I need to be able to fill in the day automatically when a date in entered
c1 (i type in) 15/3/07
then in a1 the day i listed by the formula =c1 and formatted to "ddd"
so i only type in the date and it fills in the day cell automatically down the rows are i enter new data
How do I write this formulae ??
For cell range M6:AV6 fill with N/R If the data in cell D1 = Wont have
I have a table:......
I want to colour in the relevant cells for each ref depending on the numbers in the stage column. So for the first line, the cells in columns 1,2,4&6 need to be shaded in. For the second line, the cells in columns 1,2,3,4,&5 need to be shaded in. I already have a lot of conditional formatting set on the sheet so need to do this with a macro.
I have tried to write something but am having issues with it finding the 1 and shading in the correct column but then jumping out of the loop and on to the next cell.
Source tab contains vital information about some clients.
In the aggregated tab (Cell C10) I created a formula that pulls the Inflows from the source in a very specific array. So for client 1, this works fine. Now, if i copy my formula to the client 2 (Cell C14), it obviously wont go and look in the correct array in my source.
What i need to do is to be able to copy/paste my formula
[Code].....
(from cells C10 to CC10) to cells C14 to CC14, but when copied, the look up array changes to:
Formula: [Code] ....
I will have to fill this formula to at least 100 entries down, so i need to make it work with ease
The good thing is that all look up values in the source increase by a fixed number of rows (12). I tried playing with index/rows formula.. no luck..
Attached File : samplev1.xlsx
I have certain values in cell B4 to B2000. There are 25 unique values in those cells. In cells A4 to A2000 I would like to put a identifier (lets say a letter from A to Y) based on the adjacent B4 to B2000 cell values. I can't use a IF function because I am way over 7 allowed in excel. I could use a vlookup but that seems to slow down the file quite a bit. Is there something else better/faster out there?
View 3 Replies View RelatedThe attached worksheet explains what I'm trying to do much better than I can.
My data is like Sheet 1 and I need to 'fill' it like Sheet 2.
I have about 5,000 rows over 17 columns. The attached is just an example.
match dates.xlsx
refer to attached worksheet. If value in D7 is less than zero; then D8 = 0%
If D7 > 0, then D8 = value in C8, and this value must also be copied into 9 adjacent cells in row 8 from D8 onwards.
I have a dilemma.
1.I want to be able to a have a cell be filled with a certain value when the user enter data in Column C.
2.I know that this can be accomplished by a formula, but my spreadsheet will work my efficiently with a macro.
3.I do not know much about VBA but I believe that I will need a macro for each sheet that fills in the word.
I am looking for a way for Excel to fill in cells in a column that has data sporadically in it. I am importing a text file into excel and saving it as an Excel file.
In the example attached, I need the numbers filled in all the way down to the next number. I don't care about the text, just the numbers. I realize I can copy and paste, but these files can be several hundred rows long and it seems there should be a better way.
I am trying to create a macro to fill Sheet1 cells A1 through P1 down, and I would like it to be filled down based on the number in Sheet2 cell R1.
View 4 Replies View RelatedI'm using Excel 2003- and I am trying to change the fillColor of a cell based on the value of that cell.
11111122222222233333333344455555555555556666777888
If I use Conditional Formatting I can only use 3 colors, I'd like to use 8 or 9. Is there another way to do this without using the Conditional Formatting?
I'd like the result to look something like this-
11111122222222233333333344455555555555556666777888
I've looked at the similar threads in this Forum, but I couldn't find exactly what I needed.
I read in a book that if you enter a formula in a cell, like cell A1 contains
=rand() for instance, that if you select Go on the menu tab, and then enter the final destination cell or range (ex: A1,A200), then hit ctrl+Enter simultaneously, it will fill the formula down to that cell. I can get it to select the range, by hitting Shift+Enter, but not copy down the formula using Ctrl+Enter, or Ctrl+Shift+Enter. I am using excel 03, XP. It only returns blank values for the range.
I have written a macro that creates a new spreadsheet and copies text into it. The number of rows varies depending on the input.
Yet, running the macro results in a sheet with the max rows (65k+). This is unmangeable, as it makes it a huge file and size and harder to print.
I only want there to be the number of rows that have text in them.
The larger problem is how these were even created in the first place. Currently:
' Formula for Job Name
Range("A2").Select
ActiveCell.FormulaR1C1 = "=LEFT(RC[12],8)"
' Fill Job Name
Range("A2").Select
Selection.AutoFill Destination:=Range("A2", Cells(Rows.Count, "A")), Type:=xlFillDefault
I want to highlight the cell of Column 'A' of excel only when it does not contain the text like "Verify", "Validate" or "Evaluate" in its content if, the value in corresponding cell of Column 'B' holds the value 'Y'. Secondly, the column 'A' can't contains the words like 'Verify', 'Validate' and 'Evaluate' if the corresponding cell in Column 'B' holds value 'N'. So just need to highlight those discrepancies if its there.
Column A
Column B
Expected Action
Press F3
N
Its Fine
Verify this..
Y
Its Fine
this....
Y
Need to Highlight Cell of Column A as Value in Column B is Y but the column A does not contain any value like "Verify", Validate" or "Evaluate"
Verify This.
N
Need to Highlight Cell of Column B as the Value of Column A contains words like "verify", "validate", "evaluate" but corresponding cell value in column B does not hold value "Y".
When I enter barcode X in cell A1, I want B1 to say supplier and C1 to say product name and D1 to say package quantaty etc.
And if I enter barcode Y in cell A2, I want B2 to say different supplier, and so on, hopefully you get the picture.
A have three columns with "Kilograms range" and corresponding value.
A========== B========== C
KG From====-To======= Predefined Value
what formula will fill up the cell with the predefined value automatically based on the range, after a kilograms are entered in a different cell as explained in the attachment.
I'm trying to discover the best way to accomplish formatting a cell by filling it a certain color based on 2 of 3 criteria of other cells.
Column A has the title of the field. Cells B1:D1 have one of 3 values: Nothing/blank, Complete, or x. If all of the x's are gone within the range of B1:D1, I'd like to automatically format cell A1 to fill in Blue (or any color).
A1__________________B1_________________C1_____________D1
Generic Name______Complete_______________x_____________
If the 'x' in C1 is changed to the value of 'Complete', I'd like A1/Generic Name to be filled in with a color.
I am looking to use a VBA routine so when a Date is added in a cell and a number is in the cell below on running the routine I would like the Date to be filled by serial number to the cells to the right. So if D3 has a date in the cell say 03 July 2014 and E3 has the number 10 then to the right of D3 it fills the Date's 10 Cells to the right 03 July 2014 through to 13 July 2014.
Code:
Dates
03/07/2014
Amount
10
Suppose in cell A1 I type in the number "100" and in A2 I type in the number "5"
What I want to do: Have the number "100" repeat 5 times in a vertical list (so 100 appears in B1, B2, B3, B4, B5)
I have items in a column like below:
Line (A1) asdfasdf
Line (A2) adsfadsf
Line (A3) asdfasdf
What I would like to be able to do is highlight the three columns and fill down, but I would like for it to increment and paste the next three lines filled like this:
Line (A2) asdfasdf
Line (A3) adsfadsf
Line (A4) asdfasdf
Then below that the next three lines filled like this:
Line (A3) asdfasdf
Line (A4) adsfadsf
Line (A5) asdfasdf
The (A1, A2, etc.) are cell ranges and already contain the concatenate function that pulls data from a different location. The problem I am having is when I
highlight and fill down, it doesn't increment the cell by +1 (Ex. A1 beomes A2) but instead by +3 (A1 becomes A4) the number of lines highlighted.
I am desperately find a way to fill down formula from active cell, example given below,
AA
BB
CC
Total
QTY1
QTY2
City 1
5
2
3
10
12
15
[Code] .......
I need to fill down col Qty 1 & Qty 2. Number of Rows and Columns vary in my Work Sheet.
My code below, Ctrl+Enter not works.
HTML Code:
Cells.Find(What:="QTY1").Activate
ActiveCell.Offset(1, 0).Select
ActiveCell.FormulaR1C1 = "=RC[-1]+RC[-3]"
'Fill Down Active Column
Cells.Find(What:="QTY2").ActivateActiveCell.Offset(1, 0).Select
ActiveCell.FormulaR1C1 = "=+RC[-5]*RC[-3]"
'Fill Down Active Column
End Sub
I have a formula
=LEFT(L2,FIND(".",L2,1)-1)
I need a macro to copy this to the last blank cell in the column, the last blank cell will be different each month otherwaise i would have just been able to enter a range L2:L6000.
what is prompting this formula to auto fill down when a value in an adjacent cell is entered.
In column A I enter an unformatted fax number.
In column B I use the following Text Formula:
"="("&LEFT(A20,3)&")"&MID(A20,4,3)&"-"&RIGHT(A20,4)
Someone in my office copied the workbook and now any time a value is
entered into the next available Column A cell. The cell in column B will automatically apply the above formula and format the fax number. The person who copied the workbook does not know how this is working nor does anyone else in the office.
There are no macros embedded in this workbook so no event is firing to cause this.
I have attached a small copy of the workbook called "Auto format1.xls"
How to use:
-Select cell B20 and not nothing is in it.
-Enter any 9 digits in A20 and B20 somehow
copies down the formula from B19.
how to duplicate this.
I need to fill 2 other cells with varying colours dependant on what is chosen within another cell.
I have a drop-down list in cell A2 to select either ON SITE, ACTIVE or CANCEL.
What I need then basically is...
if A2 equals 'ON SITE' then fill other two cells (A3 and B1) GREEN
if A2 equals 'ACTIVE' then fill other two cells (A3 and B1) YELLOW
if A2 equals 'CANCEL' then fill other two cells (A3 and B1) RED
[File attached]
I have a calendar set up with dates going along P6:CU6. Column C9:C27 has various status' for the job such as "Complete" or "In Progress" etc. Next to that in rows D and E I have start and end dates for the job. What I am trying to do is change the fill colour of the empty cells that are in line with each job, so that between the correct dates they are the corresponding colour to the status. So a complete job on row 9 that started on 26/05/14 and finished on 28/05/14 would have three green cells along Q9, R9, and S9.
I have tried an IF/AND/OR statement which looks like this:
=IF(AND(Q6>=D9,Q6<=E9),OR(IF(C9="Planned","P",""),IF(C9="In Progress","IP",""),IF(C9="Late","L",""),IF(C9="Complete","C","")),"")
I am getting a #VALUE! data type error, I have tried reformatting the cells to various date formats but no luck so far. This could be because my dates are set up as =P6+1 etc. but I am not sure. The error only occurs when the cell falls within the dates, otherwise it remains blank.
I intend to hide the value in the cell and use conditional formatting to change the cell colour based on the hidden input.
Once this is working I also need to take weekends into account, column G has any 2 value combination of Y and N to say whether the employee is working Saturday, Sunday or both. Row 7 has a "1" value underneath every Saturday and a "2" underneath every Sunday. I can imagine how this would work but combining it with the above formula could be complicated.
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
I wanted to enter value in sheet1 on A1. Columns in sheet2 from B1 until the value entered in sheet1.A1 should be automatically filled.
E.g.
Sheet1.A1=5, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3, Sheet2.B4=4, Sheet2.B5=5.
if Sheet1.A1=3, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3.
if Sheet1.A1=7, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3, Sheet2.B4=4, Sheet2.B5=5, Sheet2.B5=6, Sheet2.B5=7
etc.
This is a spreadsheet for a real estate office. The boss gave me a spreadsheet that he created to give a seller an idea how much money he will walk away with at closing. The spreadsheet includes all of the pertinate numbers but there is one item that he would like to have filled in automatically. When selling a house, you use a title service that charges a fee based on the price of the house. So, for example, If the house sells for $0 to $50,000, then let's say the fee is $112. If the house sells for $50,000 to $60,000, then the fee is $118. If the house sells for $60,000 to $70,000, then the fee is $125, and so on up to 1.5 million.
The boss' spreadsheet includes 5 different selling price scenarios, which I guess doesn't matter since you do the first one and the rest follow the same pattern.
So how do I automatically fill in a cell based on how one number falls within a range of other numbers? The fee schedule will be within the same spreadsheet, if that matters.
Ideally, I think they should be separate files, but this will be used in various locations as different realtors take it home or use it on their laptops.
refer to attached worksheet.
I need a way (Non-Macro please) - where if a condition is met, then fill a range with a particular value. The attached spreadsheet has a sample with explanation.
I am attempting to write an Excel Macro that would allow me to Click on a particular row and have the fields in my form fill with the data in the columns of the row.
I am fairly new to Macros and VBA, but know that this has got to be a possibility.
