I want to select the cell under the last cell of a particular worksheet and use the filldown function. This is the code i am tryin to use but won't work
Worksheets("CD").Range("A1").End(xlDown).Row + 1.Select
Selection.FillDown
I have a worksheet that when a row changes based on the value of column B, I want to remove all of the formulas found in the row but keep the existing values, and then change the color of the row.
In the sample file attached, when the value is "Closed", that row will keep the existing values and then it gets grayed out. Rows that are still marked "Open" need to retain the formulas in case other information changes.
I have tried copy/paste special using autofiltering but that doesn't work because of the hidden lines. This file changes on a daily basis and I need a quick way to update the file.
SampleFile.xlsx
I have sheet "MySheet" with data in range A1:B200, when i change or select value in combobox, my textbox will fill. But i need return respective rows in column A inside textbox.
VB:
Private Sub ComboBox_Change() On Error Resume Next
TextBoxCod.Value = WorksheetFunction.Index(Range(MyRange"), ComboBox.Value, 1)
End Sub
There are two columns of data. Column A is "Group name" and is initially empty. Column B is a list of words
Here is what I am trying to do:
1) prompt the user for 3 input values
2) input value 1 and 2 are COMMON words that i wish to filter through in column B with "filter contains" value 1 or value 2
3) after the filter, i wish to select ALL VISIBLE cells in column A and append the Group Name to each cell
Arised from my earlier posting in Populate ComboBox With Specific Sheet Column Range. I have the following working code below, but am having trouble finding coding examples to select specific cells from the selected row (that was found by selecting a ComboBox value)and update TextBoxes with those individual values after the UserForm has been initialized (the bold "GREEN" comment in the code below). I have been able to find plenty of references to update TextBox values to Cells, but that doesn't do me much good in this application since the User needs to verify the old data in these cells before updating them using the UserForm TextBoxes.
I was toying around with several different variations of code (none of which worked properly), so I left it out for clarity of my working code. I'll post up this non-working code as needed, because I really wanted a fresh answer...not what I was trying to do. The attached file should be sufficient to see what's going on
Private Sub UserForm_Initialize()
With Sheets("SR Information")
.Range("A2", .Cells(Rows.Count, "A").End(xlUp)).Name = "MyRange"
End With
SRnumber.RowSource = "MyRange"
End Sub
Private Sub SRnumber_Change()
Dim ServiceRequestNumber As String
Dim c As Range
Dim rngG As Range
Sheets("SR Information").Select
With Selection
ServiceRequestNumber = SRnumber.Value
For Each c In Intersect(ActiveSheet.UsedRange, Columns("a"))
If c = ServiceRequestNumber Then..................
I am kind of new to Excel programming and would like to know if there is a solution to my problem. What I need is to have a dropdown list (I know how to make this) then select an item from the drop down, then based on the name i select, Excel automatically fill up the rest of the cells.
For example, from the drop down list I select the company name then Excel automatically type the address, phone number, Fax number and the contact name of the company for me in corresponding cells. Is there a way to do this?
i'm having a problem with a script I have (script is below). What i'm doing is running a script that displays files in a certain folder, those files are then displayed on sheet1 column O and are linked so when they are clicked upon, the file will open. I also have a combo box with a input range of $O$O. That puts the values in column O in the combo box. Now here is a problem and request.
Problem first, when I select the file names from the combo box, they don't open the file, all it does is display the file name in combo box and that's it. how to I get it to open up the file? Now for a request, I have another sheet that is almost exactly as the one i described above. The only thing different I want is when someone clicks on a file name from the combo box, instead of it automatically linking to the file, I want them to click on a button to display the file.
Sub HyperlinkXLSFiles()
ActiveSheet.Unprotect
Dim lCount As Long
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
With Application.FileSearch
.NewSearch
'Change path to suit
.LookIn = "c:Sec"
.FileType = msoFileTypeExcelWorkbooks
' .Filename = " Book*.xls"..................
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have a database (spreadsheet) which has 3 to 4 dozen columns of data. This data is in Sheet 2. On sheet one I would like to have a form which organizes the data on one sheet from sheet 2. I would like to have a drop down box to select the country. Once country is selected all data to the right of country would then be automatically filled on Sheet 1. see attached example.
View 2 Replies View RelatedI have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
I'm trying to loop through a list of about 1300 items and copy the rows where one of the cells has a fill color to 2 different sheets in the same workbook. If there's no fill color, the row moves to a different sheet.
My code is determining that all cells have a fill.
For Each cell In Range("Classification")
If cell.Interior.Color blank Then
cell.Select
Range(Selection, Selection.Offset(0, -9)).Copy Destination:=Range("Compliance")
Range(Selection.Offset(0, -5), Selection.Offset(0, -9)).Copy Destination:=Range("Mstar")
Else
cell.Select
Range(Selection, Selection.Offset(0, -9)).Copy Destination:=Range("RP")
End If
Next cell
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red
blue
yellow
green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.
Source tab contains vital information about some clients.
In the aggregated tab (Cell C10) I created a formula that pulls the Inflows from the source in a very specific array. So for client 1, this works fine. Now, if i copy my formula to the client 2 (Cell C14), it obviously wont go and look in the correct array in my source.
What i need to do is to be able to copy/paste my formula
[Code].....
(from cells C10 to CC10) to cells C14 to CC14, but when copied, the look up array changes to:
Formula: [Code] ....
I will have to fill this formula to at least 100 entries down, so i need to make it work with ease
The good thing is that all look up values in the source increase by a fixed number of rows (12). I tried playing with index/rows formula.. no luck..
Attached File : samplev1.xlsx
I need to achieve the situation below with a formula. I have tried simply doing, for example, = B3+1 but this throws an error, probably because the value being checked is alphanumeric.
Data
A001
Data
A002
Add next number (A003) when data entered in cell to left
how to enter data in non-adjacent cells using a fill command.
Here is what I am trying to do:
in the column, I am holding ctrl button to select every 10th cell down the sheet. I need to enter a date in every selected cell that is exactly 7 days apart, i.e., 11/7/08 then 11/14/08 then 11/21/08, etc.... but no other dates or data.
I have tried to figure out a way to do this other than manually, but am confounded.
How do I write this formulae ??
For cell range M6:AV6 fill with N/R If the data in cell D1 = Wont have
I have a table:......
I want to colour in the relevant cells for each ref depending on the numbers in the stage column. So for the first line, the cells in columns 1,2,4&6 need to be shaded in. For the second line, the cells in columns 1,2,3,4,&5 need to be shaded in. I already have a lot of conditional formatting set on the sheet so need to do this with a macro.
I have tried to write something but am having issues with it finding the 1 and shading in the correct column but then jumping out of the loop and on to the next cell.
I am looking for advice on how to move cells containing data (columns D to K in EXAMPLE A), upwards so that the information lines up with data already existing in columns A to C (to be included as part of an overall VBA routine).
In the upper example data in cell D2 needs to move upto D1, E3 to E1, F4 to F1, G7 to G1 etc and K9 to K1. Now, data on following rows is to move upto row 2 eg: E5 to E2, F6 to F2, G8 to G2.
The first 'block' of data starts at row 1 and finishes in this case at row 9.
The next 'block' of data starts at row 10 and finishes at row 18.
Row 19 shown is the start of the next 'block'. These 'blocks' may have upto 20 rows ....
Is there anyway to automatically fill the empty added cell after inserting a row without using the fill handle? For example, for a series of numbers: [URL]
2. Drag the fill handle Selected cell with fill handle across the range that you want to fill.
Or running balance: [URL]
2. Extend the running balance formula into the new rows by selecting the last cell in the balance column and then double-clicking the fill handle.
I would like to auto populate a cell (A2) due to the input results from another (A1).
For example, if I enter A1 with "100%" then I want A2 to auto populate with "Complete". And just the same for other percentages; if A1 was input with any range from 1% to 99% it would populate A2 with "In Progress". And if A1 was to equal 0% then A2 would be "Not Started".
I have a worksheet with running macros which hides & unhide rows based on input of data in yellow highlighted cells (see attached). I'm trying to make all cells mandatory. The below code works but I run into problems when certain cells made mandatory are hidden. For example if I select "Expense" as Type of Expenditure in the attachment cell C10 & C11 are hidden so if its mandatory I won't be able to move forward to next cell.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Application.EnableEvents = False
Me.Unprotect "dawnwh81"
Dim myCell As Range
Dim myRange As Range
[Code]....
i'm trying to ask my spreadsheet to fill a cell with either 'YES' or 'NO' depending on the value of one cell. I've succeeded in getting it to enter 'YES' but can't figure out how to tell it to choose between the two options. This is the formula so far
=IF(L5>2,"YES")
I have certain values in cell B4 to B2000. There are 25 unique values in those cells. In cells A4 to A2000 I would like to put a identifier (lets say a letter from A to Y) based on the adjacent B4 to B2000 cell values. I can't use a IF function because I am way over 7 allowed in excel. I could use a vlookup but that seems to slow down the file quite a bit. Is there something else better/faster out there?
View 3 Replies View RelatedI need to be able to fill in the day automatically when a date in entered
c1 (i type in) 15/3/07
then in a1 the day i listed by the formula =c1 and formatted to "ddd"
so i only type in the date and it fills in the day cell automatically down the rows are i enter new data
Fill the corresponding cell with last value entered?
View 9 Replies View RelatedI'm making a Purchase Order generator for work. Essentially, the main screen has buttons and the user selects the company, job number, their name etc. They click 'Generate' and it will great a brand new excel file for them with all the correct codes, ready to populate and send to a client. In the main sheet, we also have a master list showing every purchase order made to date. This is where I am currently stuck. I will have many more questions on the way. This is my first program so very new!
Lets say we have the following in cells A1 and A2. The rest is blank:
REQ0001
REQ0002
[Code] .......
I have a list of product codes. Some of the cells in this list are blank, and it is assumed that the blank row is the same product code as the one above it. Is there a formula I could use to have the cells fill themselves in?
Example
DO-566
DO-566
<Blank Cell>
DG-233
<Blank Cell>
<Blank Cell>
..........
I've tried the following, but it only yeilded each of the cells having the same values. =if(isblank(A2),A1,A2). With this, I allowed circular references, but it still yeilds that same result stated above.
I have lot of data in column B. I need to copy the first cell and paste content to next ones before empty cell.
Replacing xxx with the data in first cell all the way to the end of column B.
Before:
After :
123-1
123-1
xxx
123-1
[Code] ........
I have a spreadsheet with alot of information about a product. One column, is used to fill in a price that the item is going to be and in the column next to it, I show the date this change will happen.
What I need is another column (that has a price written on it already) to change and put in the price found in the "new price" column, if the date is equal to the column which show the date the price will change.
Example:
A
Item
B
Item's current Price
L
Item's increased price
M
Date increase will happen
I want "B" to change and reflect what "L" is reading when the date is the same as what is entered in "M".
Can that be done?
I am creating a form for others to fill in. But they don't fill it completely.
So i want to force them to
If they fill in Cell G31 or H31 they must also fill in cel F31, before it will save the document.
If they try to save the file without F31 filled, it should give a messagebox that
says: Fill in Volume.
Privatesub Workbook_BeforeSave(ByVal SaveAsUi As Boolean, Cancel As Boolean)
Dim msg As String
If Not Worksheets("Sheet1"). Range("G31").Value Like "##" then
msg = "Befor saving, fill in Volume."
Cancel = True
End If
If Not Worksheets("Sheet1").Range("H31").Value Like "##" Then
msg = msg & vbCrLf & "Before saving, fill in Volume."
Cancel = True
End If
If Cancel Then
MsgBox msg
End If
End Sub
