIndex
Case 0: y = "AT"
For j = 0 To 26
Case "j": y = sheets("name").Range("A(j)") 'Range A(j) is a string, so y as well, as seen in Case 0.
Next j
End Select
Is something like this possible?
I have two macros that run fine separately. I want to join them, but when I do I get an Object variable or With block variable not set error.
Here's the code
Code:
Sub border_highlight_insert()
' Change heavy border to new column, change tint - keyed to year A6
With ActiveSheet
Dim i As Integer
[Code]....
This works fine in Excel 07 but when ran in 03 it doesn't work and I get that error message.
Sub mcrRefresh2()
Sheets("WeeklyData").Range("A1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Sheets("WeeklyData").Range("aa1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Worksheets("WeeklyPivot").PivotTables("PivotTable1").PivotCache.Refresh
End Sub
