I have a couple spreadsheet Excel 2003 that I have to Email, I use a few macros with these spreadsheets. The Macros are kept in my personal workbook. When I Email these sheets does the end user see the warning enable macros or do they just see the sheet as is. I am mailing the whole workbook but macros are in my personal workbook. If they see the warning is it possible for me to Email so they will not have to contend with that?
View 3 Replies
I am utilizing the following code to force the user of my database to enable macros. This is the
View 4 Replies View RelatedI have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.
I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.
No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?
How can I write a "warning" in the form of a message box that will appear if the user does not enable macros?
Also, can I have one of the buttons on this message box turn on macros?
I was playing around with Macros on an excel file. I created a few and ran them. In the end, I didn't like the way they ran, so I deleted them all. However since I ran them in the excel file, every time I open the file it gives me a warning saying
"Macros have been disabled."
Is there any way to remove the possible Macros ties/links from my file? I know I can disable the warning, but if I just want to remove the Macros ties to my file.
Everytime I open the excel file I am working on I get a message saying that the file contains macros.
I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.
I would like the security warning not to pop up when the workbook is opened. I have been able to turn it off for myself but I had someone else test it and each time it's opened the security warning pops up with the disable, enable messages. Is there a way to turn this off permanently so not matter who opens it it won't pop up?
View 9 Replies View RelatedI have several workbooks that use macros from my personal macro library (MyExcelAddIns.xlam).
Some of these, especially new ones, get an error message every time I save them: "Privacy warning: This document contains macros, ActiveX controls, ... These may contain information that cannot be removed by the Document Inspector."
Then after I save it once or twice, the message goes away. Why am I getting this message? Why only sometimes? What can I do to get rid of it entirely?
I'm making a little calculator thing for some of my colleagues, and I've created a warning sheet at the front in case their macro security is set to high or they disable macros.
The thing is, when the workbook is opened with macros enabled, and when it's closed, this warning sheet flashes briefly. Is there any way to avoid this?
My code is:
Private Sub Workbook_Open()
Worksheets("Form").Visible = True
Worksheets("Form").Activate
Worksheets("Enable macros").Visible = False
UserForm1.Show
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.ScreenUpdating = False
Worksheets("Enable Macros").Visible = True
Worksheets("Form").Visible = False
Me.Save
Application.ScreenUpdating = True
End Sub
Is there any code that will automatically enable macros on Auto_Open?
View 6 Replies View RelatedOn several of my worksheets, I'm asked if I want to disable/enable the macros but there are none associated with that particular worksheet- matter of fact, none of my worksheets have macros unless pivot tables count, so why am I being prompted in that way?
View 9 Replies View RelatedI am trying to use the EnableMacros. zip script located here {url} But I am having a hard time making it work!
1. I have copied the module in EnableMacros.zip and imported it into my workbook.
2. I have placed identical code in my workbook's ThisWorkbook as is in the EnableMacros.zip's ThisWorkbook.
3. I have copied Sheet1 from EnableMacros.zip titled "Info Sheet". In MY workbook it is sheet7, but it is titled the "Info Sheet" in the EnableMacros.zip.
4. I have also copied sheet6 from EnableMacros.zip into my workbook and titled it "LoadScreen". In EnableMacros.zip the sheet is titled "Sheet1"
...
I'm using Excel 2003 and recently when I open a file, it prompts out a Security Warning message about Marcros which at the end contains 3 choices: Disable Macros, Enable Macros, and More Info. I then click Enable Macros to open the file. Once open, I go to Tools > Marco > Run Marco (Alt+F8). A Macro box prompt out but the Macro list is empty. I try different choice inside the pull down menu "Macros in" but the Macro list is still empty.
Where can I find out the macro which triggers the warning message of Security Warning when opening the file? And how can I delete the macro if found useless.
Whenever I open an Excel file that has macros in it, a message always pop up and ask if I want to enable or disable the macros.
Is there a way to get rid of the message?
1) Force user to enable macros.
2) keep three worksheets very hidden all the time.
3) passwrd protect vba
I have been using this code to force user to enable macros but this unhides all sheets other than "macros not enabled" sheet. I need three worksheets to remain very hidden all the time. How do I do this.
Option Explicit
Dim ws As Worksheet
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Worksheets("Macros Not Enabled").Visible = True
For Each ws In Worksheets
If ws.Name "Macros Not Enabled" Then ws.Visible = xlVeryHidden
Next
End Sub
Private Sub Workbook_Open()
For Each ws In Worksheets
If ws.Name "Macros Not Enabled" Then ws.Visible = True
Next
Worksheets("Macros Not Enabled").Visible = xlVeryHidden
End Sub
I have been looking at Dave's Script found in this post Determining if macros are enabled It works just like i want it too. But when I try and use it in my workbook with differnt sheet names it doesnt work. I have even tryed to rename the sheets in the example file and it stops working. My sheets are as follows:
Sheet1 (JI)
Sheet2 (GC)
Sheet3 (ET)
Sheet4 (SV)
Sheet5 (JB)
Sheet6 (P)
Sheet8 (Info Sheet) <----This is where the Notice to turn on Marcos is
Sheet9 (D)
I have the following code in Module2
Public bIsClosing As Boolean
Dim wsSheet As Worksheet
Sub HideAll()
Application. ScreenUpdating = False
For Each wsSheet In ThisWorkbook.Worksheets
If wsSheet.CodeName = "Sheet8" Then
wsSheet.Visible = xlSheetVisible
Else
wsSheet.Visible = xlSheetVeryHidden
End If
Next wsSheet
Application.ScreenUpdating = True...................
I am attempting to have a pop message display when users of a certain form "X" out of the form. Below is what I came up with but it does not seem to be working:
Code:
Private Sub IntroUpdate_BeforeClose(Cancel As Boolean)
Call MsgBox("User closed the program before any formulas were updated.", vbExclamation, ".: ALERT: FM Program Tabs :.")
End Sub
Currently the above is in the code section of the form (titled: IntroUpdate).
Also if the form unloads I do not want the message displayed - only in the event that a user "X" out of the specific form titled: IntroUpdate).
the system i'm creating involves many user ... some may know how to decode the system esp. on the startup ... if they click disable macro they can view, edit and delete important data in the system ... can somebody guide me on how to automatically enables macro on excel file on startup???
I've tried:
- setting security to low - but got auto reset by administrator.
I have a spreadsheet with 2 combo boxes - Combobox 1 enables a user to specify if they want to look at the data on the sheet by week or month - it has just 2 options - "select by week" or "select by month"
The list in combobox 2 changes based on the selection in combobox1 - so if you select "select by week" , a date list by week shows up.
Combobox 2 is supposed to run a macro which updates some backend pivot tables. there are 2 types of backend pivottable - weekly tables and monthly tables.
What i am not sure about is how to get the selections in combobox 2 to run either the weekly macro or the monthly macro based on if combobox1 is set to week or month ...?
So I have a Workbook that I want to make read-only/protect after a certain date. I also want to force the user to have macros enabled. So far I have the following script, but despite changing it to read-only it doesn't seem to do anything. I have also tried to enable protection on the sheets after that date, but am getting errors.
View 2 Replies View RelatedWhen I delete a worksheet, via code, a warning pops up telling the user that a data is subject to deletion.
View 9 Replies View RelatedI have Excel file that is linked to Access Database. Everytime the user opens the file, there is pop up message that warns the user we there to enable the macro or to disable it. I want to force the user to enable the macro or even better if I can make disappear this warning and automatically enable the macro. See attached for more details.
View 3 Replies View RelatedWhat is the code to enable macros upon opening a workbook and avoid receiving the message "Security Warning-Macros have been disabled" in Excel 2007?
View 3 Replies View RelatedI have been using Erik's fantastic "Force Enable Macros" code (exactly as it appears)...
force enable macros & ASK to save changes (SOLUTION)
...with the desired results (and comfort) under Excel 2003.
The code works under Excel 2007. However, if there is another workbook open at the sametime (regardless of whether Workbook two has macros or not), I get an Excel "crash";
Code:
Microsoft Office Excel has encountered a problem and needs to close.
[ ] Recover my work and restart Microsoft Excel There is also a Event ID 7001 in the Event Viewer. I have run Excel diagnostics and there are no issues.
In reference to my other topci here: Userform Error
In this workbook I have successfully made it act like a userform calculator, the user does not ever see the actual sheets in the workbook, their only interface is the Userform calculator I created.
This is exactly how I want it, they do not need to see the sheets, nor do I want them to.
This leads me only to my next problem... Some of the users obviously wont have Macros automatically enabled, what I am wondering is, is there a way to put the normal "Enable Macros" button which appears along the top of a macro containing workbook when opened, I want to put this button into a userform like display without showing the workbook at all.
So here the process I envision:
1. User double clicks the file
2. It opens and automatically goes invisable (like it does already)
3. If the user does not have macro enabled, a userform like box appears and says "Please enable Marcros to user" with a button below for "Enable" and "Exit"
4. If exit is pressed excel closes
5. If enabled is pressed Macros are enabled and then they will automatically see my calculator userform like normal.
As you see, at no point do I want them to see excel or a workbook, just userforms so its not like they are using excel at all.
I have searched around the net and found a few ideas to tackle this, mainly one that has a "Prompt" workbook that shows when macros are disabled, but that is not ideal for me. However perhaps I could just edit this "prompt" code thing for my situation?
Here is the prompt sheet code I talked about:
Code:
Option Explicit
Private Sub Workbook_Open()
With Application
[Code]....
How to use:
Open an Excel workbook Select Tools/Macro/Visual Basic Editor in the VBE window, select View/Project ExplorerSelect the This Workbook module Copy and paste the code above into this ModuleNow select File/Close and Return To Microsoft Excel Don't forget to save your changes...
8. Name one of your sheets "Prompt"
I have a cell (B1) in the second Sheet. It contains two sentences of text, which will be spoken when entering that Sheet (by a click in the previous Sheet).
Code:
Sub ButStart_Click()
Sheets(2).Select
Range("B1").Speak
End Sub
When the Speak command is running no other user interaction can be made. As the text is quite long not all the users want to wait until it is finished. So I need the users to be able to click on the "Next" button which takes them to the next Sheet (and start speaking the text there).
I need a macro that simply allows me to open the filter criteria dialog to "contains," then stops, so I can enter the value to be filtered. Macro recorder does not allow me to stop recording at the point the "contains" dialog appears.
View 3 Replies View RelatedI am trying to put together a macro that waits for the user to input data and then continue running the macro.
All user input is for one cell and I am looking at more of an entire sheet worth of data.
Here is the scenerio.
I have one tab that pulls data out of a sharepoint list. I then have another tab that I dump data from another database into and then use vlookups to compare the data.
The problem is I need it update the sharepoint list. Then wait for the user to dump in the new data from the external database before continuing the macro and working with the vlookups.
Currently I am working this by running a few different macros to do it all, but I would like to condense it down to running one macro.
Is it essential to enable macros in whatever the pc i use, if i am interested in using a form which i created in a different pc with macros. is there a way to avoid this. because each and every time i dont want to change the settings in excel in other pc. the form which i create will be filled by my colleagues and they have to send it back to me.
View 2 Replies View RelatedI have created a workbook ( with protected sheets) containing two macros " To Insert a Row ( Copying the formula from the row above) and "Delete a Row", both, assigned to a customized toolbar.
when I move the workbook, say from the folder where I created it originally to the desktop, the macros stop working giving error like THE MACRO " C:so n so... CAN NOT BE FOUND!
