Everytime I open the excel file I am working on I get a message saying that the file contains macros.
I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.
I have several workbooks that use macros from my personal macro library (MyExcelAddIns.xlam).
Some of these, especially new ones, get an error message every time I save them: "Privacy warning: This document contains macros, ActiveX controls, ... These may contain information that cannot be removed by the Document Inspector."
Then after I save it once or twice, the message goes away. Why am I getting this message? Why only sometimes? What can I do to get rid of it entirely?
I have a lot of links on my excel page, links going to videos. Everytime I click the link, I have this message :
"there might be viruses... are you sure you want to open this file?"
I know there must be a way to take this message off : I worked with it for months, and then it suddenly disappeared. But now that I formatted, it's back again
I have an excel sheet there i am maintaining the details of our sales invoices. Invoice no is in the column D . My concern is while entering a new number in the column D, excel should look at the entire column and give an error message if the no is already exixting in the column.
I have a range of cells and I would like a warning message to pop up if a value over 0.1 is entered. I'm sure it is pretty easy to do, just can't find any info on here and I'm not great with Excel.
I have this problem: I have a workbook with a formula liniking to another workbook. When I open the workbook, I click on "update links" and then I get this warning message:
"The workbook contains one or more (than one) links that cannot be updated. * To modify the origin of links, or to look up to update the values again, choose Modify links * To open the workbook as it is currently , choose To Continue"
I cannot understand where is the problem, the link is updated, state of link is "ok", I even can open the origin from Modifiy menu --> link --> open origin
We are using Excel 2007. The person I'm trying to help has a column with dollar figures format as Number with the obvious two decimal places. If we go to Home>Find&Select>Find and type in the value EXACTLY as it appears with Look in: changed to Values, it finds all instances of the value just fine.
Now, if I flip over to the Replace tab because she wants this specific dollar figure replaced with another specific dollar figure, my only option under Look in: is Formulas, so trying to perform the replace gets me a warning message that "Microsoft Office Excel cannot find a match".
I am writing a roster spreadsheet and it has cells with drop down lists using validation lists to fill in the start and finish times, as we run a nearly 24 hour business it is possible to accidently start someone at 2.00am and finish them at 10.00pm. In the cell which calculates the time rostered I want it to display a messagebox if the hours exceed 10 hours or go into negative.
I need to "wife proof" this sheet as this stuffs up the total calculated hours and total costs.
Would I do this through validation on the cell with the formula calculating the times orr though a macro on the sheet module?
I have a macro here that turns exported text into delimited text, but it keeps prompting the user "Do you want to replace the cells"...can I somehow automatically bypass this prompt and always say yes?
When I use list validation with name (Data validation List. Inseret name difine) and then trying to write manualy a differnt value (not from the relevant list) I am not being warned like I get when I choose a list . And then even when I have a list or a Name If I copy a diffrent value I am not being warned.
When you enable macros the sheets 2, 3, 4 ect are visible but if you disable macros, you only see sheet 1 and and you can place a message on the sheet saying this will only work with macros enabled.
I was playing around with Macros on an excel file. I created a few and ran them. In the end, I didn't like the way they ran, so I deleted them all. However since I ran them in the excel file, every time I open the file it gives me a warning saying "Macros have been disabled."
Is there any way to remove the possible Macros ties/links from my file? I know I can disable the warning, but if I just want to remove the Macros ties to my file.
I have a couple spreadsheet Excel 2003 that I have to Email, I use a few macros with these spreadsheets. The Macros are kept in my personal workbook. When I Email these sheets does the end user see the warning enable macros or do they just see the sheet as is. I am mailing the whole workbook but macros are in my personal workbook. If they see the warning is it possible for me to Email so they will not have to contend with that?
I would like the security warning not to pop up when the workbook is opened. I have been able to turn it off for myself but I had someone else test it and each time it's opened the security warning pops up with the disable, enable messages. Is there a way to turn this off permanently so not matter who opens it it won't pop up?
I am attempting to have a pop message display when users of a certain form "X" out of the form. Below is what I came up with but it does not seem to be working:
Code: Private Sub IntroUpdate_BeforeClose(Cancel As Boolean) Call MsgBox("User closed the program before any formulas were updated.", vbExclamation, ".: ALERT: FM Program Tabs :.") End Sub
Currently the above is in the code section of the form (titled: IntroUpdate).
Also if the form unloads I do not want the message displayed - only in the event that a user "X" out of the specific form titled: IntroUpdate).
I am looking for a macro that will find identical adjacent cells and merge them automatically without the standard warning prompt (of only retaining the data in the upper left cell). In the following attached example, on the worksheet 'Control', the button 'Automerge' should find all the identical cell groupings in the entire table and merge them immediately without a warning.
I'm making a little calculator thing for some of my colleagues, and I've created a warning sheet at the front in case their macro security is set to high or they disable macros.
The thing is, when the workbook is opened with macros enabled, and when it's closed, this warning sheet flashes briefly. Is there any way to avoid this?
My code is:
Private Sub Workbook_Open() Worksheets("Form").Visible = True Worksheets("Form").Activate Worksheets("Enable macros").Visible = False UserForm1.Show End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean) Application.ScreenUpdating = False Worksheets("Enable Macros").Visible = True Worksheets("Form").Visible = False Me.Save Application.ScreenUpdating = True End Sub
I'm using Excel 2003 and recently when I open a file, it prompts out a Security Warning message about Marcros which at the end contains 3 choices: Disable Macros, Enable Macros, and More Info. I then click Enable Macros to open the file. Once open, I go to Tools > Marco > Run Marco (Alt+F8). A Macro box prompt out but the Macro list is empty. I try different choice inside the pull down menu "Macros in" but the Macro list is still empty.
Where can I find out the macro which triggers the warning message of Security Warning when opening the file? And how can I delete the macro if found useless.
I am using Windows 7 and have a piece of code that brings up a warning message after 20 minutes to warn the user they have been in a workbook for too long.
If they have the Excel application window minimized, is there a way to get Excel to take the application out of minimized mode into max screen, before revealing the message.
Currently when the warning message activates, the excel icon just flashes in the start bar. Some users may not see this.
Here is the code I have so far:
[Code] ....
I have already tried simply adding a piece of code with maximize screen, however this doesn't seem to work.
i want my application which i build though VBA in excel run on every computer without prompting for any Macros security message so is there any solution?
Note: It should also be noted that, when "splitting" the macros below up into two different macros, they work, but then I have to play 2 macros when I only want to play one.
Just when I thought I was getting this macro stuff, I've come back to reality. I tried to combine these 2 macros together (taking out 1 "sub" and 1 "end sub") and when doing so, I got the error message
"duplicate declaration in current scope"
I thought about removing some "Dim" lines, but realized that the Dims say different things. For example in macro 1, it says "Dim Rng As Range" and in macro 2, it says "Dim Cust As Range".